Gasketing Product - multi-purpose flexible silicone sealant. Ideal for use on flexible flanges, machined or cast surfaces, metal or plastic. LOCTITE® SI 5926 is a multi-purpose flexible silicone sealant and cures on exposure to moisture in the air to form a tough rubber gasket. This product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Typical applications include valve covers, timing gear covers, differential covers, oil pans, transmission pans, water pumps, and thermostat housings. This product is typically used in applications with an operating temperature range of -54°C to 204°C. Multi-purpose flexible silicone sealant. Can be used on metal, plastic and painted parts Resists vibration, thermal expansion and contraction Operating temperature range of -54°C to +150°C.
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Resistant to a wide range of fluids including most fuels, oils and lubricants. Use on gaskets and metal surfaces. Temperature Range: -50 to 250°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Forms a tough, durable and flexible rubber seal. Replaces traditional gaskets. Resists most common automotive fluids (not fuel). Bonds to metal, glass, rubber, plastics and more. Temperature range: -50 to 250°C.
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Gasketing Product - general purpose. Ideal for use on machined and rigid metal flanges LOCTITE® 574 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flanged connections. The nature of LOCTITE® 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance. Excellent water and glycol resistance Ideal for use on rigid metal parts, e.g. cast iron components and pump housings High oil resistance
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Hylomar semi-hardening gasket joining compound Excellent at gap filling Resistant to steam and automotive fluids: petrol, oil, water and anti freeze Joints easily dismantled for service and repair Temperature range: 40 to 250°c
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Medium strength gasketing product for machined metal flanges where semi-flexibility is required. LOCTITE® 5208 is a medium strength (6 N\mm² tensile shear strength), methacrylate-based gasketing product that offers semi-flexible capability. Intended for use with machined, rigid metal flanges, the product is suitable for gaps up to 0.125 mm and cures anaerobically. It is used typically as a form-in-place gasket on gearboxes and engine casings. Medium strength, semi-flexible Seals close fitting joints Designed for machined metal flanges
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
Medium strength gasketing product for machined metal flanges where semi-flexibility is required. LOCTITE® 5205 is a medium strength (3 N\mm² tensile shear strength), methacrylate-based gasketing product that offers semi-flexible capability. Intended for use with machined, rigid metal flanges, the product is suitable for gaps up to 0.25 mm and cures anaerobically. It is used typically as a form-in-place gasket on gearboxes and engine casings. Medium strength, semi-flexible For gaps up to 0.25 mm Designed for machined metal flanges Can be dispensed robotically
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
Metallic black, 1-part, thixotropic, room temperature vulcanizing oxime silicone paste sealant. LOCTITE® SI 598 is a metallic black, 1-part, thixotropic, room temperature vulcanizing oxime silicone paste sealant. It cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. It resists ageing, weathering and thermal cycling without hardening, shrinking or cracking. This product is typically used in applications with an operating range of -54 to +260°C. Enhances load bearing & shock absorbing characteristics of the bond area Excellent resistance to automotive engine oils Typical applications include oil pans, transmission pans, valve covers, valves and guides, timing gear covers, and differential covers
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Silicone-based gasketing product suitable for various substrates. Good resistance to oil and joint movement. LOCTITE® SI 5900 is a low strength, moisture-cured, thixotropic silicone-based paste. Typical applications include stamped sheet metal covers (timing covers and oil sumps). It exhibits a rapid skin-over time of 15 min and is suitable for gaps up to 1 mm. As a single component it requires no mixing. Good oil resistance Withstands joint movement Reduces migration of liquid after application Adheres to metal, plastic, glass and ceramic materials
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
LOCTITE® 518 is a medium-strength, general purpose gasketing product with excellent contamination tolerance. Ideal for use on casted iron, steel and aluminium flanges. LOCTITE® 518 cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. LOCTITE® 518 fills gaps up to 0.25mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings. Semi-flexible, medium-strength anaerobic flange gasket For active and inactive rigid metal flanges Cures through minor surface contamination Adapts to flange surface irregularities and gaps up to 0.25 mm Gel-type consistency Seals instantly against low pressure Reduces inventory costs – no need for large inventory of cut gaskets Resists high pressure when fully cured No compression set or misaligned gaskets Easy to automate Reduces process costs – eliminates manual assembly of conventional gaskets NSF P1 Reg. No. 123758
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
Flexible sealant paste that changes to a pliable, non-hardening film through solvent evaporation which seals flanges, fittings, connections, etc. LOCTITE® MR 5922 is a black, viscous, solvent-based, slow drying, flexible setting paste that changes to a pliable, non-hardening film through solvent evaporation. It is based on resin, isopropanol and fillers. It seals flanges, fittings, connections and flexible assemblies against leakage. It increases the reliability of gasket seals and it can be used for the repair of damaged pre-cut gaskets. Extends gasket life Prevents leaks Slow drying Specifically designed to improve the sealing performance of pre-formed gaskets made of cork, metal, plastic, rubber, etc. in non-rigid assemblies Flexible setting Increases the reliability of gasket seals
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
LOCTITE® SI 5910 is a low strength gasketing product for flexible flanges that has good resistance to oil and joint movement. LOCTITE® SI 5910 is a low strength, silicone-based gasketing product designed for use on flexible flanges with machined or cast surfaces (metal or plastic). It is suitable for gaps up to 1 mm and offers a cure-through volume (in 24 h) of 2.75 mm. Typical applications include stamped sheet metal covers (timing covers and oil sumps). Good resistance to oil and joint movement Can be supplied in cartridges, tubes or rocep cans For use with flexible flanges Reduces migration of liquid after application
Shipping Costs...
|
|
Add
|
LOCTITE® 510 is a high temperature and chemical resistant gasketing product that is ideal for use on rigid flanges. LOCTITE® 510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing rigid flange faces on transmissions and engine casings. It ensures an instant, low-pressure seal. The product increases the torque capacity of assembled flanges. For metal flanges High temperature resistant flange gasket Adapts to flange surface irregularities and scratches up to 0.25 mm Increases the torque capacity of assembled flanges P1 NSF Reg. No.: 123007
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
Gasketing product for machined metal flanges. Medium strength. For gaps up to 0.25 mm. 30 min fixture time. LOCTITE® 515 is a medium strength (6 N\mm² tensile shear strength), medium cure speed, methacrylate-based industrial gasketing product designed for machined, rigid metal flanges. The product, which cures anaerobically, is suitable for gaps up to 0.25 mm. It is used typically as a form-in-place product for pumps, thermostats, compressors, transmission housings and axle covers. Ideal for machined metal components Perfect seal between components For gaps up to 0.25 mm
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Bondloc B510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal parts. B510 has high temperature and chemical resistance and provides an instant low pressure seal. Typical applications include sealing rigid flange faces on transmissions and motor casings. Suitable for surface imperfections up to 0.25mm. Colour: Pink Viscosity: 40,000 - 140,000cps Gap Fill: 0.25mm Tensile Strength on Steel: <special id="2430"/<>Greater Than 5Nmm2 (ISO 4587) Fixture Speed: 15 mins - 2 hours with activator Full Cure Time: 12 hours Min Max Temp: -55°C - +230°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Bondloc B515 is a flexible, medium-strength gasketing anaerobic sealant that cures when confined in the absence of air between close-fitting metal parts. B515 is medium strength Industrial gasketing product and provides an instant low pressure seal on machined and rigid metal parts. Typical applications include pumps, thermostats, compressors, transmission housings and axle covers. Colour: Purple Viscosity: Paste Gap Fill: 0.3mm Tensile Strength on Steel : Less than 6Nmm2 (ISO 4587) Fixture Time: Less than 35 mins Full Cure Time: 12 hours Min Max Temp: -55°C - +150°C
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
Bondloc B515 is a flexible, medium-strength gasketing anaerobic sealant that cures when confined in the absence of air between close-fitting metal parts. B515 is medium strength Industrial gasketing product and provides an instant low pressure seal on machined and rigid metal parts. Typical applications include pumps, thermostats, compressors, transmission housings and axle covers. Colour: Purple Viscosity: Paste Gap Fill: 0.3mm Tensile Strength on Steel : Less than 6Nmm2 (ISO 4587) Fixture Time: Less than 35 mins Full Cure Time: 12 hours Min Max Temp: -55°C - +150°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Bondloc B518 cures when air is excluded between close-fitting metal surfaces. B518 is a semi-flexible medium strength gasketing product recommended for use on rigid iron, stainless steel, aluminium, and steel flanged jointed surfaces. Fills gaps up to 0.25mm and is chemically resistant. Ideal for use on rigid metal faces and flanges i.e. pumps, motor housings and transmissions. Colour: Red Viscosity: 200,000 - 800,000cps Gap Fill: 0.25mm Tensile Strength on Steel: Greater Than 5Nmm2 (ISO 4587) Fixture Speed:Less than 2 hours with activator Full Cure Time: 12 hours Min Max Temp: -55°C - +150°C
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
Bondloc B574 cures when air is excluded between close-fitting metal surfaces. B574 is a general purpose medium-strength gasketing product for use on machined and rigid flanges. B574 is an Instant gasket which provides instant pressure resistance and has excellent chemical resistance. The thixotropic formula helps reduce the migration of the sealant after application to the mated surfaces. Ideal for gearbox sealing, pump flanges, transmission assemblies, cover plates on tanks, cam shaft sealing and bearing gaps. Colour: Orange Viscosity: 30,000 - 50,000cps Gap Fill: 0.3mm Tensile Strength on Steel: Less than 8.5mm2 (ISO 4587) Fixture Time: Less than 30 mins Full Cure Time: 24 hours Min Max Temp: -55°C - +150°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Non-cracking formulation ideal for engine gaskets, cylinder heads, water pumps, gear boxes, threaded assemblies, flanges and pipe joints. Colour : Blue Base : Solvent Viscosity : 5,000cps Gap Fill : 0.5mm
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Can be used on all types of engine components withstanding constant temperatures up to 270°C and intermittent temperatures up to 350°C. Colour : Red Base : Solvent Viscosity : 6,500cps Gap Fill : 0.5mm
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Forms a tough, flexible gasket or seal that resists ageing, weathering and thermal cycling without hardening. Ideal for oil pans, transmission pans, differential covers, timing gears and valve covers. Suitable for sealing aluminium and metal ducting, refrigeration applications and hygiene seals. Colour : Black / Red Base : Acetoxy Viscosity : Paste Min Max Temp : -55°C - +350°C (Intermittent) Skinning Time : 5 mins 20°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Resistant to a wide range of fluids including most fuels, oils and lubricants. Use on gaskets and metal surfaces. Temperature Range: -50 to 250°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Resistant to a wide range of fluids including most fuels, oils and lubricants. Use on gaskets and metal surfaces. Temperature Range: -50 to 250°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|