J-B Adhesiveweld J-B Adhesive, the World's Strongest Bond, is a two-part epoxy resin that contains particles of iron and steel. Once set, it has properties similar to mild steel. J-B Adhesiveweld is a long term Permanent Repair Solution. Use it for sealing leaks in water pipes, petrol tanks, car batteries, cylinder heads, repair broken flanges on metal castings. Bond broken vehicle trim, both internal and external. Fix broken oven doors, kettles, fridge-freezers etc.
Key Properties.
Tensile strength 4000 psi.
Temperature resistant to 300°C
Workability Drill it, grind it, machine it, file it, tap it.
Chemical resistance to Oil, Petrol, Diesel, Battery Acid, Salt Water.
Bonds to any rigid surface Iron, Steel, Brass, Aluminium, Copper, Wood, Plastic, Glass, Fibre, Masonry.Working time 25 minutes.
Setting time 4 hours.
Full strength 16 hours.
Shelf life once opened. 25 years Guaranteed.
In stock (for UK mainland delivery only)
 Shipping Costs...
|
|
Add
|
BONDLOC® B495 Instant adhesive, Black (20gr).
Suitable for bonding a range of materials including metals, plastics, elastomers, wood, paper, leather and fabric.
Tensile strength 15 - 25Nmm².
Fixture Time: Less than 5 seconds
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
Can be used on a variety of substrates including wood, concrete, stone, tiles, rubber, foam, metals, rigid plastic, polyethylene, canvas fabrics, cardboard, paper and cork. It is also ideal for fixing polyethylene sheets, thermal insulation and for packing applications such as palletising or case sealing.
Colour : Clear
Base : Synthetic Rubber or Resin
Min Max Temp : -5°C - +80°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
BONDLOC® Superglue (3gr).
General purpose glue for bonding most materials, such as wood, card, metal, rubber and plastic.
Gives very high strength.
Bonds on close fitting parts.
Flash Point: 85°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Transparent, yellow to amber liquid activator used for increasing the cure speed of LOCTITE® anaerobic products under low prevailing temperatures.
LOCTITE® SF 7471 is transparent, yellow to amber liquid activator used where increased cure speed of LOCTITE® anaerobic products is required. It is especially recommended for applications with passive metals or inert surfaces and with large bond gaps. LOCTITE® SF 7471 is particularly recommended when prevailing temperature is low (Less than+15°C).
For large bond gaps
Speeds up cure on passive and active surfaces
On-part life Less than or = 7 days
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
LOCTITE® SF 7455 Accelerator is a general purpose, clear to light amber colored, cure-speed accelerator for LOCTITE® cyanoacrylate (instant) adhesives and is especially suited for post-application.
LOCTITE® SF 7455 Accelerator is a colourless, amine-based accelerator used to increase the cure speed of LOCTITE® instant adhesives. It is suitable for both pre- and post-application but ensures rapid fixturing when used post-application on instant adhesives. This product is typically used for securing wires or coils to PCBs, tamper-proofing adjustable components, mounting stand-offs, edge guides, etc. It can bond dissimilar materials, such as metals, glass or ceramics.
General purpose
Fast fixturing between close fitting parts
For post-application
For all substrates
IMPORTANT NOTE: This product was upgraded in 2021/2022. Please utilize the product IDH/item number to ensure correct SDS is downloaded.
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
LOCTITE® 480 is a toughened, fast curing instant adhesive that is ideal for bonding metal to metal, rubber or magnets, particularly in humid environments.
LOCTITE® 480 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and\or shear strength. It is a rubber-reinforced adhesive offering increased flexibility and peel strength along with enhanced shock resistance. The product provides rapid bonding for a wide range of materials, including metals, plastics and rubbers. LOCTITE® 480 exhibits good resistance in humid environments.
For applications where shock resistance is required or shock or peel loads are present
Ideal for bonding metal to metal, to rubber or magnets
Good resistance in humid environments
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
LOCTITE® 435 Instant Adhesive is a low viscosity, single component, toughened ethyl cyanoacrylate product that offers rapid bonding and excellent adhesion for a wide range of materials.
LOCTITE® 435 is a colourless, toughened, ethyl-based instant adhesive. It has a fixture time of 10 - 20 secs. It has high resistance to impact and shock loads, high peel strength and is suitable for bonding plastics, rubber, metals, porous and absorbent substrates and acidic surfaces. Good resistance in humid environments.
Toughened, clear
Ideal for bonding small to medium-size parts
Well suited to metals, magnets, rubbers and plastics
Fixture time of 10 - 20 secs.
Well suited to porous and/or acidic surfaces
Solvent-free
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
J-B Kwikweld J-B Kwik is the Strongest Kwik Set two part epoxy resin bond on the market. It contains particles of iron and steel to give it stregth and durability. J-B Kwik is an emergency solution or a permanent repair where the strength
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Superglue 3 Suitable for use with metal, rubber and plastics. Bonds in seconds.
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
LOCTITE® 401 is a general purpose, fast curing, instant adhesive that is ideal for use on porous substrates.
LOCTITE® 401 is a fast curing instant adhesive designed for the assembly of difficult-to-bond materials requiring uniform stress distribution and high tensile and\or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. LOCTITE® 401 is also suited to bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repairs and all types of small emergency repairs.
Universal instant adhesive
Very high strength on close-fitting parts
Perfect for all quick repairs and all types of small emergency repairs.
Bonds a wide range of similar or dissimilar substrates (metals, rubber, wood, cardboard, ceramics as well as most plastics)
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Structural Bonding - 2-component five-minute epoxy. General purpose. Excellent water resistance.
LOCTITE® EA 3430 is a five-minute, 2-component epoxy adhesive that ensures an optically clear bond line. The product develops high strength on a wide range of substrates and is water resistant. This adhesive is a general purpose bonder and ideal for many DIY applications. Due to the very clear bond line, it is also the product of choice for bonding glass, decorative panels and display. The medium viscosity and fast fixture time at room temperature ensure easy application.
Ultra-clear bond line
Easy and fast to apply at room temperature
Water resistant
General purpose bonder - suitable for a wide range of substrates
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Metal Set For repairing or filling iron, steel, brass, bronze, aluminium, copper, wood and concrete. Sets in 15 minutes. Can be drilled, filed, tapped, machined or painted. Resists temperatures up to 120°C.
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
TEROSON® VR 5080 is a multi-purpose high-strength adhesive tape for emergency repairs. It is ideal for temporarily repairing, reinforcing, fixing, sealing or protecting parts. The product adheres to any dry, oil- and dust-free surface and exhibits 100% water resistance and temperature resistance up to 70°C. It is suitable for indoor and outdoor applications.
Multi-purpose adhesive tape
Suitable for indoor and outdoor applications
100% water-resistant
Temperature-resistant up to 70°C
Emergency stop for leakages in pipes up to 4 bar pressure
Shipping Costs...
|
|
Add
|
TEROSON® VR 5080 is a multi-purpose high-strength adhesive tape for emergency repairs. It is ideal for temporarily repairing, reinforcing, fixing, sealing or protecting parts. The product adheres to any dry, oil- and dust-free surface and exhibits 100% water resistance and temperature resistance up to 70°C. It is suitable for indoor and outdoor applications.
Multi-purpose adhesive tape
Suitable for indoor and outdoor applications
100% water-resistant
Temperature-resistant up to 70°C
Emergency stop for leakages in pipes up to 4 bar pressure
Shipping Costs...
|
|
Add
|
Rapid bonding for a range of materials including metals, plastics, elastomers, wood, paper, leather and fabric.
Colour : Clear
Base : Ethyl
Viscosity : 90 - 120cps
Shear Strength : 15-25Nmm2
Fixture Time (EPDM) : Less than 5 seconds
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Designed for bonding rubbers, plastics and elastomeric materials. Ideal for O-rings and where a rapid fixture is required.
Colour : Clear
Base : Ethyl
Viscosity : 25 - 35cps
Shear Strength : 15 - 25Nmm2
Fixture Time (EPDM) : Less than 5 seconds
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
A steel-filled epoxy putty for general maintenance and repairs. For filling, rebuilding and bonding metal surfaces. Can be sanded, drilled and painted once cured.
Colour : Grey
Viscosity : Putty
Full Cure : 24 hrs
Sandable : 20 mins
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Fast and permanent repairs to most plastic surfaces. Ideal for emergencies.
Colour : Light Blue
Viscosity : Putty
Full Cure : 24 hrs
Sandable : 20 mins
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Epoxy resin suitable for bonding a wide variety of surfaces including steel, aluminium, and galvanised iron. Product reacts within a few minutes to give a tough resilient bond.
Mix Ratio : 1:1
Colour : Clear
Viscosity : Viscous Liquid
Tensile Strength (Steel) : 3.8Nmm2
Working Time :Less than 3 mins
Fixture Time : Less than 5 mins
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
A steel-filled epoxy putty for general maintenance and repairs. Can be used to repair worn or fatigued metals, patch castings, making jigs and fixtures, rebuild pumps and valve bodies.
Mix Ratio : 1:1
Colour : Grey
Viscosity : 50,000 - 75,000cps
Tensile Strength (Steel) : 14-18Nmm2
Working Time : Less than 4 mins
Fixture Time : Less than7 mins
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
BONDLOC® BCA brushable Superglue (5gr).
Suitable for bonding metals, plastics, wood, ceramics, rubber, leather card, glass and many other materials.
Flash Point : 85°C.
Fixture Time: Less than 5 seconds.
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
BONDLOC® Get A Grip Adhesive (310ml).
High strength adhesive which eliminates the need for nails & screws in many DIY and repair jobs.
Bonds wood, plastic, brick, metal, glass, ceramics & plaster.
Fills minor gaps in uneven surfaces.
The high viscosity of this product allows non sagging bonding for light elements.
Service temperature range: -10°C - +70°C.
Flash Point: Less than 20°C.
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
BONDLOC® Contact Adhesive (500ml).
High performance, easy to use, fast drying.
Bonds: Wood, Metal, Rubber and Plastic.
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Fast and permanent repairs to most plastic surfaces. Ideal for emergencies.
Colour : Light Blue
Viscosity : Putty
Full Cure : 24 hrs
Sandable : 20 mins
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
LOCTITE® Super Glue (3ml).
General purpose for bonding most materials such as plastic, rubber, metal, card and wood
Gives very high strength bonds on close fitting parts.
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
LOCTITE® SF 7649 is a solvent-based activator for surface preparation that provides for low temperature curing.
LOCTITE® SF 7649 is designed to promote the curing speed of LOCTITE® anaerobic adhesives and sealants without any significant loss of joint strength. It is especially recommended for applications with passive metals or inert surfaces and with large bond gaps. LOCTITE® SF 7649 offers good performance at low cure temperatures, and is recommended when the application temperature is below 15°C.
Increases cure speed on passive and inactive surfaces
For low-temperature curing (Less than5°C)
For large bond gaps
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|