BONDLOC Products

Bondloc B243 is a medium strength, oil tolerant threadlocker designed for direct application onto ''as received parts'' where an oily film exists or where contamination is a problem.
This product works on passive substrates like plated surfaces and stainless steel as well as active metals like brass and copper.
Suitable for use with Diesel and Petrol.
Colour: Blue
Viscosity: 2,500 - 3,000cps
Breakaway Strength on Steel: <special id="2430"/<>Greater Than 25Nm (IOS 10964)
Prevail Torque: 5Nm
Cure speed:Less than 15 mins @ 20°C
Full Cure Time: 24 hours
Min Max Temp: -55°C - +180°C

Bondloc B222 is a low strength threadlocker suitable for all threaded assemblies, particularly good for small fasteners and set screws.
Designed for easy disassembly with hand tools, helps minimise and reduces loosening through vibrating assemblies.
Ideal for low strength threadlocking on fragile alloys that could fracture during disassembly.
Colour: Purple
Viscosity: 900 - 1,500 cps
Breakaway Strength:Less than 6Nm (ISO 10964)
Prevail Torque: 4Nm
Cure Speed:Less than 15mins @ 20°C with activator
Full Cure Time: 12 hours @ 20°C
Min Max Temp: -55°C - +150°C

Bondloc B275 is high strength, high viscosity, thixotropic threadlocker that prevents loosening against vibration when used on various types of threads <special id="1643"/<>orM25.
It works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. Can be disassembled by heating to 300°C.
Contains a fluorescing additive to allow monitoring under UV light.
Colour: Green
Viscosity: 7,000cps
Gap Fill: 0.2mm
Breakaway Strength on Steel: Greater Than 25Nm (ISO 10964)
Fixture Speed: Less than 10 mins - 6 hours with activator
Full Cure Time: 24 hours
Min Max Temp: -55°C - +150°C

B542 is a fast curing medium strength anaerobic sealant designed for the locking and sealing of metal pipes and fittings and helps prevents loosening and leakage due to shock and vibration.
The product cures when confined in the absence of air between close-fitting metal surfaces.
B542 is resistant to hydraulic fluids, oils, fuel and coolants. Ideal for threads, hydraulic and pneumatic fittings.
Colour: Brown
Viscosity: 400 - 800cps
Breakaway Strength on Steel: Less than 15Nm (ISO 10964)
Prevail Torque: 9Nm
Max Thread Size: M36
Fixture Time: 10 - 20 mins
Full Cure Time: 24 hours
Min Max Temp: -55°C - +150°C

BONDLOC® Superglue (3gr).
General purpose glue for bonding most materials, such as wood, card, metal, rubber and plastic.
Gives very high strength.
Bonds on close fitting parts.
Flash Point: 85°C

BONDLOC® Display Stand for B2002 (S.128793) Aluminium Epoxy Putty complete with x24 50g sticks.
A hand kneadable, speciality epoxy putty that mixes in 1 minute for permanent repairs to aluminium surfaces. It comes in a handy rod form with the curing agent encapsulated in the contrasting colour base material. Its putty like consistency eliminates drips and runs, providing 'no mess' supplication with no tools required to use. The mixed epoxy turns from a silvery colour to alloy upon curing and will not yellow upon exposure to UV light. After final cure B2002 may be drilled, sawed, tapped filed, sanded and painted.
Applications: B2002 can be used to permanently patch dents, scratches, cuts, gouges and holes in items such as housings and all types of repairs to moulding and injection type shapes. It can be used to make emergency repairs to reforming, rebuilding and patching anything made out of aluminium such as HVAC parts, refrigeration units, air conditioning units, machine parts, aluminium-roofing and siding, flagpoles, shelving, platforms, walkways, campers, road vehicles, canopies, gutters, truck and trailer bodies, wheels, manifolds, stripped threads, marine hardware and castings.
Full Cure: 24 hrs
Sandable: 20 mins

Epoxy putty for general maintenance and repairs. For permanent repairs to aluminium surfaces.
Colour : Light Silver
Viscosity : Putty
Full Cure : 24 hrs
Sandable : 20 mins

Works faster and stops larger leaks than liquid radiator repairs or the non-metallic powdered radiator repairs.
Contains expensive copper particles plus hardening and sealing agents.
Triple action seeks out any leaks, then seals them with pure copper.

Bondloc B222 is a low strength threadlocker suitable for all threaded assemblies, particularly good for small fasteners and set screws.
Designed for easy disassembly with hand tools, helps minimise and reduces loosening through vibrating assemblies.
Ideal for low strength threadlocking on fragile alloys that could fracture during disassembly.
Colour: Purple
Viscosity: 900 - 1,500 cps
Breakaway Strength:Less than 6Nm (ISO 10964)
Prevail Torque: 4Nm
Cure Speed:Less than 15mins @ 20°C with activator
Full Cure Time: 12 hours @ 20°C
Min Max Temp: -55°C - +150°C

Bondloc B270 is a high strength threadlocker which prevents loosening against vibration when sealing of bolts, nuts and studs.
Colour: Green
Viscosity: 400 - 600cps
Breakaway Strength on Steel: Greater Than 33Nm (ISO 10964)
Prevail Torque: 39Nm
Cure speed: 10 mins
Full Cure Time: 12 hours
Min Max Temp: -55°C - +180°C

Designed for bonding rubbers, plastics and elastomeric materials. Ideal for O-rings and where a rapid fixture is required.
Colour : Clear
Base : Ethyl
Viscosity : 25 - 35cps
Shear Strength : 15 - 25Nmm2
Fixture Time (EPDM) : Less than 5 seconds

Bondloc B510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal parts.
B510 has high temperature and chemical resistance and provides an instant low pressure seal.
Typical applications include sealing rigid flange faces on transmissions and motor casings. Suitable for surface imperfections up to 0.25mm.
Colour: Pink
Viscosity: 40,000 - 140,000cps
Gap Fill: 0.25mm
Tensile Strength on Steel: <special id="2430"/<>Greater Than 5Nmm2 (ISO 4587)
Fixture Speed: 15 mins - 2 hours with activator
Full Cure Time: 12 hours
Min Max Temp: -55°C - +230°C

Bondloc B515 is a flexible, medium-strength gasketing anaerobic sealant that cures when confined in the absence of air between close-fitting metal parts.
B515 is medium strength Industrial gasketing product and provides an instant low pressure seal on machined and rigid metal parts.
Typical applications include pumps, thermostats, compressors, transmission housings and axle covers.
Colour: Purple
Viscosity: Paste
Gap Fill: 0.3mm
Tensile Strength on Steel : Less than 6Nmm2 (ISO 4587)
Fixture Time: Less than 35 mins
Full Cure Time: 12 hours
Min Max Temp: -55°C - +150°C

B542 is a fast curing medium strength anaerobic sealant designed for the locking and sealing of metal pipes and fittings and helps prevents loosening and leakage due to shock and vibration.
The product cures when confined in the absence of air between close-fitting metal surfaces.
B542 is resistant to hydraulic fluids, oils, fuel and coolants. Ideal for threads, hydraulic and pneumatic fittings.
Colour: Brown
Viscosity: 400 - 800cps
Breakaway Strength on Steel: Less than 15Nm (ISO 10964)
Prevail Torque: 9Nm
Max Thread Size: M36
Fixture Time: 10 - 20 mins
Full Cure Time: 24 hours
Min Max Temp: -55°C - +150°C

Bondloc B577 is a yellow, medium strength anaerobic sealant formulated with Teflon designed for the locking and sealing of metal pipes and fittings.
The product cures when confined in the absence of air between close-fitting metal surfaces. Fills the space between threaded parts and seals and locks at the same time.
B577 provides an instant low pressure seal, does shrink or creep and seals all types of threaded connections.
Excellent chemical or solvent resistance to ethanol, motor oil, unleaded petrol, acetone and brake fluid. Ideal for large fittings, sprinklers system, water and gas line fittings.
Colour: Yellow
Viscosity: 80,000 - 90,000cps
Breakaway Strength:Less than 11Nm (ISO 10964)
Full Cure Time: 6 - 12 hours
Fixture Time: Less than 10 mins with activator
Min Max Temp: -55°C - +180°C