For application to nuts, bolts, pipework, keys, keyways & for all general assembly work where future dismantling is likely.
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Gasketing Product - multi-purpose flexible silicone sealant. Ideal for use on flexible flanges, machined or cast surfaces, metal or plastic. LOCTITE® SI 5926 is a multi-purpose flexible silicone sealant and cures on exposure to moisture in the air to form a tough rubber gasket. This product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Typical applications include valve covers, timing gear covers, differential covers, oil pans, transmission pans, water pumps, and thermostat housings. This product is typically used in applications with an operating temperature range of -54°C to 204°C. Multi-purpose flexible silicone sealant. Can be used on metal, plastic and painted parts Resists vibration, thermal expansion and contraction Operating temperature range of -54°C to +150°C.
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Resistant to a wide range of fluids including most fuels, oils and lubricants. Use on gaskets and metal surfaces. Temperature Range: -50 to 250°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Forms a tough, durable and flexible rubber seal. Replaces traditional gaskets. Resists most common automotive fluids (not fuel). Bonds to metal, glass, rubber, plastics and more. Temperature range: -50 to 250°C.
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Bondloc B243 is a medium strength, oil tolerant threadlocker designed for direct application onto ''as received parts'' where an oily film exists or where contamination is a problem. This product works on passive substrates like plated surfaces and stainless steel as well as active metals like brass and copper. Suitable for use with Diesel and Petrol. Colour: Blue Viscosity: 2,500 - 3,000cps Breakaway Strength on Steel: <special id="2430"/<>Greater Than 25Nm (IOS 10964) Prevail Torque: 5Nm Cure speed:Less than 15 mins @ 20°C Full Cure Time: 24 hours Min Max Temp: -55°C - +180°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Forms a tough, flexible gasket or seal that resists ageing, weathering and thermal cycling without hardening. Ideal for oil pans, transmission pans, differential covers, timing gears and valve covers. Suitable for sealing aluminium and metal ducting, refrigeration applications and hygiene seals. Colour : Black / Red Base : Acetoxy Viscosity : Paste Min Max Temp : -55°C - +350°C (Intermittent) Skinning Time : 5 mins 20°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Asbestos free. Eases assembly of joints. Excellent lubrication properties. Ensures gas-tight seal (no carbon monoxide leaks) Vibration resistant. Also suitable for flues and boiler pipes. Withstands 1000°c.
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Radiator Sealant - Stops coolant leaks in radiator, block, cylinder heads, core plugs etc. Inhibits rust & corrosion. Lubricates water pump. For cooling systems of up to 17 litres (3.7 Imp gallons). Used & recommended by motor manufacturers worldwide.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
J-B Adhesiveweld J-B Adhesive, the World's Strongest Bond, is a two-part epoxy resin that contains particles of iron and steel. Once set, it has properties similar to mild steel. J-B Adhesiveweld is a long term Permanent Repair Solution. Use it for sealing leaks in water pipes, petrol tanks, car batteries, cylinder heads, repair broken flanges on metal castings. Bond broken vehicle trim, both internal and external. Fix broken oven doors, kettles, fridge-freezers etc. Key Properties. Tensile strength 4000 psi. Temperature resistant to 300°C Workability Drill it, grind it, machine it, file it, tap it. Chemical resistance to Oil, Petrol, Diesel, Battery Acid, Salt Water. Bonds to any rigid surface Iron, Steel, Brass, Aluminium, Copper, Wood, Plastic, Glass, Fibre, Masonry.Working time 25 minutes. Setting time 4 hours. Full strength 16 hours. Shelf life once opened. 25 years Guaranteed.
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Gasketing Product - general purpose. Ideal for use on machined and rigid metal flanges LOCTITE® 574 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flanged connections. The nature of LOCTITE® 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance. Excellent water and glycol resistance Ideal for use on rigid metal parts, e.g. cast iron components and pump housings High oil resistance
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Thread Sealant - medium strength. For fine threads in hydraulic, pneumatic and general fittings. Fast curing. LOCTITE® 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The thixotropic nature of LOCTITE® 542 reduces the migration of liquid product after application to the part. Ideal for fine threads as used in hydraulic, pneumatic & general fittings Instant low-pressure seal Suitable for metal threads only Resistant to fuel, oil, coolants and hydraulic fluids Locks connection against vibration loosening DVGW approval (EN 751-1): NG-5146AR0855
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Bondloc B222 is a low strength threadlocker suitable for all threaded assemblies, particularly good for small fasteners and set screws. Designed for easy disassembly with hand tools, helps minimise and reduces loosening through vibrating assemblies. Ideal for low strength threadlocking on fragile alloys that could fracture during disassembly. Colour: Purple Viscosity: 900 - 1,500 cps Breakaway Strength:Less than 6Nm (ISO 10964) Prevail Torque: 4Nm Cure Speed:Less than 15mins @ 20°C with activator Full Cure Time: 12 hours @ 20°C Min Max Temp: -55°C - +150°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Bondloc B270 is a high strength threadlocker which prevents loosening against vibration when sealing of bolts, nuts and studs. Colour: Green Viscosity: 400 - 600cps Breakaway Strength on Steel: Greater Than 33Nm (ISO 10964) Prevail Torque: 39Nm Cure speed: 10 mins Full Cure Time: 12 hours Min Max Temp: -55°C - +180°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Bondloc B275 is high strength, high viscosity, thixotropic threadlocker that prevents loosening against vibration when used on various types of threads <special id="1643"/<>orM25. It works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. Can be disassembled by heating to 300°C. Contains a fluorescing additive to allow monitoring under UV light. Colour: Green Viscosity: 7,000cps Gap Fill: 0.2mm Breakaway Strength on Steel: Greater Than 25Nm (ISO 10964) Fixture Speed: Less than 10 mins - 6 hours with activator Full Cure Time: 24 hours Min Max Temp: -55°C - +150°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
BONDLOC® B495 Instant adhesive, Black (20gr). Suitable for bonding a range of materials including metals, plastics, elastomers, wood, paper, leather and fabric. Tensile strength 15 - 25Nmm². Fixture Time: Less than 5 seconds
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
B542 is a fast curing medium strength anaerobic sealant designed for the locking and sealing of metal pipes and fittings and helps prevents loosening and leakage due to shock and vibration. The product cures when confined in the absence of air between close-fitting metal surfaces. B542 is resistant to hydraulic fluids, oils, fuel and coolants. Ideal for threads, hydraulic and pneumatic fittings. Colour: Brown Viscosity: 400 - 800cps Breakaway Strength on Steel: Less than 15Nm (ISO 10964) Prevail Torque: 9Nm Max Thread Size: M36 Fixture Time: 10 - 20 mins Full Cure Time: 24 hours Min Max Temp: -55°C - +150°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Can be used on a variety of substrates including wood, concrete, stone, tiles, rubber, foam, metals, rigid plastic, polyethylene, canvas fabrics, cardboard, paper and cork. It is also ideal for fixing polyethylene sheets, thermal insulation and for packing applications such as palletising or case sealing. Colour : Clear Base : Synthetic Rubber or Resin Min Max Temp : -5°C - +80°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
BONDLOC® Superglue (3gr). General purpose glue for bonding most materials, such as wood, card, metal, rubber and plastic. Gives very high strength. Bonds on close fitting parts. Flash Point: 85°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Hylomar semi-hardening gasket joining compound Excellent at gap filling Resistant to steam and automotive fluids: petrol, oil, water and anti freeze Joints easily dismantled for service and repair Temperature range: 40 to 250°c
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
High strength, low viscosity, green, methacrylate-based threadlocking adhesive which fluoresces under UV light to allow monitoring. LOCTITE® 2701 is a green, low viscosity, methacrylate-based threadlocking adhesive with high strength, especially for chromated surfaces. Steel fixture time of 10 min, brass 4 min and stainless steel 25 min. Tolerates slight contaminations of industrial oils. Suitable for all metal fasteners. Fluoresces under UV light. Low viscosity Fluoresces to allow quality control and inspection High strength, especially for chromated surfaces Prevents unwanted movement, loosening, leaks and corrosion Resists vibration Seals threads - allows through-hole tapping
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
High strength, low viscosity, green, methacrylate-based threadlocking adhesive which fluoresces under UV light to allow monitoring. LOCTITE® 2701 is a green, low viscosity, methacrylate-based threadlocking adhesive with high strength, especially for chromated surfaces. Steel fixture time of 10 min, brass 4 min and stainless steel 25 min. Tolerates slight contaminations of industrial oils. Suitable for all metal fasteners. Fluoresces under UV light. Low viscosity Fluoresces to allow quality control and inspection High strength, especially for chromated surfaces Prevents unwanted movement, loosening, leaks and corrosion Resists vibration Seals threads - allows through-hole tapping
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
LOCTITE® 290 is a medium\high strength, wicking grade threadlocking adhesive that is ideal for locking preassembled fasteners. LOCTITE® 290 is a liquid medium to high-strength threadlocker designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need for disassembly prior to application. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The product can also fill porosities in welds, castings and powdered metal parts. Works on metal only Ideal for locking preassembled fasteners, e.g. instrumentation fasteners, electrical connectors and set screws Proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids Requires heat for disassembly
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
LOCTITE® 290 is a medium\high strength, wicking grade threadlocking adhesive that is ideal for locking preassembled fasteners. LOCTITE® 290 is a liquid medium to high-strength threadlocker designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need for disassembly prior to application. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The product can also fill porosities in welds, castings and powdered metal parts. Works on metal only Ideal for locking preassembled fasteners, e.g. instrumentation fasteners, electrical connectors and set screws Proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids Requires heat for disassembly
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
LOCTITE® 290 is a medium\high strength, wicking grade threadlocking adhesive that is ideal for locking preassembled fasteners. LOCTITE® 290 is a liquid medium to high-strength threadlocker designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need for disassembly prior to application. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The product can also fill porosities in welds, castings and powdered metal parts. Works on metal only Ideal for locking preassembled fasteners, e.g. instrumentation fasteners, electrical connectors and set screws Proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids Requires heat for disassembly
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
Threadlocking Adhesive - low strength. Easy disassembly. Suitable for all metal threaded assemblies. LOCTITE® 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids. Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses Especially suited to small thread sizes Permits disassembly with hand tools P1 NSF Reg. No.: 123002
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
Thread Sealant - low strength. Ideal for use on threaded plastic or plastic\metal fittings carrying hot or cold water. LOCTITE® SI 5331 is designed for the locking and sealing of plastic and metal fittings carrying hot or cold water, e.g. industrial and agricultural plastic water pipe systems or drainage systems. It carries certain approvals and certifications: WRC listed, meets BS 6920 for potable water: 0706521 DVGW approval, tested in accordance with EN 751-1; P1 NSF Reg. No.: 123620 General purpose liquid thread sealant for sealing metal and plastic threads in fittings carrying hot or cold water WRC listed, meets BS 6920 for potable water: 0706521 Locks connection against vibration-induced loosening P1 NSF Reg. No.: 123620 DVGW approval, tested in accordance with EN 751-1
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Medium strength gasketing product for machined metal flanges where semi-flexibility is required. LOCTITE® 5208 is a medium strength (6 N\mm² tensile shear strength), methacrylate-based gasketing product that offers semi-flexible capability. Intended for use with machined, rigid metal flanges, the product is suitable for gaps up to 0.125 mm and cures anaerobically. It is used typically as a form-in-place gasket on gearboxes and engine casings. Medium strength, semi-flexible Seals close fitting joints Designed for machined metal flanges
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
Medium strength gasketing product for machined metal flanges where semi-flexibility is required. LOCTITE® 5205 is a medium strength (3 N\mm² tensile shear strength), methacrylate-based gasketing product that offers semi-flexible capability. Intended for use with machined, rigid metal flanges, the product is suitable for gaps up to 0.25 mm and cures anaerobically. It is used typically as a form-in-place gasket on gearboxes and engine casings. Medium strength, semi-flexible For gaps up to 0.25 mm Designed for machined metal flanges Can be dispensed robotically
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
Retaining Compound - medium strength. If disassembly is required. Ideal for parts that need subsequent dismantling. LOCTITE® 641 is designed for the bonding of cylindrical fitting parts, particularly where disassembly is required for servicing operations. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings. Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
|