Constructed of high density polyethlene for extra strength. Angled
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Plastic Jerry Can (5 litre). Colour: Green. Supplied with a flexible spout. Conforms to S1 1982/630.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
BUCKET-PLASTIC-15L
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Supplied with lid & flexible spout.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Supplied with lid & flexible spout.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Supplied with lid & flexible spout.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Contains: S.6390 x 1 pc., S.6392 x 1 pc. & S.27380 x 1 pc.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Contains: Ø50mm (2'') x 1 pc. Ø75mm (3'') x 1 pc. Ø95mm (3, 3/4'') x 1 pc. Ø115mm (4, 1/2') x 1 pc.
Shipping Costs...
|
|
Add
|
Plastic
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Ferrules for oil/fuel resistant hose. Hose OD: 16.0mm Hole Ø11.3mm
In stock (for delivery only)
Shipping Costs...
|
(per 10)
|
Add
Min.(Qty)
10
|
Ferrules for oil/fuel resistant hose. Hose OD: 18.0mm Hole Ø13.4mm
In stock (for delivery only)
Shipping Costs...
|
(per 10)
|
Add
Min.(Qty)
10
|
Uses include fitting between lift pump & injector pump to stop fuel drain down, which will assist quick starting
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Ferrules for oil/fuel resistant hose. Hose OD: 14.5mm Hole Ø9.3mm
Shipping Costs...
|
(per 10)
|
Add
Min.(Qty)
10
|
Ferrules for oil/fuel resistant hose. Hose OD: 17.0mm Hole Ø11.3mm
Shipping Costs...
|
(per 10)
|
Add
Min.(Qty)
10
|
Ferrules for oil/fuel resistant hose. Hose OD: 22.0mm Hole Ø16.9mm
In stock (for delivery only)
Shipping Costs...
|
(per 10)
|
Add
Min.(Qty)
10
|
Banjo Fitting. Nominal I/D: 2mm. Hose I/D: 4.50mm. Hole Ø8mm
Shipping Costs...
|
(per 5)
|
Add
Min.(Qty)
5
|
Banjo Fitting. Nominal I/D: 4mm. Hose I/D: 5.50mm. Hole Ø14mm
In stock (for delivery only)
Shipping Costs...
|
(per 5)
|
Add
Min.(Qty)
5
|
Banjo Fitting. Nominal I/D: 6mm. Hose I/D: 7.50mm. Hole Ø14mm
Shipping Costs...
|
(per 5)
|
Add
Min.(Qty)
5
|
Banjo Fitting. Nominal I/D: 8mm. Hose I/D: 9.00mm. Hole Ø16mm
In stock (for delivery only)
Shipping Costs...
|
(per 5)
|
Add
Min.(Qty)
5
|
Constructed of high density polyethlene for extra strength. Supplied with Filter S.5594
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
The B10-AL BSP fuel filter will withstand 150 PSI pressure Gravity flow is 10 GPM with 30'' headand clean element Suitable for use with S.8457 hose assembly Inlet/Outlet ports are ''1 BSP Spare Filters S.73154 (10 Micron Fuel) S.73155 (10 Micron Water Block)
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Connect a hose to the outlet nozzle and immerse the complete pump in liquid. Connect the battery clips to the battery terminals (+) positive to (+) positive and (-) negative to (-) negative (if powering from a vehicle battery do not use with the engine running). The pump will deliver immediately. For an in-line installation unclip the filter to expose the inlet nozzle, connect length of hose between the tank and nozzle. The pump must be fitted below the tank. Avoid dry running for long periods. For drinking water applications sterilise regularly. Store away from excessive heat and direct sunlight to avoid external damage. If the pump fails to perform, check for blockages (including filters), leaks and correct hose & electrical connections. Pumps fresh and sea water. Rapid diesel refuelling and transfer with no spillage (NOT suitable for Petrol). Bilge pump-out in tight areas. Water Transfer; Deck showers; Deck, Anchor & general Wash-down. Robust, slim line with clip-on easily cleaned filter.
Shipping Costs...
|
|
Add
|
Straight Reducing - 10x6mm Suitable for Brake Fluid, Diesel Fuel & Oil, Heating Oil, Hydraulic Fluid, Coolants, Engine Oils and Water. Temperature range+20°C to +50°C Material Acetalcopolymerisate (POM)
Shipping Costs...
|
(per 5)
|
Add
Min.(Qty)
5
|
Straight Reducing - 10x8mm Suitable for Brake Fluid, Diesel Fuel & Oil, Heating Oil, Hydraulic Fluid, Coolants, Engine Oils and Water. Temperature range+20°C to +50°C Material Acetalcopolymerisate (POM)
In stock (for delivery only)
Shipping Costs...
|
(per 5)
|
Add
Min.(Qty)
5
|
Straight Reducing - 12x8mm Suitable for Brake Fluid, Diesel Fuel & Oil, Heating Oil, Hydraulic Fluid, Coolants, Engine Oils and Water. Temperature range+20°C to +50°C Material Acetalcopolymerisate (POM)
Shipping Costs...
|
(per 5)
|
Add
Min.(Qty)
5
|
Straight Reducing - 12x10mm Suitable for Brake Fluid, Diesel Fuel & Oil, Heating Oil, Hydraulic Fluid, Coolants, Engine Oils and Water. Temperature range+20°C to +50°C Material Acetalcopolymerisate (POM)
Shipping Costs...
|
(per 5)
|
Add
Min.(Qty)
5
|
Contains:- Straight Connectors: S.112482, S.112483, S.112484 x 10 each. S.112485 x 6, S.112486, S.112487 x 4 each 90° Connectors: S.112497, S.112498, S.112499 x 5 each, S.112500, S.112501, S.112502 x 3 each T Connectors: S.112504, S.112505, S.112506 x 5 each, S.112507, S.112508, S.112509 x 3 each
Shipping Costs...
|
|
Add
|
Contains:- Straight Connectors: S.112481 x 10 Straight Reducing Connectors: S.112488, S.112489, S.112490, S.112491, S.112492, S.112493, S.112494, S.112495 x 3 each 90° Connectors: S.112496 x 5 T Connectors: S.112503 x 5 T Reducing Connectors: S.112510, S.112511, S.112512, S.112513 x 3 each 90° Y Connectors: S.112515, S.112517, S.112518 x 3 each
Shipping Costs...
|
|
Add
|
Constructed of high density polyethlene for extra strength. Supplied without Filter
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Plastic
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
|