We have the largest range of Tractor Parts, Accessories and Wearing Parts Online in the UK!
Type in what you are looking for and hit ENTER

Suggestions

              • Home
              • Find Tractor Parts by Make/Model

              Find Case IH MAXXUM 100 - X-LINE Parts by Category…

               (View all Case IH MAXXUM 100 - X-LINE tractor parts)
              Listed below are all the tractor replacement parts categories which have parts that are compatible with your application.

              Search by Case IH Make/Model

              Looking for Case IH MAXXUM 100 - X-LINE Parts? 

              (select another make)
              e.g. "Water Pump" or simply leave blank to see all parts for selected Make/Model
              Search

              Case IH MAXXUM 100 - X-LINE Parts Categories

              Case IH MAXXUM 100 - X-LINE Parts Categories

              Axles & Power Train...

              Track Rod, Length: 106mm 2WD Track Rods & Drag Links Clutch Pressure Plate Clutch Components & Tools Hydraulic Cylinder Gasket Hydraulic Gaskets Steering Arm, LH Steering Arms for 2WD Axle Spindles
              Tab Washer 2WD Wheel Hubs & Components Draft Control Pin Draft Hydraulic Control Components Hydraulic Piston Teflon Ring Hydraulic Ram Pistons Differential Shaft Tractor Rear Axle Shafts
              Nut M75x2.0 4WD Axle Hubs & Components Poly V / Multi-Rib Belt - PK Section - Belt No. 8PK1550 Drive Belts Lever Levers & Selectors Cone Wheel Nut, 5/8'' UNF Tractor Wheel Nuts
              Spacer 4WD Drive Shaft Bushings Axle Shaft Drive Shafts Thrust Washer Rear Differential Parts Splined Coupling Transfer Box Components
              Coupling 14T 4WD Drive Train Couplings Planetary Gear Final Drives (4WD) Seal Repair Kits & Seals Clutch Pressure Plate Transmission Gears
              King Pin 4WD King Pins for Axle Hubs Internal Circlip, 222mm (DIN | Standard No. DIN 472) Front Axle & Transmission Parts (4WD) Metric Rotary Shaft Seal, 55 x 70 x 10mm Rotary Shaft Seals Washer Transmission Thrust Washers
              Track Rod, Length: 106mm 4WD Track Rods & Drag Links Driven Gear Gears Oil Seal, 82.5 x 90 x 3.2mm Seals & Sealing Rings for Tractor Transmissions Hub Cap Wheel Hub Caps
              Spindle Bush Axle Spindle Bushings (2WD) Hydraulic Control Valve Hydraulic Control Valves & Components Metric Rotary Shaft Seal, 55 x 70 x 10mm Seals for 4WD Axle Hubs Yoke Coupling Yokes for 4WD Drive Shafts
              Brake Piston Seal. Brake Seals Spring Hydraulic Cylinders & Rams

              Bearings...

              Sparex Taper Roller Bearing (32015) Taper Roller Bearings

              Cabin & Body Panels...

              Evaporator Air-Con Evaporators Hydraulic Cable - Length: 1811mm, Outer cable length: 1526mm. Hydraulic Control Cables Thumb Wheel Telescopic Mirror Arms for Tractors 550mm Wiper Blade | for Case/IH, Fiat, Massey Ferguson, Ford NH, Landini Tractor Wiper Blades
              Thermostatic Switch Air-Con Switches PTO Cable - Length: 970mm, Outer cable length: 816mm. PTO Cables Cab Mount Tractor Cab Mount Bushes Windscreen Washer Pump Windscreen Washers
              Gas Strut, Total length: 685mm Cabin Gas Struts Mirror Head | Case/IH, Fiat, Ford NH, McCormick 7133.000.A 297017A1 82008016 Replacement Tractor Mirrors

              Engine & Filters...

              Banjo Bolt M14 Banjo Bolts Metric Rotary Shaft Seal, 55 x 70 x 10mm Engine Oil Seals O Ring 3/16'' x 2'' (BS329) 70 Shore O Rings Seal Kit (Steering Cylinder - 2WD) Seal Repair Kits
              Drain Tap Cooling System Drain Taps Fuel Filter - In Line Fuel Filters O Ring 3/16'' x 2'' (BS329) 70 Shore O Rings - Imperial O Rings & Accessories Poly V / Multi-Rib Belt - PK Section - Belt No. 8PK1550 Tractor Drive Belts
              Conrod Bearing +0.010'' (0.25mm) Engine Connecting Rod Bearings Fuel Injection Pump Gasket Gaskets for Fuel Pumps Oil Seal, 45.4 x 68.4 x 5.98mm Oil Seals - Imperial Oil Seals Radiator Cap Tractor Radiator Caps
              Rear Engine Oil Seal Engine Crankshaft Seals Hydraulic Filter - Spin On Hydraulic & Transmission Oil Filters Metric Rotary Shaft Seal, 55 x 70 x 10mm Oil Seals - Rotary Shaft Oil Seals

              Lighting & Electrical Accessories...

              Beacon Bracket (RH & LH) Beacon Brackets, Posts & Connectors LED Work Light, Interference: Class 5, 4200 Lumens Raw, 10-30V Hand Rail Starter Motor - 12V, 4.2Kw, Gear Reducted (Mahle) Starter Motors Work Light (Halogen), Rectangular, RH & LH, 12V Tractor Fit Lighting - Halogen
              LED Work Light, Interference: Class 5, 4200 Lumens Raw, 10-30V Cab Roof - Front Steering Column Combination Switch Light Switches 4 Pin Auxiliary Female Socket (Black Plastic) Towing Plugs & Sockets Beacon (Halogen), Flexible Pin, 12V Warning Beacons
              LED Work Light, Interference: Class 3, 2800 Lumens Raw, 10-30V Cab Roof - Rear LED Work Light, Interference: Class 5, 4200 Lumens Raw, 10-30V Rear Fender Brake Light Switch Tractor Brake Switches Work Light (Halogen), Rectangular, RH & LH, 12V Work Lights
              Front Combination Light (Halogen), 12V, RH, Straight Front Lights Engine Speed Sensor Senders & Sensors

              PTO & Linkage...

              Top Link Heavy Duty (Cat.28mm/3) Knuckle and Q.R. Hook, M36x3, Min. Length: 615mm. Complete Manual Top Link Assemblies Lower link plate 45x80mm Hole Ø 26.5mm Levelling Boxes Replacement Components Top link pin 19x92mm Cat. 1 Linkage Top Link Pins Levelling Box Assembly - Fork Hole Ø 26mm- Fork Hole Ø 26x61mm - Min. Length:790mm - M32x3 Metric PTO Levelling Box Conversion Kits & Assemblies
              Hydraulic Levelling Box (Supplied with: Hoses) - Fork Hole Ø 26mm - Fork Hole Ø 26x61mm - Min. Length: 620mm, Cylinder Bore: 90mm. Hydraulic Levelling Boxes Hydraulic Cross Shaft Ring Linkage Lift Arms Components Lower link pin 25x Cat. Lower Link Pins for PTO Linkage Round Linch Pin, Pin Ø11mm x 50mm PTO Linch Pins
              Hydraulic Top Link (Cat.28mm/3) Knuckle and Q.R CBM Hook, Cylinder Bore: 90mm, Min. Length : 650mm. Hydraulic PTO Top Links

              Towing & Fasteners...

              Imperial Castle Nut, Size: 7/8'' UNF (DIN | Standard No. DIN 935) Tensile strength: 8.8 Assorted Nuts External Circlip, 30mm (DIN | Standard No. DIN 471) Internal & External Locking Circlips Round Linch Pin, Pin Ø11mm x 50mm Round Imperial Castle Nut, Size: 7/8'' UNF (DIN | Standard No. DIN 935) Tensile strength: 8.8 UNF

              Gallery: Tractor Parts and Accessories for Case IH MAXXUM 100 - X-LINE

              Gas Strut, Total length: 685mm Fuel Filter - In Line Hydraulic Filter - Spin On Drain Tap Radiator Cap Metric Rotary Shaft Seal, 55 x 70 x 10mm Seal Kit (Steering Cylinder - 2WD) Internal Circlip, 222mm (DIN | Standard No. DIN 472) Cone Wheel Nut, 5/8'' UNF Clutch Pressure Plate Clutch Pressure Plate Oil Seal, 82.5 x 90 x 3.2mm Lever Thrust Washer Differential Shaft Brake Piston Seal. Evaporator Thermostatic Switch Cab Mount Windscreen Washer Pump 550mm Wiper Blade | for Case/IH, Fiat, Massey Ferguson, Ford NH, Landini PTO Cable - Length: 970mm, Outer cable length: 816mm. Mirror Head | Case/IH, Fiat, Ford NH, McCormick 7133.000.A 297017A1 82008016 Draft Control Pin Hydraulic Cylinder Gasket Spring Imperial Castle Nut, Size: 7/8'' UNF (DIN | Standard No. DIN 935) Tensile strength: 8.8 Rear Engine Oil Seal Banjo Bolt M14 Fuel Injection Pump Gasket Tab Washer Track Rod, Length: 106mm Nut M75x2.0 Thumb Wheel Starter Motor - 12V, 4.2Kw, Gear Reducted (Mahle) 4 Pin Auxiliary Female Socket (Black Plastic) Hydraulic Control Valve External Circlip, 30mm (DIN | Standard No. DIN 471) Conrod Bearing +0.010'' (0.25mm) Hub Cap Steering Arm, LH Spindle Bush Axle Shaft Driven Gear Planetary Gear Coupling 14T Spacer Yoke Coupling King Pin Metric Rotary Shaft Seal, 55 x 70 x 10mm Beacon Bracket (RH & LH) Hydraulic Piston Teflon Ring Work Light (Halogen), Rectangular, RH & LH, 12V Levelling Box Assembly - Fork Hole Ø 26mm- Fork Hole Ø 26x61mm - Min. Length:790mm - M32x3 Metric Hydraulic Top Link (Cat.28mm/3) Knuckle and Q.R CBM Hook, Cylinder Bore: 90mm, Min. Length : 650mm. Round Linch Pin, Pin Ø11mm x 50mm Lower link pin 25x Cat. Top link pin 19x92mm Cat. 1 Lower link plate 45x80mm Hole Ø 26.5mm O Ring 3/16'' x 2'' (BS329) 70 Shore Hydraulic Levelling Box (Supplied with: Hoses) - Fork Hole Ø 26mm - Fork Hole Ø 26x61mm - Min. Length: 620mm, Cylinder Bore: 90mm. Poly V / Multi-Rib Belt - PK Section - Belt No. 8PK1550 Hydraulic Cross Shaft Ring Top Link Heavy Duty (Cat.28mm/3) Knuckle and Q.R. Hook, M36x3, Min. Length: 615mm. Front Combination Light (Halogen), 12V, RH, Straight Engine Speed Sensor Brake Light Switch Steering Column Combination Switch Track Rod, Length: 106mm Beacon (Halogen), Flexible Pin, 12V Poly V / Multi-Rib Belt - PK Section - Belt No. 8PK1550 Metric Rotary Shaft Seal, 55 x 70 x 10mm Sparex Taper Roller Bearing (32015) Washer Splined Coupling Seal Work Light (Halogen), Rectangular, RH & LH, 12V Round Linch Pin, Pin Ø11mm x 50mm Imperial Castle Nut, Size: 7/8'' UNF (DIN | Standard No. DIN 935) Tensile strength: 8.8 LED Work Light, Interference: Class 5, 4200 Lumens Raw, 10-30V LED Work Light, Interference: Class 3, 2800 Lumens Raw, 10-30V LED Work Light, Interference: Class 5, 4200 Lumens Raw, 10-30V LED Work Light, Interference: Class 5, 4200 Lumens Raw, 10-30V Hydraulic Cable - Length: 1811mm, Outer cable length: 1526mm. O Ring 3/16'' x 2'' (BS329) 70 Shore Metric Rotary Shaft Seal, 55 x 70 x 10mm Oil Seal, 45.4 x 68.4 x 5.98mm

              Case IH

              Case IH 3594 tractor

              Case/IH can track their roots back to 1842 when they started out as manufacturers of steam tractor engines under the name of Case. In 1985 a merger with International Harvester created the brand Case/IH where the two product lines were joined with the large IH tractors being dropped in favour of the Case models. In 1999 Case IH was acquired by New Holland to form CNH Global group, where they continue to manufacture tractors under the Case IH brand.

              Quick Links.

              Product Highlights

              Account Information

              Legal Information

              Tractor parts described as suitable for original manufacturers on this site are Sparex branded tractor replacement parts and are not manufactured by the Original Equipment Manufacturer (OEM). Original Manufacturer’s names, part numbers and descriptions are quoted for reference purposes only and are not intended to indicate or suggest that our replacement parts are made by the OEM.
              Copyright 2020 Malpas Tractors Ltd, Curvica Ltd.
              Malpas Tractors Ltd is a company registered in England & Wales with number 2057260