Wire Ropes, Chains & Associated Components

Capacities 1/3 through 150 metric tons.
WLL and grade '6' permanently shown on every shackle.
Forged - Quenched and Tempered, with alloy bolts.
Hot Dip Galvanized or self coloured.
Fatigue rated (1/3t to 55t)
Shackles 25t and larger are RFID equipped.
Shackles 85t and larger are proof tested to 2x WLL.
Approved for use at -40° C (-40° F) to 204° C (400°F)
Meets or exceeds all requirements of ASME B30.26
Look for the Red Pin® . . . the mark of genuine Crosby quality.

Capacities 1/3 through 150 metric tons.
WLL and grade '6' permanently shown on every shackle.
Forged - Quenched and Tempered, with alloy bolts.
Hot Dip Galvanized or self coloured.
Fatigue rated (1/3t to 55t)
Shackles 25t and larger are RFID equipped.
Shackles 85t and larger are proof tested to 2x WLL.
Approved for use at -40° C (-40° F) to 204° C (400°F)
Meets or exceeds all requirements of ASME B30.26
Look for the Red Pin® . . . the mark of genuine Crosby quality.

Capacities 1/3 through 150 metric tons.
WLL and grade '6' permanently shown on every shackle.
Forged - Quenched and Tempered, with alloy bolts.
Hot Dip Galvanized or self coloured.
Fatigue rated (1/3t to 55t)
Shackles 25t and larger are RFID equipped.
Shackles 85t and larger are proof tested to 2x WLL.
Approved for use at -40° C (-40° F) to 204° C (400°F)
Meets or exceeds all requirements of ASME B30.26
Look for the Red Pin® . . . the mark of genuine Crosby quality.

Capacities 1/3 through 150 metric tons.
WLL and grade ''6'' permanently shown on every shackle.
Forged - Quenched and Tempered, with alloy bolts.
Hot Dip Galvanized or self coloured.
Fatigue rated (1/3t to 55t)
Shackles 25t and larger are RFID equipped.
Shackles 85t and larger are proof tested to 2x WLL.
Approved for use at -40° C (-40° F) to 204° C (400°F)
Meets or exceeds all requirements of ASME B30.26

Capacities 1/3 through 150 metric tons.
WLL and grade ''6'' permanently shown on every shackle.
Forged - Quenched and Tempered, with alloy bolts.
Hot Dip Galvanized or self coloured.
Fatigue rated (1/3t to 55t)
Shackles 25t and larger are RFID equipped.
Shackles 85t and larger are proof tested to 2x WLL.
Approved for use at -40° C (-40° F) to 204° C (400°F)
Meets or exceeds all requirements of ASME B30.26

Capacities 1/3 through 150 metric tons.
WLL and grade ''6'' permanently shown on every shackle.
Forged - Quenched and Tempered, with alloy bolts.
Hot Dip Galvanized or self coloured.
Fatigue rated (1/3t to 55t)
Shackles 25t and larger are RFID equipped.
Shackles 85t and larger are proof tested to 2x WLL.
Approved for use at -40° C (-40° F) to 204° C (400°F)
Meets or exceeds all requirements of ASME B30.26

Capacities 1/3 through 150 metric tons.
WLL and grade ''6'' permanently shown on every shackle.
Forged - Quenched and Tempered, with alloy bolts.
Hot Dip Galvanized or self coloured.
Fatigue rated (1/3t to 55t)
Shackles 25t and larger are RFID equipped.
Shackles 85t and larger are proof tested to 2x WLL.
Approved for use at -40° C (-40° F) to 204° C (400°F)
Meets or exceeds all requirements of ASME B30.26

Capacities 1/2 to 85 metric tons, grade 6
Working Load Limit and grade '6' permanently shown on every shackle
Forged — Quenched and Tempered, with alloy pins
Hot Dip galvanized or self coloured. (85, 120, and 150 metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)
Sizes 3/8'' and below are mechanically galvanized
Fatigue rated (1/2t - 55t)
Shackles 25t and larger are RFID EQUIPPED
Approved for use at -40° C (-40 degrees F) to 204° C (400° F)
Meets or exceeds all requirements of ASME B30.26
Sizes 1/2 - 25t meet the performance requirements of EN13889:2003
Shackles 55 metric tons and smaller can be furnished proof tested with certificate to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance available. Certificates available when requested at time of order and may include additional charges
All 2150 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg at -20° C (-4° F) upon special request
Look for the Red Pin® . . . the mark of genuine Crosby quality.

Capacities 1/2 to 85 metric tons, grade 6
Working Load Limit and grade '6' permanently shown on every shackle
Forged — Quenched and Tempered, with alloy pins
Hot Dip galvanized or self coloured. (85, 120, and 150 metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)
Sizes 3/8'' and below are mechanically galvanized
Fatigue rated (1/2t - 55t)
Shackles 25t and larger are RFID EQUIPPED
Approved for use at -40° C (-40 degrees F) to 204° C (400° F)
Meets or exceeds all requirements of ASME B30.26
Sizes 1/2 - 25t meet the performance requirements of EN13889:2003
Shackles 55 metric tons and smaller can be furnished proof tested with certificate to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance available. Certificates available when requested at time of order and may include additional charges
All 2150 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg at -20° C (-4° F) upon special request
Look for the Red Pin® . . . the mark of genuine Crosby quality.

Capacities 1/2 to 85 metric tons, grade 6
Working Load Limit and grade '6' permanently shown on every shackle
Forged — Quenched and Tempered, with alloy pins
Hot Dip galvanized or self coloured. (85, 120, and 150 metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)
Sizes 3/8'' and below are mechanically galvanized
Fatigue rated (1/2t - 55t)
Shackles 25t and larger are RFID EQUIPPED
Approved for use at -40° C (-40 degrees F) to 204° C (400° F)
Meets or exceeds all requirements of ASME B30.26
Sizes 1/2 - 25t meet the performance requirements of EN13889:2003
Shackles 55 metric tons and smaller can be furnished proof tested with certificate to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance available. Certificates available when requested at time of order and may include additional charges
All 2150 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg at -20° C (-4° F) upon special request
Look for the Red Pin® . . . the mark of genuine Crosby quality.

Capacities 1/2 to 85 metric tons, grade 6
Working Load Limit and grade '6' permanently shown on every shackle
Forged — Quenched and Tempered, with alloy pins
Hot Dip galvanized or self coloured. (85, 120, and 150 metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)
Sizes 3/8'' and below are mechanically galvanized
Fatigue rated (1/2t - 55t)
Shackles 25t and larger are RFID EQUIPPED
Approved for use at -40° C (-40 degrees F) to 204° C (400° F)
Meets or exceeds all requirements of ASME B30.26
Sizes 1/2 - 25t meet the performance requirements of EN13889:2003
Shackles 55 metric tons and smaller can be furnished proof tested with certificate to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance available. Certificates available when requested at time of order and may include additional charges
All 2150 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg at -20° C (-4° F) upon special request
Look for the Red Pin® . . . the mark of genuine Crosby quality.

Forged alloy steel - Quenched and Tempered
Individually Proof Tested to 2 1/2 times the Working Load Limit with certification
Each hook has a Product Identification Code (PIC) for material traceability ,along with the size and the name Crosby
Suitable for use with Grade 100 and Grade 80 chain
Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles
''Look for the Platinum Colour - Crosby Grade 100 Alloy Products.'' Hook can be tip loaded at the reduced Working Load Limit. Operator must ensure the load is retained properly in the hook.

New anti-friction bearing design allows hook to rotate freely under load
Capacities ranging from 2 through 15 metric tonnes
Forged - Quenched and Tempered
Proper design, careful forging, and precision controlled quench and tempering gives maximum strength without excessive weight and bulk.
Low profile hook tip designed to utilize Crosby S-4320 or PL-N Latch kit. Even years after purchase of the original hook, latch assemblies can be added.
L-3322 hooks incorporate markings forged into the product which address two (2) QUIC-CHECK® features:
Deformation Indicators — Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows for a QUICCHECK ® measurement to determine if the throat opening has changed, thus indicating abuse or overload
Angle Indicators — Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two sling legs.

New anti-friction bearing design allows hook to rotate freely under load
Capacities ranging from 2 through 15 metric tonnes
Forged - Quenched and Tempered
Proper design, careful forging, and precision controlled quench and tempering gives maximum strength without excessive weight and bulk.
Low profile hook tip designed to utilize Crosby S-4320 or PL-N Latch kit. Even years after purchase of the original hook, latch assemblies can be added.
L-3322 hooks incorporate markings forged into the product which address two (2) QUIC-CHECK® features:
Deformation Indicators — Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows for a QUICCHECK ® measurement to determine if the throat opening has changed, thus indicating abuse or overload
Angle Indicators — Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two sling legs.

Heavy duty stamped latch interlocks with the hook tip
High cycle, long life spring
Can be made into a Positive Locking Hook when proper cotter pin is utilized
Latch kits shipped unassembled and individually packaged with instructions
Meets the intent of OSHA Rule 1926.1431(g) and 1926.1501(g) (when secured with the bolt, nut and pin) for lifting personnel.