Protective Eyewear

Gas Welding Goggles with Ø50mm lense
Shade Density: 5
Fully adjustable headband

LENS-WELDING MASK-GREEN

Eye Shield

Contains: S.11639 x 1 pc.

BS 2092 1CDM
Provides full eye protection against chemical splash, dust and molten metal hazards.
Special ventilation slits prevent dust and small particles entering.

Soft rubber body
Exceptional fit and comfort
Withstands high temperatures
Anti scratch
Anti mist

LENS-WELDING MASK-CLEAR

Panoramic and lightweight RUSH model offers perfect optical quality, permanent comfort and modern design. Frame has protection against everyday risks including dropping onto the ground, ageing by light exposure & exposure to heat or corrosion.
CLEANING: The lenses should be cleaned regularly. Bollé Safety recommends only using the B-clean lens cleaning system (S.162431).
MAINTENANCE: Pitted, scratched or damaged lenses must be replaced by replacing the complete product. If the frame is damaged also replace the complete product.
After each use it is recommended to keep the spectacles in a rigid case (S.162430).
Upper protection.
Adjustable non slip bridge.
Non slip temples.
All-round Vision.
Resistance to surface damage by fine particles at extreme temperatures.
Low energy impact, resists a 6mm, 0.86g ball at 45m/s.
Supplied with Cord.
CE Approved

Panoramic and lightweight CONTOUR model is a sturdy, stylish, comfortable and lightweight while providing quality in a modern sturdy design.
CLEANING: The lenses should be cleaned regularly. Bollé Safety recommends only using the B-clean lens cleaning system (S.162431).
MAINTENANCE: Pitted, scratched or damaged lenses must be replaced by replacing the complete product. If the frame is damaged also replace the complete product.
After each use it is recommended to keep the spectacles in a rigid case (S.162430).
Non slip bridge.
Non slip tip-grip temples.
Anti-static
All round vision
Resistance to surface damage by fine particles at extreme temperatures.
Resistance to fogging.
Low energy impact, resists a 6mm, 0.86g ball at 45m/s.
Frame has protection against everyday risks including dropping onto the ground, ageing by light exposure & exposure to heat or corrosion.
Supplied with micro-fibre pouch.
CE Approved

Ultra-comfortable and technical TRACKER provides protection from all mechanical risks and also chemical risks making it unique in the safety glasses range.
CLEANING: The lenses should be cleaned regularly. Bollé Safety recommends only using the B-clean lens cleaning system (S.162431).
MAINTENANCE: Pitted, scratched or damaged lenses must be replaced by replacing the complete product. If the frame is damaged also replace the complete product.
After each use it is recommended to keep the spectacles in a rigid case (S.162430).
Upper protection.
Side ventilation.
Removable foam reinforcement with direct ventilation.
Lower protection.
Removable adjustable strap.
Resistance to surface damage by fine particles at extreme temperatures.
Resistance to fogging.
Lens and frame low energy impact, resists 6mm, 0.86g ball at 45 m/s - when worn without strap
Lens and frame medium energy impact, resists 6mm, 0.86g ball at 120m/s - when worn with strap
Frame has protection against everyday risks including dropping onto the ground, ageing by light exposure & exposure to heat or corrosion.
Frame resistant to Liquid droplets or splashes & large dust particles up to 5 microns
Supplied with micro-fibre pouch & strap.
CE Approved

A comfortable and ultra lightweight polycarbonate model. SILIUM+ is an excellent choice, combining style, ergonomics and performances for extended use.
CLEANING: The lenses should be cleaned regularly. Bollé Safety recommends only using the B-clean lens cleaning system (S.162431).
MAINTENANCE: Pitted, scratched or damaged lenses must be replaced by replacing the complete product. If the frame is damaged also replace the complete product.
After each use it is recommended to keep the spectacles in a rigid case (S.162430).
The new exclusive scratch and fog resistant coating guarantees even more safety, reliability and comfort.
Washable (water and soap), this permanent coating applied on both sides of the lens makes it highly scratch resistant and durably delays the appearance of fogging.
Ultra lightweight Frame.
Resistance to surface damage by fine particles at extreme temperatures.
Resistance to fogging.
Lens & frame low energy impact, resists a 6 mm, 0.86 g ball at 45 m/s.
Straight, Highly Flexible Ergonomic Temples.
Non-Slip adjustable bridge.
All-round Vision.
Resistance to surface damage by fine particles.
Free micro fibre bag.
CE Approved

SILEX has a panoramic vision, an ultra-wraparound protection, lenses with a refined design and coloured temples by Bollé Safety. No compromise on performance, comfort, style and accessibility, SILEX is suitable for all industries such as Agriculture, construction, automotive, mining, production line. FLEX 160° technology to perfectly fit each face, bi-material temples for flexibility and perfect support without pressure points.
CLEANING: The lenses should be cleaned regularly. Bollé Safety recommends only using the B-clean lens cleaning system (S.162431).
MAINTENANCE: Pitted, scratched or damaged lenses must be replaced by replacing the complete product. If the frame is damaged also replace the complete product.
After each use it is recommended to keep the spectacles in a rigid case (S.162430).
Ultra Wraparound Frame.
PC/TPR co-injected temples for greater comfort.
Panoramic field of vision.
Resistance to surface damage by fine particles.
Resistance to fogging.
Lens & frame low energy impact, resists a 6mm, 0.86g ball at 45m/s.
CE Approved

The RUSH + adopts an ultra-sporty design with its co-injected and ultra-flexible temples.
CLEANING: The lenses should be cleaned regularly. Bollé Safety recommends only using the B-clean lens cleaning system (S.162431).
MAINTENANCE: Pitted, scratched or damaged lenses must be replaced by replacing the complete product. If the frame is damaged also replace the complete product.
After each use it is recommended to keep the spectacles in a rigid case (S.162430).
Co-Injected, Ultra flex temples.
Upper Protection.
Non slip adjustable bridge.
Resistance to surface damage by fine particles.
Resistance to fogging.
Lens & frame low energy impact, resists a 6mm, 0.86g ball at 45m/s.
CE Approved

Black polyester Case with belt clip and belt loop
Dimensions: 190 x 80 x 75mm

Clear acrylic display
Screen printed logo to one side
5 x aluminium nose pieces (removable)
Width: 200mm
Depth: 1100mm
Height: 500mm
Display Stand Only, Glasses sold separately