We have the largest range of Tractor Parts, Accessories and Wearing Parts Online in the UK!
Type in what you are looking for and hit ENTER

Suggestions

              Home / Accessories / Towing & Fasteners / Screws & Fasteners / Washers 373 match(es)
              Assorted Washers

              Assorted Washers

              Everything listed below are OEM spec non-genuine parts (unless stated otherwise).

              Check application compatibility for Zetor, Massey Ferguson, Ford New Holland and Landini by looking at the technical specification section by clicking on the item to view product details.

              All our Copper - Metric Washers, Flat Washers, Repair Washers, Shim Washers, Spring Washers 'Metric Shim Washer, ID: 25mm, OD: 35mm (Din 988) (S.14659)' are delivered free to the UK if you spend over £150+VAT.

              Look no further for Starlock branded items.

              Sparex branded Assorted Washers .Starlock branded Assorted Washers .
              VAT (20%)
              Showing 151 - 180 of 373 items found, sorted by:
              Metric Repair Washer, ID: 7mm, OD: 39mm, DIN | Standard No. DIN 7973)
              S.12393
              Metric Repair Washer, ID: 7mm, OD: 39mm, DIN | Standard No. DIN 7973)
              In stock (for delivery only)

              Assorted Washers

               
              £8.02
              Inc VAT
              (per 50)
              Add
              Min.(Qty) 50
              Metric Repair Washer, ID: 8mm, OD: 25mm, DIN | Standard No. DIN 7973)
              S.12394
              Metric Repair Washer, ID: 8mm, OD: 25mm, DIN | Standard No. DIN 7973)
              In stock (for delivery only)

              Assorted Washers

               
              £4.61
              Inc VAT
              (per 50)
              Add
              Min.(Qty) 50
              Metric Repair Washer, ID: 8mm, OD: 33mm, DIN | Standard No. DIN 7973)
              S.12395
              Metric Repair Washer, ID: 8mm, OD: 33mm, DIN | Standard No. DIN 7973)
              In stock (for delivery only)

              Assorted Washers

               
              £7.04
              Inc VAT
              (per 50)
              Add
              Min.(Qty) 50
              Metric Repair Washer, ID: 8mm, OD: 39mm, DIN | Standard No. DIN 7973)
              S.12396
              Metric Repair Washer, ID: 8mm, OD: 39mm, DIN | Standard No. DIN 7973)
              In stock (for delivery only)

              Assorted Washers

               
              £9.30
              Inc VAT
              (per 50)
              Add
              Min.(Qty) 50
              Metric Repair Washer, ID: 8mm, OD: 51mm, DIN | Standard No. DIN 7973)
              S.12397
              Metric Repair Washer, ID: 8mm, OD: 51mm, DIN | Standard No. DIN 7973)
              In stock (for delivery only)

              Assorted Washers

               
              £17.79
              Inc VAT
              (per 50)
              Add
              Min.(Qty) 50
              Metric Repair Washer, ID: 10mm, OD: 25mm, DIN | Standard No. DIN 7973)
              S.12398
              Metric Repair Washer, ID: 10mm, OD: 25mm, DIN | Standard No. DIN 7973)
              In stock (for delivery only)

              Assorted Washers

               
              £2.06
              Inc VAT
              (per 50)
              Add
              Min.(Qty) 50
              Metric Repair Washer, ID: 10mm, OD: 33mm, DIN | Standard No. DIN 7973)
              S.12399
              Metric Repair Washer, ID: 10mm, OD: 33mm, DIN | Standard No. DIN 7973)
              In stock (for delivery only)

              Assorted Washers

               
              £4.27
              Inc VAT
              (per 50)
              Add
              Min.(Qty) 50
              Metric Repair Washer, ID: 10mm, OD: 39mm, DIN | Standard No. DIN 7973)
              S.12400
              Metric Repair Washer, ID: 10mm, OD: 39mm, DIN | Standard No. DIN 7973)
              In stock (for delivery only)

              Assorted Washers

               
              £6.81
              Inc VAT
              (per 25)
              Add
              Min.(Qty) 25
              Metric Repair Washer, ID: 10mm, OD: 51mm, DIN | Standard No. DIN 7973)
              S.12401
              Metric Repair Washer, ID: 10mm, OD: 51mm, DIN | Standard No. DIN 7973)
              In stock (for delivery only)

              Assorted Washers

               
              £9.00
              Inc VAT
              (per 25)
              Add
              Min.(Qty) 25
              Metric Repair Washer, ID: 7mm, OD: 25mm, DIN | Standard No. DIN 7973)
              S.13360
              Metric Repair Washer, ID: 7mm, OD: 25mm, DIN | Standard No. DIN 7973)
              In stock (for delivery only)

              Assorted Washers

               
              £4.72
              Inc VAT
              (per 50)
              Add
              Min.(Qty) 50
              Metric Repair Washer, ID: 7mm, OD: 33mm, DIN | Standard No. DIN 7973)
              S.13361
              Metric Repair Washer, ID: 7mm, OD: 33mm, DIN | Standard No. DIN 7973)
              In stock (for delivery only)

              Assorted Washers

               
              £6.99
              Inc VAT
              (per 50)
              Add
              Min.(Qty) 50
              Metric Repair Washer, ID: 8mm, OD: 25mm, DIN | Standard No. DIN 7973)
              S.13363
              Metric Repair Washer, ID: 8mm, OD: 25mm, DIN | Standard No. DIN 7973)
              In stock (for delivery only)

              Assorted Washers

               
              £4.55
              Inc VAT
              (per 50)
              Add
              Min.(Qty) 50
              Metric Repair Washer, ID: 8mm, OD: 33mm, DIN | Standard No. DIN 7973)
              S.13364
              Metric Repair Washer, ID: 8mm, OD: 33mm, DIN | Standard No. DIN 7973)
              In stock (for delivery only)

              Assorted Washers

               
              £7.00
              Inc VAT
              (per 50)
              Add
              Min.(Qty) 50
              Metric Repair Washer, ID: 8mm, OD: 39mm, DIN | Standard No. DIN 7973)
              S.13365
              Metric Repair Washer, ID: 8mm, OD: 39mm, DIN | Standard No. DIN 7973)
              In stock (for delivery only)

              Assorted Washers

               
              £9.46
              Inc VAT
              (per 50)
              Add
              Min.(Qty) 50
              Metric Repair Washer, ID: 8mm, OD: 51mm, DIN | Standard No. DIN 7973)
              S.13366
              Metric Repair Washer, ID: 8mm, OD: 51mm, DIN | Standard No. DIN 7973)
              In stock (for delivery only)

              Assorted Washers

               
              £21.49
              Inc VAT
              (per 50)
              Add
              Min.(Qty) 50
              Metric Repair Washer, ID: 10mm, OD: 25mm, DIN | Standard No. DIN 7973)
              S.13367
              Metric Repair Washer, ID: 10mm, OD: 25mm, DIN | Standard No. DIN 7973)
              In stock (for delivery only)

              Assorted Washers

               
              £3.70
              Inc VAT
              (per 50)
              Add
              Min.(Qty) 50
              Metric Repair Washer, ID: 10mm, OD: 33mm, DIN | Standard No. DIN 7973)
              S.13368
              Metric Repair Washer, ID: 10mm, OD: 33mm, DIN | Standard No. DIN 7973)
              In stock (for delivery only)

              Assorted Washers

               
              £5.84
              Inc VAT
              (per 50)
              Add
              Min.(Qty) 50
              Metric Repair Washer, ID: 10mm, OD: 51mm, DIN | Standard No. DIN 7973)
              S.13370
              Metric Repair Washer, ID: 10mm, OD: 51mm, DIN | Standard No. DIN 7973)
              In stock (for delivery only)

              Assorted Washers

               
              £9.25
              Inc VAT
              (per 25)
              Add
              Min.(Qty) 25
              Metric Repair Washer, ID: 7 - 10mm, OD: 25.4 - 50.8mm, DIN | Standard No. DIN 7973), (Handipak 475 pcs.)
              S.14248
              Metric Repair Washer, ID: 7 - 10mm, OD: 25.4 - 50.8mm, DIN | Standard No. DIN 7973), (Handipak 475 pcs.)
              ID: 1/4 - 3/8'', OD: 1 - 2''
              In stock (for delivery only)

              Assorted Washers

               
              £110.34
              Inc VAT
              Add
              Metric Repair Washer, ID: 7 - 8mm, OD: 25.4 - 38.1mm, DIN | Standard No. DIN 7973), (Agripak 30 pcs.)
              S.14249
              Metric Repair Washer, ID: 7 - 8mm, OD: 25.4 - 38.1mm, DIN | Standard No. DIN 7973), (Agripak 30 pcs.)
              ID: 1/4 - 5/16'', OD: 1 - 1 1/2''
              In stock (for delivery only)

              Assorted Washers

               
              £5.51
              Inc VAT
              Add
              Imperial Starlock Washer, ID: 1/4''
              S.14325
              Imperial Starlock Washer, ID: 1/4''
              In stock (for delivery only)

              Assorted Washers

               
              £0.88
              Inc VAT
              (per 20)
              Add
              Min.(Qty) 20
              Imperial Starlock Washer, ID: 5/16''
              S.14326
              Imperial Starlock Washer, ID: 5/16''
              In stock (for delivery only)

              Assorted Washers

               
              £0.90
              Inc VAT
              (per 20)
              Add
              Min.(Qty) 20
              Imperial Starlock Washer, ID: 7/16''
              S.14328
              Imperial Starlock Washer, ID: 7/16''
              In stock (for delivery only)
              Recently Reduced From £6.84 inc VAT (06/08/2022 – 12/06/2023)

              Assorted Washers

               
              £0.09
              Inc VAT
              (per 50)
              Add
              Min.(Qty) 50
              Locking washer - Standard HEICO-LOCK® M4 x 7.6mm
              S.150468
              Locking washer - Standard HEICO-LOCK® M4 x 7.6mm
              The self-loosening of bolted joints is one of the most commonly occuring failure modes in the operation of machines and systems.
              HEICO-LOCK® wedge lock washers prevent loosening of the bolted joint by providing a safe and reliable bolt securing system - even for extremes of vibration or dynamic loads.
              Certified system for securing bolts, working at low and high preload levels
              Particularly suitable for dynamic loads – including when using lubricants
              Can be re-used
              Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair)
              Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nutsCertified system for securing bolts, working at low and high preload levels
              Particularly suitable for dynamic loads – including when using lubricants
              Can be re-used
              Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair)
              Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nuts
              In stock (for delivery only)

              Assorted Washers

               
              £18.50
              Inc VAT
              (per 200)
              Add
              Min.(Qty) 200
              Locking washer - Standard HEICO-LOCK® M5 x 9mm
              S.150469
              Locking washer - Standard HEICO-LOCK® M5 x 9mm
              The self-loosening of bolted joints is one of the most commonly occuring failure modes in the operation of machines and systems.
              HEICO-LOCK® wedge lock washers prevent loosening of the bolted joint by providing a safe and reliable bolt securing system - even for extremes of vibration or dynamic loads.
              Certified system for securing bolts, working at low and high preload levels
              Particularly suitable for dynamic loads – including when using lubricants
              Can be re-used
              Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair)
              Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nutsCertified system for securing bolts, working at low and high preload levels
              Particularly suitable for dynamic loads – including when using lubricants
              Can be re-used
              Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair)
              Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nuts
              In stock (for delivery only)

              Assorted Washers

               
              £59.51
              Inc VAT
              (per 200)
              Add
              Min.(Qty) 200
              Locking washer - Standard HEICO-LOCK® M6 x 10.8mm
              S.150470
              Locking washer - Standard HEICO-LOCK® M6 x 10.8mm
              The self-loosening of bolted joints is one of the most commonly occuring failure modes in the operation of machines and systems.
              HEICO-LOCK® wedge lock washers prevent loosening of the bolted joint by providing a safe and reliable bolt securing system - even for extremes of vibration or dynamic loads.
              Certified system for securing bolts, working at low and high preload levels
              Particularly suitable for dynamic loads – including when using lubricants
              Can be re-used
              Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair)
              Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nutsCertified system for securing bolts, working at low and high preload levels
              Particularly suitable for dynamic loads – including when using lubricants
              Can be re-used
              Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair)
              Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nuts
              In stock (for delivery only)

              Assorted Washers

               
              £63.01
              Inc VAT
              (per 200)
              Add
              Min.(Qty) 200
              Locking washer - Standard HEICO-LOCK® 1/4 x 11.5mm
              S.150471
              Locking washer - Standard HEICO-LOCK® 1/4 x 11.5mm
              The self-loosening of bolted joints is one of the most commonly occuring failure modes in the operation of machines and systems.
              HEICO-LOCK® wedge lock washers prevent loosening of the bolted joint by providing a safe and reliable bolt securing system - even for extremes of vibration or dynamic loads.
              Certified system for securing bolts, working at low and high preload levels
              Particularly suitable for dynamic loads – including when using lubricants
              Can be re-used
              Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair)
              Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nutsCertified system for securing bolts, working at low and high preload levels
              Particularly suitable for dynamic loads – including when using lubricants
              Can be re-used
              Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair)
              Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nuts
              In stock (for delivery only)

              Assorted Washers

               
              £18.50
              Inc VAT
              (per 200)
              Add
              Min.(Qty) 200
              Locking washer - Standard HEICO-LOCK® M8 x 13.5mm
              S.150472
              Locking washer - Standard HEICO-LOCK® M8 x 13.5mm
              The self-loosening of bolted joints is one of the most commonly occuring failure modes in the operation of machines and systems.
              HEICO-LOCK® wedge lock washers prevent loosening of the bolted joint by providing a safe and reliable bolt securing system - even for extremes of vibration or dynamic loads.
              Certified system for securing bolts, working at low and high preload levels
              Particularly suitable for dynamic loads – including when using lubricants
              Can be re-used
              Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair)
              Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nutsCertified system for securing bolts, working at low and high preload levels
              Particularly suitable for dynamic loads – including when using lubricants
              Can be re-used
              Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair)
              Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nuts
              In stock (for delivery only)

              Assorted Washers

               
              £66.51
              Inc VAT
              (per 200)
              Add
              Min.(Qty) 200
              Locking washer - Standard HEICO-LOCK® M10 x 16.6mm
              S.150473
              Locking washer - Standard HEICO-LOCK® M10 x 16.6mm
              The self-loosening of bolted joints is one of the most commonly occuring failure modes in the operation of machines and systems.
              HEICO-LOCK® wedge lock washers prevent loosening of the bolted joint by providing a safe and reliable bolt securing system - even for extremes of vibration or dynamic loads.
              Certified system for securing bolts, working at low and high preload levels
              Particularly suitable for dynamic loads – including when using lubricants
              Can be re-used
              Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair)
              Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nutsCertified system for securing bolts, working at low and high preload levels
              Particularly suitable for dynamic loads – including when using lubricants
              Can be re-used
              Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair)
              Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nuts
              In stock (for delivery only)

              Assorted Washers

               
              £81.38
              Inc VAT
              (per 200)
              Add
              Min.(Qty) 200
              Locking washer - Standard HEICO-LOCK® M11 x 18.5mm
              S.150474
              Locking washer - Standard HEICO-LOCK® M11 x 18.5mm
              The self-loosening of bolted joints is one of the most commonly occuring failure modes in the operation of machines and systems.
              HEICO-LOCK® wedge lock washers prevent loosening of the bolted joint by providing a safe and reliable bolt securing system - even for extremes of vibration or dynamic loads.
              Certified system for securing bolts, working at low and high preload levels
              Particularly suitable for dynamic loads – including when using lubricants
              Can be re-used
              Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair)
              Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nutsCertified system for securing bolts, working at low and high preload levels
              Particularly suitable for dynamic loads – including when using lubricants
              Can be re-used
              Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair)
              Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nuts
              In stock (for delivery only)

              Assorted Washers

               
              £96.18
              Inc VAT
              (per 200)
              Add
              Min.(Qty) 200
                 
              < Previous 1 2 3 4 5 6 7 8 9 10 .. >> Next >
               

              Quick Links.

              Product Highlights

              Account Information

              Legal Information

              Tractor parts described as suitable for original manufacturers on this site are Sparex branded tractor replacement parts and are not manufactured by the Original Equipment Manufacturer (OEM). Original Manufacturer’s names, part numbers and descriptions are quoted for reference purposes only and are not intended to indicate or suggest that our replacement parts are made by the OEM.
              Copyright 2020 Malpas Tractors Ltd, Curvica Ltd.
              Malpas Tractors Ltd is a company registered in England & Wales with number 2057260