We have the largest range of Tractor Parts, Accessories and Wearing Parts Online in the UK!
Type in what you are looking for and hit ENTER

Suggestions

              Bow & 'D' Shackles

              Bow & 'D' Shackles

              Malpasonline has all your maintenance, repair and restoration needs covered.

              Check application compatibility for Massey Ferguson, Ford New Holland and Landini by looking at the technical specification section by clicking on the item to view product details.

              Our 'Screw Type D Shackle, Pin Ø6-13mm x 12-24mm Jaw Width (10pcs. Agripak) (S.23373)' Bow & 'D' Shackles' is an exceptional, high quality item.

              Sparex branded Bow & 'D' Shackles .
              Showing 1 - 30 of 116 items found, sorted by:
              D Shackle, Pin Ø12mm, Jaw Width: 18mm
              Size: 10 x 13mm,
              Internal Length: 35mm.
              In stock (for delivery only)
               
              £6.36
              Inc VAT
              Add
              D Shackle, Pin Ø16mm, Jaw Width: 21mm
               
              £7.40
              Inc VAT
              Add
              D Shackle, Pin Ø14mm, Jaw Width: 20mm
              Size: 14mm,
              Internal Length: 35mm.
              Out of Stock
               
              £4.19
              Inc VAT
              Add
              D Shackle, Pin Ø16mm, Jaw Width: 23mm
              Size: 12 x 14mm,
              Internal Length: 46mm.
              Out of Stock
               
              £5.22
              Inc VAT
              Add
              D Shackle, Pin Ø13.25mm, Jaw Width: 25mm
              Size: 13mm,
              Internal Length
              In stock (for delivery only)
               
              £1.68
              Inc VAT
              Add
              Bow Shackle, Rated: 2T (4400lbs)
              Size: 13mm, Internal Length: 46mm.
              In stock (for delivery only)
               
              £3.80
              Inc VAT
              Add
              Screw Type D Shackle, Pin Ø6-13mm x 12-24mm Jaw Width (10 pcs. Agripak)
               
              £12.14
              Inc VAT
              Add
              D Shackle, Pin Ø13mm, Jaw Width: 25.4mm
              Size: 11mm,
              Internal Length: 47mm.
              In stock (for delivery only)
               
              £10.59
              Inc VAT
              Add
              Screw Type D Shackle, Pin Ø8mm x 16mm Jaw Width
              Size: 8mm, Internal Length: 30mm.
              In stock (for delivery only)
               
              £9.96
              Inc VAT
              (per 5)
              Add
              Min.(Qty) 5
              D Shackle, Pin Ø9mm, Jaw Width: 11mm
               
              £6.46
              Inc VAT
              (per 5)
              Add
              Min.(Qty) 5
              D Shackle, Pin Ø19mm, Jaw Width: 48mm
              Size: 19mm,
              Internal Length: 75mm.
              Out of Stock
               
              £54.26
              Inc VAT
              (per 5)
              Add
              Min.(Qty) 5
              D Shackle, Pin Ø6mm, Jaw Width: 13mm
              Size: 6mm,
              Internal Length: 23mm.
              In stock (for delivery only)
               
              £5.35
              Inc VAT
              (per 5)
              Add
              Min.(Qty) 5
              £7.93
              Inc VAT
              (per 5)
              Add
              Min.(Qty) 5
              D Shackle, Pin Ø8mm, Jaw Width: 13mm
              Size: 8mm,
              Internal Length: 32mm.
              Out of Stock
               
              £18.13
              Inc VAT
              (per 5)
              Add
              Min.(Qty) 5
              D Shackle, Pin Ø10mm, Jaw Width: 18mm
              Size: 10mm,
              Internal Length: 41mm.
              Out of Stock
               
              £22.43
              Inc VAT
              (per 5)
              Add
              Min.(Qty) 5
              D Shackle, Pin Ø11mm, Jaw Width: 22mm
              Size: 11mm,
              Internal Length: 41mm.
              In stock (for delivery only)
               
              £26.89
              Inc VAT
              (per 5)
              Add
              Min.(Qty) 5
              D Shackle, Pin Ø13mm, Jaw Width: 25.4mm
              Size: 11mm,
              Internal Length: 47mm.
              Out of Stock
               
              £23.13
              Inc VAT
              (per 5)
              Add
              Min.(Qty) 5
              Screw Pin Anchor Shackle G209 - SWL: 1/3T, Size: 3/16'' (5 pcs.)
              Capacities 1/3 to 55 metric tons, grade 6
              Forged - Quenched and Tempered, with alloy pins
              Working Load Limit and grade '6' permanently shown on every shackle
              Hot Dip galvanized or self coloured
              Sizes 3/8 inch and below are mechanically galvanized
              Fatigue rated
              Shackles 25t and larger are RFID EQUIPPED
              Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
              Approved for use at -40° C (-40° F) to 204° C (400° F).
              All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
              Meets or exceeds all requirements of ASME B30.26
              Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
              Look for the Red Pin°® . . . the mark of genuine Crosby quality.
              In stock (for delivery only)
               
              £28.75
              Inc VAT
              Add
              Screw Pin Anchor Shackle G209 - SWL: 1/2T, Size: 1/4'' (5 pcs.)
              Capacities 1/3 to 55 metric tons, grade 6
              Forged - Quenched and Tempered, with alloy pins
              Working Load Limit and grade '6' permanently shown on every shackle
              Hot Dip galvanized or self coloured
              Sizes 3/8 inch and below are mechanically galvanized
              Fatigue rated
              Shackles 25t and larger are RFID EQUIPPED
              Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
              Approved for use at -40° C (-40° F) to 204° C (400° F).
              All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
              Meets or exceeds all requirements of ASME B30.26
              Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
              Look for the Red Pin°® . . . the mark of genuine Crosby quality.
              In stock (for delivery only)
               
              £29.63
              Inc VAT
              Add
              Screw Pin Anchor Shackle G209 - SWL: 3/4T, Size: 5/16'' (5 pcs.)
              Capacities 1/3 to 55 metric tons, grade 6
              Forged - Quenched and Tempered, with alloy pins
              Working Load Limit and grade '6' permanently shown on every shackle
              Hot Dip galvanized or self coloured
              Sizes 3/8 inch and below are mechanically galvanized
              Fatigue rated
              Shackles 25t and larger are RFID EQUIPPED
              Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
              Approved for use at -40° C (-40° F) to 204° C (400° F).
              All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
              Meets or exceeds all requirements of ASME B30.26
              Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
              Look for the Red Pin°® . . . the mark of genuine Crosby quality.
              In stock (for delivery only)
               
              £29.19
              Inc VAT
              Add
              Screw Pin Anchor Shackle G209 - SWL: 1T, Size: 3/8'' (5 pcs.)
              Capacities 1/3 to 55 metric tons, grade 6
              Forged - Quenched and Tempered, with alloy pins
              Working Load Limit and grade '6' permanently shown on every shackle
              Hot Dip galvanized or self coloured
              Sizes 3/8 inch and below are mechanically galvanized
              Fatigue rated
              Shackles 25t and larger are RFID EQUIPPED
              Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
              Approved for use at -40° C (-40° F) to 204° C (400° F).
              All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
              Meets or exceeds all requirements of ASME B30.26
              Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
              Look for the Red Pin°® . . . the mark of genuine Crosby quality.
              In stock (for delivery only)
               
              £33.64
              Inc VAT
              Add
              Screw Pin Anchor Shackle G209 - SWL: 1 1/2T, Size: 7/16'' (5 pcs.)
              Capacities 1/3 to 55 metric tons, grade 6
              Forged - Quenched and Tempered, with alloy pins
              Working Load Limit and grade '6' permanently shown on every shackle
              Hot Dip galvanized or self coloured
              Sizes 3/8 inch and below are mechanically galvanized
              Fatigue rated
              Shackles 25t and larger are RFID EQUIPPED
              Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
              Approved for use at -40° C (-40° F) to 204° C (400° F).
              All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
              Meets or exceeds all requirements of ASME B30.26
              Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
              Look for the Red Pin°® . . . the mark of genuine Crosby quality.
              In stock (for delivery only)
               
              £37.33
              Inc VAT
              Add
              Screw Pin Anchor Shackle G209 - SWL: 2T, Size: 1/2'' (5 pcs.)
              Capacities 1/3 to 55 metric tons, grade 6
              Forged - Quenched and Tempered, with alloy pins
              Working Load Limit and grade '6' permanently shown on every shackle
              Hot Dip galvanized or self coloured
              Sizes 3/8 inch and below are mechanically galvanized
              Fatigue rated
              Shackles 25t and larger are RFID EQUIPPED
              Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
              Approved for use at -40° C (-40° F) to 204° C (400° F).
              All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
              Meets or exceeds all requirements of ASME B30.26
              Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
              Look for the Red Pin°® . . . the mark of genuine Crosby quality.
              In stock (for delivery only)
               
              £47.10
              Inc VAT
              Add
              Screw Pin Anchor Shackle G209 - SWL: 3 1/4T, Size: 5/8'' (1 pc.)
              Capacities 1/3 to 55 metric tons, grade 6
              Forged - Quenched and Tempered, with alloy pins
              Working Load Limit and grade '6' permanently shown on every shackle
              Hot Dip galvanized or self coloured
              Sizes 3/8 inch and below are mechanically galvanized
              Fatigue rated
              Shackles 25t and larger are RFID EQUIPPED
              Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
              Approved for use at -40° C (-40° F) to 204° C (400° F).
              All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
              Meets or exceeds all requirements of ASME B30.26
              Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
              Look for the Red Pin°® . . . the mark of genuine Crosby quality.
              In stock (for delivery only)
               
              £12.62
              Inc VAT
              Add
              Screw Pin Anchor Shackle G209 - SWL: 4 3/4T, Size: 3/4'' (1 pc.)
              Capacities 1/3 to 55 metric tons, grade 6
              Forged - Quenched and Tempered, with alloy pins
              Working Load Limit and grade '6' permanently shown on every shackle
              Hot Dip galvanized or self coloured
              Sizes 3/8 inch and below are mechanically galvanized
              Fatigue rated
              Shackles 25t and larger are RFID EQUIPPED
              Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
              Approved for use at -40° C (-40° F) to 204° C (400° F).
              All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
              Meets or exceeds all requirements of ASME B30.26
              Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
              Look for the Red Pin°® . . . the mark of genuine Crosby quality.
              In stock (for delivery only)
               
              £17.19
              Inc VAT
              Add
              Screw Pin Anchor Shackle G209 - SWL: 6 1/2T, Size: 7/8'' (1 pc.)
              Capacities 1/3 to 55 metric tons, grade 6
              Forged - Quenched and Tempered, with alloy pins
              Working Load Limit and grade '6' permanently shown on every shackle
              Hot Dip galvanized or self coloured
              Sizes 3/8 inch and below are mechanically galvanized
              Fatigue rated
              Shackles 25t and larger are RFID EQUIPPED
              Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
              Approved for use at -40° C (-40° F) to 204° C (400° F).
              All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
              Meets or exceeds all requirements of ASME B30.26
              Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
              Look for the Red Pin°® . . . the mark of genuine Crosby quality.
              In stock (for delivery only)
               
              £23.81
              Inc VAT
              Add
              Screw Pin Anchor Shackle G209 - SWL: 8 1/2T, Size: 1'' (1 pc.)
              Capacities 1/3 to 55 metric tons, grade 6
              Forged - Quenched and Tempered, with alloy pins
              Working Load Limit and grade '6' permanently shown on every shackle
              Hot Dip galvanized or self coloured
              Sizes 3/8 inch and below are mechanically galvanized
              Fatigue rated
              Shackles 25t and larger are RFID EQUIPPED
              Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
              Approved for use at -40° C (-40° F) to 204° C (400° F).
              All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
              Meets or exceeds all requirements of ASME B30.26
              Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
              Look for the Red Pin°® . . . the mark of genuine Crosby quality.
              In stock (for delivery only)
               
              £32.48
              Inc VAT
              Add
              Screw Pin Anchor Shackle G209 - SWL: 9 1/2T, Size: 1 1/8'' (1 pc.)
              Capacities 1/3 to 55 metric tons, grade 6
              Forged - Quenched and Tempered, with alloy pins
              Working Load Limit and grade '6' permanently shown on every shackle
              Hot Dip galvanized or self coloured
              Sizes 3/8 inch and below are mechanically galvanized
              Fatigue rated
              Shackles 25t and larger are RFID EQUIPPED
              Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
              Approved for use at -40° C (-40° F) to 204° C (400° F).
              All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
              Meets or exceeds all requirements of ASME B30.26
              Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
              Look for the Red Pin°® . . . the mark of genuine Crosby quality.
              In stock (for delivery only)
               
              £46.16
              Inc VAT
              Add
              Screw Pin Anchor Shackle G209 - SWL: 12T, Size: 1 1/4'' (1 pc.)
              Capacities 1/3 to 55 metric tons, grade 6
              Forged - Quenched and Tempered, with alloy pins
              Working Load Limit and grade '6' permanently shown on every shackle
              Hot Dip galvanized or self coloured
              Sizes 3/8 inch and below are mechanically galvanized
              Fatigue rated
              Shackles 25t and larger are RFID EQUIPPED
              Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
              Approved for use at -40° C (-40° F) to 204° C (400° F).
              All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
              Meets or exceeds all requirements of ASME B30.26
              Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
              Look for the Red Pin°® . . . the mark of genuine Crosby quality.
              In stock (for delivery only)
               
              £69.46
              Inc VAT
              Add
              Screw Pin Anchor Shackle G209 - SWL: 17T, Size: 1 1/2'' (1 pc.)
              Capacities 1/3 to 55 metric tons, grade 6
              Forged - Quenched and Tempered, with alloy pins
              Working Load Limit and grade '6' permanently shown on every shackle
              Hot Dip galvanized or self coloured
              Sizes 3/8 inch and below are mechanically galvanized
              Fatigue rated
              Shackles 25t and larger are RFID EQUIPPED
              Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order.
              Approved for use at -40° C (-40° F) to 204° C (400° F).
              All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft/lbf) avg. at -20° C (-4° F) upon special request.
              Meets or exceeds all requirements of ASME B30.26
              Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for certification of Lifting Appliances available.
              Look for the Red Pin°® . . . the mark of genuine Crosby quality.
              In stock (for delivery only)
               
              £116.86
              Inc VAT
              Add
              < Previous 1 2 3 4 Next >
               
              Tractor parts described as suitable for original manufacturers on this site are Sparex branded tractor replacement parts and are not manufactured by the Original Equipment Manufacturer (OEM). Original Manufacturer’s names, part numbers and descriptions are quoted for reference purposes only and are not intended to indicate or suggest that our replacement parts are made by the OEM.