We have the largest range of Tractor Parts, Accessories and Wearing Parts Online in the UK!
Type in what you are looking for and hit ENTER

Suggestions

              Find John Deere 6130M Parts by Category…

               (View all John Deere 6130M tractor parts)
              Listed below are all the tractor replacement parts categories which have parts that are compatible with your application.

              Search by John Deere Make/Model

              Looking for John Deere 6130M Parts? 

              (select another make)
              e.g. "Water Pump" or simply leave blank to see all parts for selected Make/Model
              Search

              John Deere 6130M Parts Categories

              John Deere 6130M Parts Categories

              Axles & Power Train...

              Track Rod, Length: 218mm 2WD Track Rods & Drag Links NTN SNR Taper Roller Bearing (HM803146/HM803110) APL2025 Narrow Axle Pivot Pin Bush AS2060 Planetary Gear Final Drives (4WD)
              O Ring 2.67 x 39.2mm 65 Shore 4WD Axle Differentials & Components Internal Circlip, 75mm (DIN | Standard No. DIN 472) APL2035 Sparex Taper Roller Bearing (HM803146/HM803110) Bearings Transmission Housing Gasket Gaskets for Transmission Parts
              Sparex Taper Roller Bearing (005.72.3547) 4WD Axle Hub Bearings NTN SNR Deep Groove Ball Bearing (60092RS) APL2035 Narrow Brake Band, OD 321mm. Brake Bands External Circlip, DIN | Standard No. Gears for Rear Differentials
              Oil Seal 4WD Axle Hubs & Components Axle Pivot Pin Bush APL2045 Brake Disc. OD 347mm Brake Discs Orbital Steering Unit Orbital Steering Units
              Metric Rotary Shaft Seal, 56 x 80 x 14.5mm Double Lip 4WD Drive Shaft Seals NTN SNR Taper Roller Bearing (HM803146/HM803110) APL2045 Deutz Brake Piston Seal. Brake Seals Transmission Snap Ring P.T.O. Seals
              Axle Pivot Pin Bush 4WD King Pins for Axle Hubs Axle Pivot Pin Bush APL2060 Clutch Plate Clutch Plates Metric Rotary Shaft Seal, 60 x 90 x 14.5mm Double Lip Seals
              Steering Joint, Length: 240mm 4WD Steering Joints Internal Circlip, 75mm (DIN | Standard No. DIN 472) AS2025 Crown Wheel and Pinion Crown Wheels & Pinions for Rear Differentials Oil Seal Seals for 4WD Axle Hubs
              Track Rod, Length: 225mm 4WD Track Rods & Drag Links NTN SNR Deep Groove Ball Bearing (60092RS) AS2035 Narrow Poly V / Multi-Rib Belt - PK Section - Belt No. 8PK3205 Drive Belts Clutch Cable - Length: 1030mm, Outer cable length: 660mm. Tractor Clutch Cables
              Universal Joint 30.2 x 83.0mm 4WD Universal Joints NTN SNR Taper Roller Bearing (HM803146/HM803110) AS2045 Sparex Deep Groove Ball Bearing (6010) Drive Shaft Bearings Wheel Stud Grip Ø Tractor Wheel Studs
              Internal Circlip, 75mm (DIN | Standard No. DIN 472) APL2025

              Bearings...

              NTN SNR Deep Groove Ball Bearing (60092RS) Deep Groove Bearings NTN SNR Taper Roller Bearing (HM803146/HM803110) Taper Roller Bearings

              Cabin & Body Panels...

              Heater Control Valve Air Conditioning Expansion Valves Gas Strut,  Total length: 445mm Cabin Gas Struts Blower Motor Resistor Resistors Dust Filter Tractor Cabin Filters
              Seatbelt Bracket Cab Seat Belts Fender - LH Fenders Cab Mount Tractor Cab Mount Bushes Wiper Blade - 24'' (600mm) Tractor Wiper Blades
              Clutch Cable - Length: 1030mm, Outer cable length: 660mm. Cabin Clutch Cables Sparex Seat Assembly Forklift Seat Footplate Tractor Cab Steps Windscreen Washer Pump Windscreen Washers

              Engine & Filters...

              Air Dryer Air Filters Main Bearing STD Engine Bearing Thrust Washers Fuel Separator - Element - FS20076 Fuel Filters Liner Seal Piston Liner Seals
              Dust Filter Cab Air Filters Conrod Bearing Std. Pair Engine Connecting Rod Bearings Fuel Pump - Electric Fuel Pumps Fuel Bowl Sediment Filters
              Drain Tap Cooling System Drain Taps Oil Seal Engine Crankshaft Seals Hydraulic Filter - Spin On - HF35474 Hydraulic & Transmission Oil Filters Poly V / Multi-Rib Belt - PK Section - Belt No. 8PK2192 Tractor Drive Belts
              Belt Tensioner Drive Belt Tensioners Oil Filter - Spin On - LF16243 Engine Oil Filters Brake Sealing Ring. O Rings - Imperial O Rings & Accessories Valve Seat Valve Seats & Caps
              Balancer Drive Shaft Engine Balancer Components Engine Oil Cap Filler Caps Sump Gasket (4045) Oil Sump Gaskets Water Pump Assembly Water Pump Assemblies

              Lighting & Electrical Accessories...

              INA Alternator Pulley - Overrunning, Pulley Ø: 56mm Alternator Pulleys LED Head Light, Interference: Not Classified, RH & LH (LH Dip), 1200 - 1290 Lumens Raw, 10-30V Head Lights - LED Rear Combination Light, (Halogen), Function: 3 Function, RH & LH, 12V Rear Lights LED  Work Light (Cree High Power), Interference: Class 3, 7000 Lumens Raw, 10-60V Tractor Fit Lighting - LED
              LED Work Light, Interference: Class 3, 2250 Lumens Raw, 10-30V Beacon Pole ISOBUS Socket Active TQPL Black. ISOBUS Front suspension position sensor Senders & Sensors LED Rotating Beacon (Amber), Interference: Class 3, Flexible Pin, 12-24V Warning Beacons
              Alternator (Mahle) - 14V, 200 Amps Complete Alternator Units Push Button Switch Light Switches Starter Motor  - 12V, 3.1Kw, Gear Reducted (Sparex) Starter Motors Work Light (Halogen), Rectangular, RH & LH, 12V Work Lights
              LED Head Light, Interference: Not Classified, RH & LH (LH Dip), 1200 - 1290 Lumens Raw, 10-30V Hand Rail Head Light Mount Lighting Cowls & Mounts

              PTO & Linkage...

              Automatic Bar Hole Stabiliser -  Ball Ø20mm -  Fork 22mm -  Min. Length:415mm -  M30x3.5 Automatic PTO Stabilisers Top Link Heavy Duty (Cat.3/3) Ball and Q.R. Hook,  M36x4, Min. Length: 530mm. Complete Manual Top Link Assemblies Hydraulic Top Link (Cat.3/3) Knuckle and Q.R CBM Hook, Cylinder Bore: 90mm, Min. Length : 650mm. Hydraulic PTO Top Links Lower link pin 25x98mm Cat. 2 Lower Link Pins for PTO Linkage
              Stabiliser - Ball Ø19mm - Fork 24mm - Min. Length: 394mm - M30x3.5 Bar Hole Hydraulic Top Link Handle 150mm Handles & Brackets for Hydraulic Top Links Lower link pin 25x98mm Cat. 2 Levelling Boxes Replacement Components Lower link pin 18x57mm Cat. 18mm Pins
              Top Link Heavy Duty (Cat.3/3) Ball and Q.R. Hook,  M36x4, Min. Length: 530mm. Cat. 3/3 Ball - Hook Heavy Duty Complete Assemblies Top Links - Manual John Deere 20 5020 6010 6015 6020 6030 5020 Series Models Cross Shaft | L168344 Hydraulic Linkage Cross Shafts Top link pin 32x98mm Cat. 3 Linkage Top Link Pins Levelling Box Assembly -  Ball Ø 25.5mm- Fork Hole Ø 27x84mm -  Min. Length:835mm -  M33x3.5 Metric PTO Levelling Box Conversion Kits & Assemblies

              Towing & Fasteners...

              External Circlip, DIN | Standard No. Internal & External Locking Circlips

              Gallery: Tractor Parts and Accessories for John Deere 6130M

              Gas Strut,  Total length: 445mm Dust Filter Air Dryer Dust Filter Fuel Separator - Element - FS20076 Hydraulic Filter - Spin On - HF35474 Oil Filter - Spin On - LF16243 Drain Tap Balancer Drive Shaft Engine Oil Cap Wheel Stud Grip Ø Clutch Cable - Length: 1030mm, Outer cable length: 660mm. Transmission Housing Gasket Brake Band, OD 321mm. Brake Disc. OD 347mm Brake Piston Seal. Heater Control Valve Cab Mount Footplate Windscreen Washer Pump Wiper Blade - 24'' (600mm) Seatbelt Bracket Fender - LH Water Pump Assembly Valve Seat Oil Seal Sump Gasket (4045) Fuel Pump - Electric Track Rod, Length: 218mm Oil Seal O Ring 2.67 x 39.2mm 65 Shore Clutch Plate Transmission Snap Ring Crown Wheel and Pinion External Circlip, DIN | Standard No. Alternator (Mahle) - 14V, 200 Amps Starter Motor  - 12V, 3.1Kw, Gear Reducted (Sparex) External Circlip, DIN | Standard No. Liner Seal Conrod Bearing Std. Pair Main Bearing STD Planetary Gear Metric Rotary Shaft Seal, 56 x 80 x 14.5mm Double Lip Sparex Deep Groove Ball Bearing (6010) Universal Joint 30.2 x 83.0mm Axle Pivot Pin Bush Sparex Taper Roller Bearing (005.72.3547) Oil Seal Sparex Taper Roller Bearing (HM803146/HM803110) Metric Rotary Shaft Seal, 60 x 90 x 14.5mm Double Lip Head Light Mount INA Alternator Pulley - Overrunning, Pulley Ø: 56mm Work Light (Halogen), Rectangular, RH & LH, 12V Levelling Box Assembly -  Ball Ø 25.5mm- Fork Hole Ø 27x84mm -  Min. Length:835mm -  M33x3.5 Metric Hydraulic Top Link (Cat.3/3) Knuckle and Q.R CBM Hook, Cylinder Bore: 90mm, Min. Length : 650mm. Lower link pin 25x98mm Cat. 2 Top link pin 32x98mm Cat. 3 Lower link pin 25x98mm Cat. 2 Lower link pin 18x57mm Cat. 18mm Stabiliser - Ball Ø19mm - Fork 24mm - Min. Length: 394mm - M30x3.5 Automatic Bar Hole Stabiliser -  Ball Ø20mm -  Fork 22mm -  Min. Length:415mm -  M30x3.5 Rear Combination Light, (Halogen), Function: 3 Function, RH & LH, 12V Poly V / Multi-Rib Belt - PK Section - Belt No. 8PK2192 Belt Tensioner Clutch Cable - Length: 1030mm, Outer cable length: 660mm. Orbital Steering Unit Hydraulic Top Link Handle 150mm John Deere 20 5020 6010 6015 6020 6030 5020 Series Models Cross Shaft | L168344 Fuel Bowl Top Link Heavy Duty (Cat.3/3) Ball and Q.R. Hook,  M36x4, Min. Length: 530mm. Front suspension position sensor Push Button Switch Track Rod, Length: 225mm Steering Joint, Length: 240mm LED Rotating Beacon (Amber), Interference: Class 3, Flexible Pin, 12-24V Poly V / Multi-Rib Belt - PK Section - Belt No. 8PK3205 Blower Motor Resistor LED Head Light, Interference: Not Classified, RH & LH (LH Dip), 1200 - 1290 Lumens Raw, 10-30V NTN SNR Deep Groove Ball Bearing (60092RS) NTN SNR Taper Roller Bearing (HM803146/HM803110) Sparex Seat Assembly LED  Work Light (Cree High Power), Interference: Class 3, 7000 Lumens Raw, 10-60V ISOBUS Socket Active TQPL Black. LED Work Light, Interference: Class 3, 2250 Lumens Raw, 10-30V LED Head Light, Interference: Not Classified, RH & LH (LH Dip), 1200 - 1290 Lumens Raw, 10-30V Internal Circlip, 75mm (DIN | Standard No. DIN 472) NTN SNR Taper Roller Bearing (HM803146/HM803110) Internal Circlip, 75mm (DIN | Standard No. DIN 472) NTN SNR Deep Groove Ball Bearing (60092RS) Internal Circlip, 75mm (DIN | Standard No. DIN 472) NTN SNR Deep Groove Ball Bearing (60092RS) Axle Pivot Pin Bush NTN SNR Taper Roller Bearing (HM803146/HM803110) NTN SNR Taper Roller Bearing (HM803146/HM803110) Axle Pivot Pin Bush Axle Pivot Pin Bush Top Link Heavy Duty (Cat.3/3) Ball and Q.R. Hook,  M36x4, Min. Length: 530mm. Brake Sealing Ring.

              John Deere

              John Deere 830 Diesel tractor

              A blacksmith from Illinois called John Deere founded the company in 1837 when he started to build highly polished ploughs made from steel. The company progressed through the years and built their first tractor in 1918 after they acquired the Waterloo Gasoline Tractor Co. They had limited sales success until they produced the Model D in 1923 which remained in production for the following 30 years. Their 2-cylinder tractors became warmly known as ‘Johnny Poppers’ or ‘Poppin' Johnnie's’ because of their distinctive exhaust note. John Deere was predominately a US brand until they purchased the German Lanz factory in 1960 to enable them to gain a foothold in the European market making them a truly global tractor manufacturer.

              Tractor parts described as suitable for original manufacturers on this site are Sparex branded tractor replacement parts and are not manufactured by the Original Equipment Manufacturer (OEM). Original Manufacturer’s names, part numbers and descriptions are quoted for reference purposes only and are not intended to indicate or suggest that our replacement parts are made by the OEM.