Self LockingSwivel Hooks

New anti-friction bearing design allows hook to rotate freely under load
Capacities ranging from 2 through 15 metric tonnes
Forged - Quenched and Tempered
Proper design, careful forging, and precision controlled quench and tempering gives maximum strength without excessive weight and bulk.
Low profile hook tip designed to utilize Crosby S-4320 or PL-N Latch kit. Even years after purchase of the original hook, latch assemblies can be added.
L-3322 hooks incorporate markings forged into the product which address two (2) QUIC-CHECK® features:
Deformation Indicators — Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows for a QUICCHECK ® measurement to determine if the throat opening has changed, thus indicating abuse or overload
Angle Indicators — Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two sling legs.

New anti-friction bearing design allows hook to rotate freely under load
Capacities ranging from 2 through 15 metric tonnes
Forged - Quenched and Tempered
Proper design, careful forging, and precision controlled quench and tempering gives maximum strength without excessive weight and bulk.
Low profile hook tip designed to utilize Crosby S-4320 or PL-N Latch kit. Even years after purchase of the original hook, latch assemblies can be added.
L-3322 hooks incorporate markings forged into the product which address two (2) QUIC-CHECK® features:
Deformation Indicators — Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows for a QUICCHECK ® measurement to determine if the throat opening has changed, thus indicating abuse or overload
Angle Indicators — Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two sling legs.

Heavy duty stamped latch interlocks with the hook tip
High cycle, long life spring
Can be made into a Positive Locking Hook when proper cotter pin is utilized
Latch kits shipped unassembled and individually packaged with instructions
Meets the intent of OSHA Rule 1926.1431(g) and 1926.1501(g) (when secured with the bolt, nut and pin) for lifting personnel.

Safety hook with griplatch and ball-bearing for 360° rotation under full WLL. Fulfills requirements in: EN 1677:2008 (WLL +25%), ASTM A952/A952M-02 and AS 3776:2015.

Safety hook with griplatch and ball-bearing for 360° rotation under full WLL. Fulfills requirements in: EN 1677:2008 (WLL +25%), ASTM A952/A952M-02 and AS 3776:2015.

SWL: 3.20T
M.B.S.: 12.80T
Manufacturers Test Certificate available