Promotions

Contains
Socket 1/2'' 10, 12, 13, 14, 17, 19, 21, 23, 24, 27, 30, 32mm,
Drive Size Deep Socket 1/2'' 10, 12, 13, 14, 17, 19mm,
Extension Bar 1/2'' 3'' (80mm), 5'' (130mm), 10'' (250mm),
Drive Size Ratchet Handle 1/2'',
Wrench Size 7, 8, 10, 12, 13, 14, 17, 19, 21, 22, 23, 24mm,
T Socket Wrench 8, 10, 12mm,
Key Wrench Size Hex 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm,
Go Through Screwdriver (SL) 6mm x 4''(SL) 8mm x 12''(PH) 2 x 6mm x 4'',
Screwdriver - Slotted (-) (SL) 3mm x 10'',
Hammer Ball Pein,
2 in 1 Two Way Stubby Screwdriver (PH) 2, (SL) 0.94 x 6.35,
Adjustable Wrench 12''

ECE Rating: Reg 10
CE Approved: Yes
IP Rating: IP69K
Connection Type: DT Connector

This Ultra Capacitor Jump Starter utilises the remaining voltage of your car battery to transfer charge into the Ultra Capacitor Jump Starter to generate power to then jump start the vehicle. Simply connect the Ultra Capacitor Jump Starter to your car battery, once connected the capacitor display screen will display your car battery voltage. The screen will then read °€˜Jump Start Ready°€™ if your flat battery is still above 5V. If unable to use voltage from your car battery (below 5V), the Ultra Capacitor Jump Starter has a small back up battery reserve to assist in jump starting your vehicle.
Features:
3-in-1 Unit: Jump Starter, Power Bank and Torch.
Light weight: Under 2kg!
Powerful: 1000A Peak Current.
Quick charge: Using the voltage of your battery, the Ultra Capacitor Jump Starter doesn°€™t rely on the internal battery for jump starting (unless your car battery is °€˜dead°€™ below 5V).
The unit comes with battery clamps and has a built in LCD screen that displays your car battery voltage and capacitor information.
Charging Time for back up Battery: 4 hrs (5v,2A), 50 mins (12v, 10A).
Reverse -charge Protection: No reverse charging back to unit after the vehicle is started.
Reverse Polarity Protection: No damage while the clamps are connected to the wrong terminals.
Short-Circuit Protection: Prevents short-circuit occurring while two clamps are connected.
Over-discharge Protection: Prevents over-discharge of the battery in the jump starter.
Over-temperature Protection: Automatic stop function when the temperature gets too high.

NTN/SNR Portable induction heater Smart Temp (Small)
The NTN-SNR bearing induction heaters are intended for heating rolling bearings. Other metal components forming a closed circuit such as bushings, shrink rings, pulleys and gears can also be heated. This will facilitate mounting where an interference fit is required.
ADVANTAGES
Small, light heater: weighs only 21 kg.
Easy to use, ideal for working on site.
Designed for all bearings and rotating parts with a bore diameter above 10 mm with a maximum diameter of 400 mm and a maximum weight of 50 kg.

Inlet: 1'' BSP&

Tractor Start For positive starting of Petrol, Diesel and Paraffin Engines, even under freezing conditions. Contains upper cylinder lubricant.