Each base has a Product Identification Code (PIC) for material traceability, the name CROSBY or CG, and a size forged into it.
Based on the catalogue breaking strength of wire rope, Crosby wire rope clips have an efficiency rating of 80% for 3mm through 22mm sizes, and 90% for sizes 24mm through 90mm.
Entire Clip is galvanized to resist corrosive and rusting action.
Sizes 3mm through 62mm and 75mm have forged bases.
All Clips are individually bagged or tagged with proper application instructions and warning information.
Clip sizes up through 38mm have rolled threads.
Meets or exceeds all requirements of ASME B30.26 including identification, ductilit , design factor, proof load and temperature requirements. Importantly, these wire rope clips meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
Look for the Red-U-Bolt®, your assurance of Genuine Crosby Clips.
In stock (for delivery only)
 Shipping Costs...
|
|
Add
|
Each base has a Product Identification Code (PIC) for material traceability, the name CROSBY or CG, and a size forged into it.
Based on the catalogue breaking strength of wire rope, Crosby wire rope clips have an efficiency rating of 80% for 3mm through 22mm sizes, and 90% for sizes 24mm through 90mm.
Entire Clip is galvanized to resist corrosive and rusting action.
Sizes 3mm through 62mm and 75mm have forged bases.
All Clips are individually bagged or tagged with proper application instructions and warning information.
Clip sizes up through 38mm have rolled threads.
Meets or exceeds all requirements of ASME B30.26 including identification, ductilit , design factor, proof load and temperature requirements. Importantly, these wire rope clips meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
Look for the Red-U-Bolt®, your assurance of Genuine Crosby Clips.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Each base has a Product Identification Code (PIC) for material traceability, the name CROSBY or CG, and a size forged into it.
Based on the catalogue breaking strength of wire rope, Crosby wire rope clips have an efficiency rating of 80% for 3mm through 22mm sizes, and 90% for sizes 24mm through 90mm.
Entire Clip is galvanized to resist corrosive and rusting action.
Sizes 3mm through 62mm and 75mm have forged bases.
All Clips are individually bagged or tagged with proper application instructions and warning information.
Clip sizes up through 38mm have rolled threads.
Meets or exceeds all requirements of ASME B30.26 including identification, ductilit , design factor, proof load and temperature requirements. Importantly, these wire rope clips meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
Look for the Red-U-Bolt®, your assurance of Genuine Crosby Clips.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Each base has a Product Identification Code (PIC) for material traceability, the name CROSBY or CG, and a size forged into it.
Based on the catalogue breaking strength of wire rope, Crosby wire rope clips have an efficiency rating of 80% for 3mm through 22mm sizes, and 90% for sizes 24mm through 90mm.
Entire Clip is galvanized to resist corrosive and rusting action.
Sizes 3mm through 62mm and 75mm have forged bases.
All Clips are individually bagged or tagged with proper application instructions and warning information.
Clip sizes up through 38mm have rolled threads.
Meets or exceeds all requirements of ASME B30.26 including identification, ductilit , design factor, proof load and temperature requirements. Importantly, these wire rope clips meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
Look for the Red-U-Bolt®, your assurance of Genuine Crosby Clips.
In stock (for delivery only)
Offer Expires:
31/12/2024
Shipping Costs...
|
List: £34.70
You Pay: £18.53
Inc VAT
|
Add
|
Each base has a Product Identification Code (PIC) for material traceability, the name CROSBY or CG, and a size forged into it.
Based on the catalogue breaking strength of wire rope, Crosby wire rope clips have an efficiency rating of 80% for 3mm through 22mm sizes, and 90% for sizes 24mm through 90mm.
Entire Clip is galvanized to resist corrosive and rusting action.
Sizes 3mm through 62mm and 75mm have forged bases.
All Clips are individually bagged or tagged with proper application instructions and warning information.
Clip sizes up through 38mm have rolled threads.
Meets or exceeds all requirements of ASME B30.26 including identification, ductilit , design factor, proof load and temperature requirements. Importantly, these wire rope clips meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
Look for the Red-U-Bolt®, your assurance of Genuine Crosby Clips.
In stock (for delivery only)
Offer Expires:
31/12/2024
Shipping Costs...
|
List: £34.51
You Pay: £27.97
Inc VAT
|
Add
|
Hot Dip galvanized steel
The standard choice for light duty applications and loading conditions.
Meets the performance requirements of EN13411-1:2002.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Hot Dip galvanized steel
The standard choice for light duty applications and loading conditions.
Meets the performance requirements of EN13411-1:2002.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Hot Dip galvanized steel
The standard choice for light duty applications and loading conditions.
Meets the performance requirements of EN13411-1:2002.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Hot Dip galvanized steel
The standard choice for light duty applications and loading conditions.
Meets the performance requirements of EN13411-1:2002.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Hot Dip galvanized steel
The standard choice for light duty applications and loading conditions.
Meets the performance requirements of EN13411-1:2002.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Capacities 1/3 to 55 metric tons, grade 6
Forged - Quenched and Tempered, with alloy pins
Working Load Limit and grade '6' permanently shown on every shackle
Hot Dip galvanized or self coloured
Sizes 3/8 inch and below are mechanically galvanized
Fatigue rated
Shackles 25t and larger are RFID EQUIPPED
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
Approved for use at -40° C (-40° F) to 204° C (400° F).
All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
Meets or exceeds all requirements of ASME B30.26
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
Look for the Red Pin® . . . the mark of genuine Crosby quality.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Capacities 1/3 to 55 metric tons, grade 6
Forged - Quenched and Tempered, with alloy pins
Working Load Limit and grade '6' permanently shown on every shackle
Hot Dip galvanized or self coloured
Sizes 3/8 inch and below are mechanically galvanized
Fatigue rated
Shackles 25t and larger are RFID EQUIPPED
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
Approved for use at -40° C (-40° F) to 204° C (400° F).
All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
Meets or exceeds all requirements of ASME B30.26
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
Look for the Red Pin® . . . the mark of genuine Crosby quality.
In stock (for delivery only)
Offer Expires:
31/12/2024
Shipping Costs...
|
List: £41.06
You Pay: £20.83
Inc VAT
|
Add
|
Capacities 1/3 to 55 metric tons, grade 6
Forged - Quenched and Tempered, with alloy pins
Working Load Limit and grade '6' permanently shown on every shackle
Hot Dip galvanized or self coloured
Sizes 3/8 inch and below are mechanically galvanized
Fatigue rated
Shackles 25t and larger are RFID EQUIPPED
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
Approved for use at -40° C (-40° F) to 204° C (400° F).
All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
Meets or exceeds all requirements of ASME B30.26
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
Look for the Red Pin® . . . the mark of genuine Crosby quality.
In stock (for delivery only)
Offer Expires:
31/12/2024
Shipping Costs...
|
List: £40.64
You Pay: £19.69
Inc VAT
|
Add
|
Capacities 1/3 to 55 metric tons, grade 6
Forged - Quenched and Tempered, with alloy pins
Working Load Limit and grade '6' permanently shown on every shackle
Hot Dip galvanized or self coloured
Sizes 3/8 inch and below are mechanically galvanized
Fatigue rated
Shackles 25t and larger are RFID EQUIPPED
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
Approved for use at -40° C (-40° F) to 204° C (400° F).
All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
Meets or exceeds all requirements of ASME B30.26
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
Look for the Red Pin® . . . the mark of genuine Crosby quality.
In stock (for delivery only)
Offer Expires:
31/12/2024
Shipping Costs...
|
List: £46.72
You Pay: £22.67
Inc VAT
|
Add
|
Capacities 1/3 to 55 metric tons, grade 6
Forged - Quenched and Tempered, with alloy pins
Working Load Limit and grade '6' permanently shown on every shackle
Hot Dip galvanized or self coloured
Sizes 3/8 inch and below are mechanically galvanized
Fatigue rated
Shackles 25t and larger are RFID EQUIPPED
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
Approved for use at -40° C (-40° F) to 204° C (400° F).
All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
Meets or exceeds all requirements of ASME B30.26
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
Look for the Red Pin® . . . the mark of genuine Crosby quality.
In stock (for delivery only)
Offer Expires:
31/12/2024
Shipping Costs...
|
List: £51.95
You Pay: £26.08
Inc VAT
|
Add
|
Capacities 1/3 to 55 metric tons, grade 6
Forged - Quenched and Tempered, with alloy pins
Working Load Limit and grade '6' permanently shown on every shackle
Hot Dip galvanized or self coloured
Sizes 3/8 inch and below are mechanically galvanized
Fatigue rated
Shackles 25t and larger are RFID EQUIPPED
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
Approved for use at -40° C (-40° F) to 204° C (400° F).
All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
Meets or exceeds all requirements of ASME B30.26
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
Look for the Red Pin® . . . the mark of genuine Crosby quality.
In stock (for delivery only)
Offer Expires:
31/12/2024
Shipping Costs...
|
List: £65.72
You Pay: £33.08
Inc VAT
|
Add
|
Capacities 1/3 to 55 metric tons, grade 6
Forged - Quenched and Tempered, with alloy pins
Working Load Limit and grade '6' permanently shown on every shackle
Hot Dip galvanized or self coloured
Sizes 3/8 inch and below are mechanically galvanized
Fatigue rated
Shackles 25t and larger are RFID EQUIPPED
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
Approved for use at -40° C (-40° F) to 204° C (400° F).
All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
Meets or exceeds all requirements of ASME B30.26
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
Look for the Red Pin® . . . the mark of genuine Crosby quality.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Capacities 1/3 to 55 metric tons, grade 6
Forged - Quenched and Tempered, with alloy pins
Working Load Limit and grade '6' permanently shown on every shackle
Hot Dip galvanized or self coloured
Sizes 3/8 inch and below are mechanically galvanized
Fatigue rated
Shackles 25t and larger are RFID EQUIPPED
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
Approved for use at -40° C (-40° F) to 204° C (400° F).
All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
Meets or exceeds all requirements of ASME B30.26
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
Look for the Red Pin® . . . the mark of genuine Crosby quality.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Capacities 1/3 to 55 metric tons, grade 6
Forged - Quenched and Tempered, with alloy pins
Working Load Limit and grade '6' permanently shown on every shackle
Hot Dip galvanized or self coloured
Sizes 3/8 inch and below are mechanically galvanized
Fatigue rated
Shackles 25t and larger are RFID EQUIPPED
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
Approved for use at -40° C (-40° F) to 204° C (400° F).
All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
Meets or exceeds all requirements of ASME B30.26
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
Look for the Red Pin® . . . the mark of genuine Crosby quality.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Capacities 1/3 to 55 metric tons, grade 6
Forged - Quenched and Tempered, with alloy pins
Working Load Limit and grade '6' permanently shown on every shackle
Hot Dip galvanized or self coloured
Sizes 3/8 inch and below are mechanically galvanized
Fatigue rated
Shackles 25t and larger are RFID EQUIPPED
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
Approved for use at -40° C (-40° F) to 204° C (400° F).
All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
Meets or exceeds all requirements of ASME B30.26
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
Look for the Red Pin® . . . the mark of genuine Crosby quality.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Capacities 1/3 to 55 metric tons, grade 6
Forged - Quenched and Tempered, with alloy pins
Working Load Limit and grade '6' permanently shown on every shackle
Hot Dip galvanized or self coloured
Sizes 3/8 inch and below are mechanically galvanized
Fatigue rated
Shackles 25t and larger are RFID EQUIPPED
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
Approved for use at -40° C (-40° F) to 204° C (400° F).
All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
Meets or exceeds all requirements of ASME B30.26
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
Look for the Red Pin® . . . the mark of genuine Crosby quality.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Capacities 1/3 to 55 metric tons, grade 6
Forged - Quenched and Tempered, with alloy pins
Working Load Limit and grade '6' permanently shown on every shackle
Hot Dip galvanized or self coloured
Sizes 3/8 inch and below are mechanically galvanized
Fatigue rated
Shackles 25t and larger are RFID EQUIPPED
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
Approved for use at -40° C (-40° F) to 204° C (400° F).
All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
Meets or exceeds all requirements of ASME B30.26
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
Look for the Red Pin® . . . the mark of genuine Crosby quality.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Capacities 1/3 to 55 metric tons, grade 6
Forged - Quenched and Tempered, with alloy pins
Working Load Limit and grade '6' permanently shown on every shackle
Hot Dip galvanized or self coloured
Sizes 3/8 inch and below are mechanically galvanized
Fatigue rated
Shackles 25t and larger are RFID EQUIPPED
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
Approved for use at -40° C (-40° F) to 204° C (400° F).
All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
Meets or exceeds all requirements of ASME B30.26
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
Look for the Red Pin® . . . the mark of genuine Crosby quality.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Capacities 1/3 to 55 metric tons, grade 6
Forged - Quenched and Tempered, with alloy pins
Working Load Limit and grade '6' permanently shown on every shackle
Hot Dip galvanized or self coloured
Sizes 3/8 inch and below are mechanically galvanized
Fatigue rated
Shackles 25t and larger are RFID EQUIPPED
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
Approved for use at -40° C (-40° F) to 204° C (400° F).
All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
Meets or exceeds all requirements of ASME B30.26
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
Look for the Red Pin® . . . the mark of genuine Crosby quality.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Capacities 1/3 to 55 metric tons, grade 6
Forged - Quenched and Tempered, with alloy pins
Working Load Limit and grade '6' permanently shown on every shackle
Hot Dip galvanized or self coloured
Sizes 3/8'' and below are mechanically galvanized
Fatigue rated
Shackles 25t and larger are RFID EQUIPPED
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification.
Approved for use at -40° C (-40° F) to 204° C (400° F).
All 209 and 210 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg. at -20° C (-4° F) upon special request.
Meets or exceeds all requirements of ASME B30.26
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for Certification of Lifting Appliances available.
Look for the Red Pin® . . . the mark of genuine Crosby quality.
In stock (for delivery only)
Offer Expires:
31/12/2024
Shipping Costs...
|
List: £51.41
You Pay: £24.42
Inc VAT
|
Add
|
Capacities 1/3 to 55 metric tons, grade 6
Forged - Quenched and Tempered, with alloy pins
Working Load Limit and grade '6' permanently shown on every shackle
Hot Dip galvanized or self coloured
Sizes 3/8'' and below are mechanically galvanized
Fatigue rated
Shackles 25t and larger are RFID EQUIPPED
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification.
Approved for use at -40° C (-40° F) to 204° C (400° F).
All 209 and 210 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg. at -20° C (-4° F) upon special request.
Meets or exceeds all requirements of ASME B30.26
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for Certification of Lifting Appliances available.
Look for the Red Pin® . . . the mark of genuine Crosby quality.
In stock (for delivery only)
Offer Expires:
31/12/2024
Shipping Costs...
|
List: £31.62
You Pay: £24.35
Inc VAT
|
Add
|
Capacities 1/3 to 55 metric tons, grade 6
Forged - Quenched and Tempered, with alloy pins
Working Load Limit and grade '6' permanently shown on every shackle
Hot Dip galvanized or self coloured
Sizes 3/8'' and below are mechanically galvanized
Fatigue rated
Shackles 25t and larger are RFID EQUIPPED
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification.
Approved for use at -40° C (-40° F) to 204° C (400° F).
All 209 and 210 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg. at -20° C (-4° F) upon special request.
Meets or exceeds all requirements of ASME B30.26
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for Certification of Lifting Appliances available.
Look for the Red Pin® . . . the mark of genuine Crosby quality.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Capacities 1/3 to 55 metric tons, grade 6
Forged - Quenched and Tempered, with alloy pins
Working Load Limit and grade '6' permanently shown on every shackle
Hot Dip galvanized or self coloured
Sizes 3/8'' and below are mechanically galvanized
Fatigue rated
Shackles 25t and larger are RFID EQUIPPED
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification.
Approved for use at -40° C (-40° F) to 204° C (400° F).
All 209 and 210 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg. at -20° C (-4° F) upon special request.
Meets or exceeds all requirements of ASME B30.26
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for Certification of Lifting Appliances available.
Look for the Red Pin® . . . the mark of genuine Crosby quality.
In stock (for delivery only)
Offer Expires:
31/12/2024
Shipping Costs...
|
List: £54.52
You Pay: £26.17
Inc VAT
|
Add
|
Capacities 1/3 to 55 metric tons, grade 6
Forged - Quenched and Tempered, with alloy pins
Working Load Limit and grade '6' permanently shown on every shackle
Hot Dip galvanized or self coloured
Sizes 3/8'' and below are mechanically galvanized
Fatigue rated
Shackles 25t and larger are RFID EQUIPPED
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification.
Approved for use at -40° C (-40° F) to 204° C (400° F).
All 209 and 210 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg. at -20° C (-4° F) upon special request.
Meets or exceeds all requirements of ASME B30.26
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for Certification of Lifting Appliances available.
Look for the Red Pin® . . . the mark of genuine Crosby quality.
In stock (for delivery only)
Offer Expires:
31/12/2024
Shipping Costs...
|
List: £69.61
You Pay: £33.17
Inc VAT
|
Add
|
Capacities 1/3 to 55 metric tons, grade 6
Forged - Quenched and Tempered, with alloy pins
Working Load Limit and grade '6' permanently shown on every shackle
Hot Dip galvanized or self coloured
Sizes 3/8'' and below are mechanically galvanized
Fatigue rated
Shackles 25t and larger are RFID EQUIPPED
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification.
Approved for use at -40° C (-40° F) to 204° C (400° F).
All 209 and 210 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg. at -20° C (-4° F) upon special request.
Meets or exceeds all requirements of ASME B30.26
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for Certification of Lifting Appliances available.
Look for the Red Pin® . . . the mark of genuine Crosby quality.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
|
|