LOCTITE°® 5926 is a multi-purpose flexible silicone sealant and cures on exposure to moisture in the air to form a tough rubber gasket. Ideal for use on flexible flanges, machined or cast surfaces, metal or plastic. This product resists ageing, weathering and thermal cycling without hardening, shrinking or cracking. Typical applications include valve covers, timing gear covers, differential covers, oil pans, transmission pans, water pumps, and thermostat housings. This product is typically used in applications with an operating temperature range of -54 °C to 204 °C. Multi-purpose flexible silicone sealant. Can be used on metal, plastic and painted parts Resists vibration, thermal expansion and contraction Operating temperature range of -54 °C to +150 °C.
In stock (for UK delivery only)
Shipping Costs...
|
|
Add
|
LOCTITE°® SF 7235 is a solvent formulation aerosol spray designed to remove dirt, oil, grease, brake fluid, and brake dust deposits from brake callipers, drums, disks, cylinders, pads, linings, shoes and surrounding components. Its superior wetting action makes it suitable for brake and clutch systems still equipped with asbestos components. Not recommended for cleaning plastic or rubber parts.metals.
In stock (for UK delivery only)
Shipping Costs...
|
|
Add
|
LOCTITE°® 574 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flange connections. The nature of LOCTITE°® 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance.
In stock (for UK delivery only)
Shipping Costs...
|
|
Add
|
LOCTITE°® 542 Thread Sealant (10ml). Designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The thixotropic nature of LOCTITE°® 542 reduces the migration of liquid product after application to the part.
In stock (for UK delivery only)
Shipping Costs...
|
|
Add
|
LOCTITE°® 2701 Threadlocker Green (50ml). A low viscosity, methacrylate-based threadlocking adhesive with high strength, especially for chromed surfaces. Steel fixture time of 10 min, brass 4 min and stainless steel 25 min. Tolerates slight contamination's of industrial oils. Suitable for all metal fasteners. Fluoresces under UV light. Cures at room temp. Resists vibration. Max Thread Size: M20. Service Range: -50°C - +150°C. Breakaway Torque: 38Nm
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
LOCTITE°® 2701 Threadlocker Green (250ml). A low viscosity, Methacrylate-based threadlocking adhesive with high strength, especially for chromed surfaces. Steel fixture time of 10 min, brass 4 min and stainless steel 25 min. Tolerates slight contamination's of industrial oils. Suitable for all metal fasteners. Fluoresces under UV light. Cures at room temp. Resists vibration. Max Thread Size: M20. Service Range: -50°C - +150°C. Breakaway Torque: 38Nm.
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
LOCTITE°® 290 Threadlock Green (10ml). A liquid medium/high-strength threadlocker designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need for disassembly prior to application. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The product can also fill porosities in welds, castings and powdered metal parts. Ideal for locking pre-assembled fasteners. Cures in the absence of air. Cures at room temperature. Resists vibration. Max Thread Size: M6. Service Temp Range: -50°C - +150°C. Breakaway Torque: 10Nm
In stock (for UK delivery only)
Shipping Costs...
|
|
Add
|
LOCTITE°® 290 Threadlock Green (50ml). A liquid medium/high-strength threadlocker designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need for disassembly prior to application. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The product can also fill porosity in welds, castings and powdered metal parts. Ideal for locking pre-assembled fasteners. Cures in the absence of air. Cures at room temperature. Resists vibration. Max Thread Size: M6. Service Temp Range: -50°C - +150°C. Breakaway Torque: 10Nm
In stock (for UK delivery only)
Shipping Costs...
|
|
Add
|
LOCTITE°® 290 Threadlock Green (250ml). A liquid medium/high-strength threadlocker designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need for disassembly prior to application. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The product can also fill porosity in welds, castings and powdered metal parts. Ideal for locking pre-assembled fasteners. Cures in the absence of air. Cures at room temperature. Resists vibration. Max Thread Size: M6. Service Temp Range: -50°C - +150°C. Breakaway Torque: 10Nm
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
LOCTITE°® Screwlock 222 (250ml). Low strength general purpose for threadlocking of adjusting screws. Cures in the absence of air. Cures at room temp. Resists vibration. Max Thread Size: M36. Service Range: -50°C - +150°C. Breakaway Torque: 6Nm.
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
For straight/straight and straight/taper threads and fittings. Fills the space between threaded parts and seals and locks at the same time. LOCTITE°® 577 is designed for the locking and sealing of metal pipes and fittings as well as other threaded assemblies. The product provides an instant, low-pressure seal for metal pipes and fittings. It will not creep, shrink or shred. It has excellent chemical and thermal resistance and offers less migration of liquid product after application. NEW: Henkel has recently improved the product formulation of LOCTITE 577 providing: Higher strength on contaminated surfaces Improved thermal performance High performance on passive metals without an activator
•Medium-strength, general purpose thread sealant for sealing metal threads
•Suitable for all metals
•Instant low pressure seal
•Excellent chemical resistance
•Locks connection against vibration-induced loosening and other stresses
•Easy to apply
•Cures on active and inactive metals
•NSF P1 Reg. No. 123001
•DVGW Approval (EN 751-1): DVGW Reg. No. NG-5146CQ0312
In stock (for UK delivery only)
Shipping Costs...
|
|
Add
|
LOCTITE°® 5331 Threadseal (250ml). Medium Strength, silicone based. Ideal for plastic threads, plastic to metal & metal to metal. Seal resists vibration & shock loads. Max Thread Size: M80/ R3". Service Range: -50°C - +150°C. Breakaway Torque 1.5Nm.
In stock (for UK delivery only)
Shipping Costs...
|
|
Add
|
LOCTITE°® 5208 Flexible Gasket, Red (250ml). Medium strength. Single component easy & clean to apply. High resistance to solvents. Resists high pressure when cures. Service Range: -50°C - +150°C. Tensile Sheer Strength: 6 N/mm°². Max Gap: 0.1mm.
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
LOCTITE°® 5205 Flexible Gasket Fast Cure, Red (300ml). Medium strength. High resistance to solvents. Resists high pressure when fully cures. Service Range: -50°C - +150°C. Tensile Sheer Strength: 3 N/mm°². Max Gap: 0.125mm
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
LOCTITE°® 641 Bearing Fit (50ml). Designed for the bonding of cylindrical fitting parts, particularly where disassembly is required for servicing operations. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings.
In stock (for UK delivery only)
Shipping Costs...
|
|
Add
|
LOCTITE°® 638 Retainer, Green (250ml). High strength, general purpose retainer. 100% contact load. Best resistance to dynamic, axial & radial loads. Service Range: -55°C - + 150°C. Tensile sheer strength: >25. Max diametrical clearance: 0.25mm
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
LOCTITE°® 603 Retainer, Green (250ml). High strength, oil tolerant. Ideal for retaining close fitting cylindrical parts where degreasing is not possible. Approved for use on bearings. Service Range: -55°C - + 150°C. Tensile sheer strength: >22.5
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
LOCTITE°® 648 Retainer, Green (250ml). High strength retainer. Ideal for retaining of parts with a clearance or interference fit, i.e. retaining bushes, bearings, seals, fans, and liners. Increased temperature resistance. WRC Approval (BS 6920): 0808532.
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
LOCTITE°® 7471 Activator (150ml). Activator for threadlocking pipe, threadsealing gaskets, retaining & Anaerobic acrylics. Increases cure speed on passive & inactive surfaces. Recommended for use on passive metals, plated or passive surfaces.
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
LOCTITE°® 7455 Activator (25ml). General purpose. Increases cure speed on passive & inactive surfaces. Provides excellent aesthetic appearance of bond line. Suitable for stress cracking sensitive plastics. Fast fixing between close fitting parts.
In stock (for UK delivery only)
Shipping Costs...
|
|
Add
|
LOCTITE°® 7455 Activator (150ml). General purpose. Increases cure speed on passive & inactive surfaces. Provides excellent aesthetic appearance of bond line. Suitable for stress cracking sensitive plastics. Fast fixing between close fitting parts.
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
Loctite Anti-Seize B8008 (454g). Copper based anti-sieze brush top can. Provides protection in harsh environments & operating conditions. Prevent fretting & galvanic corrosion. Solid lubricating agent: Copper & Graphite. Service Range: -30 - 980°C
In stock (for UK delivery only)
Shipping Costs...
|
|
Add
|
Loctite Anti-Seize B8151 (400g). Aluminium based anti-seize. Provides protection in harsh environments & operating conditions. Protects threaded connections. Prevents seizing. Service Range: -30 - 900°C
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
Loctite Teroson General puropse soft elastic sealing. Paty, thixotropic. UV & weathering resistant sealant. Skin Formation Time: 25-40mins. Depth of cure after 24h: 4mm. Service Range: -50°C - +80°C
In stock (for UK delivery only)
Shipping Costs...
|
|
Add
|
LOCTITE°® MS 930 Teroson adhesive (310ml). General purpose soft elastic sealing. Paty, thixotropic. UV & weathering resistant sealant. Skin Formation Time: 25-40mins. Depth of cure after 24h: 4mm. Service Range: -50°C - +80°C
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
LOCTITE°® MS 939 Teroson adhesive, white (290ml). General purpose versatile elastic bonding adhesive. High strength. Good elasticity. Self-levelling. Meets damp heat test for solar industry. Skin formation time: 10mins. Service Range: -40°C - +100°C.
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
LOCTITE°® MS 939 Teroson adhesive (290ml). General purpose versatile elastic bonding adhesive. High strength. Good elasticity. Self-levelling. Meets damp heat test for solar industry. Skin formation time: 10mins. Service Range: -40°C - +100°C
In stock (for UK delivery only)
Shipping Costs...
|
|
Add
|
LOCTITE°® 5366 Acetoxy Clear Silicone (310ml). General purpose 1 component compound. 1K Acetoxy silicone. Skin formation time: 5mins. Elongation at break: 530%. Hardness shore A: 25. Shear strength (GBMS): 2.5N/mm°². Service Temp (Up to): 250°C.
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
LOCTITE°® 598 High Performance Black Silicone (300ml). Permanently flexible adhesive sealant for bonding & sealing. For use on parts subjected to constant vibration & thermal expansion & contraction. Low odour. Service Range: -60 - 260°C.
In stock (for UK delivery only)
Shipping Costs...
|
|
Add
|
LOCTITE°® 5900 High Performance Black Silicone Gasket (300ml). Silicone gasket Thixotropic paste. Excellent in engine oils. Low strength. Skin over time: 15 mins. Tensile Shear Strength: 1.2 N/mm°². Max Gap: 1mm. Service Range: -55°C - +200°C.
In stock (for UK delivery only)
Shipping Costs...
|
|
Add
|
|