APPLICATIONS The tri-section pulling plate is the complementary tool to the three-armed pullers when the latter does not have sufficient grip. Universal, it is suitable for both the SCHP hydraulic extractor and the SCMP mechanical model.
ADVANTAGES The blades are placed behind the bearing, where the extraction force is most effective. The application of the effort on the inner ring minimises the risk of damaging the bearing while preserving the rolling body and the outer ring. The tri-section construction distributes the extraction force evenly, preventing the bearing from locking and/or tilting on the shaft during dismounting.
Shipping Costs...
|
|
Add
|
APPLICATIONS The tri-section pulling plate is the complementary tool to the three-armed pullers when the latter does not have sufficient grip. Universal, it is suitable for both the SCHP hydraulic extractor and the SCMP mechanical model.
ADVANTAGES The blades are placed behind the bearing, where the extraction force is most effective. The application of the effort on the inner ring minimises the risk of damaging the bearing while preserving the rolling body and the outer ring. The tri-section construction distributes the extraction force evenly, preventing the bearing from locking and/or tilting on the shaft during dismounting.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
APPLICATIONS This puller kit is specially adapted to carry out, without dismantling your machine, extractions of bearings that are difficult to access, such as: - Bearings housed in blind bearings, - Bearings installed on shafts, - Bearings with a tight fit on outer or inner rings. ADVANTAGES Practical and easy The kit contains 3 O-rings to facilitate the assembly of your tool. The marking of parts along with the selection table included enables a quick selection of accessories to be used. The visual user guide favours the correct implementation of the tool. Reliable and safe The design of tools enables successful and safe dismounting, without risk of jacking over and without forces. Each component is made of high quality steel, robust and resistant to impact, ensuring product longevity. Flexible The case includes 3 different sizes of shafts and 28 puller arms providing a very wide range of applications. The kit enables extraction of bearings of 10 to 100 mm bore diameter.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
NTN/SNR Portable induction heater Smart Temp (Small) The NTN-SNR bearing induction heaters are intended for heating rolling bearings. Other metal components forming a closed circuit such as bushings, shrink rings, pulleys and gears can also be heated. This will facilitate mounting where an interference fit is required. ADVANTAGES Small, light heater: weighs only 21 kg. Easy to use, ideal for working on site. Designed for all bearings and rotating parts with a bore diameter above 10 mm with a maximum diameter of 400 mm and a maximum weight of 50 kg.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Contains : Die for Fully Insulated Quick Disconnector (A2) Die for Italian Superseal Connector (H2) Die for Italian Superseal Connector (H3) Die for Deutsch DT Connector ( Stampe & Formed ) (K3) Die for Deutsch DT Connector ( Stampe & Formed ) (K4) Patented Quick Change Crimper
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Sparex Induction Heat Tool is ideal for loosing stubborn and seized bolt fixings. All-in-one: Comes with different diameters of coils to suit different nut sizes. Refill coils available to purchase separately. Supplied in robust lockable plastic case for easy storage and mobile use. Safe: no gas, no flame. Reduce risks of potential explosion by igniting fumes from workshop or vehicle. Wide applications: induction coils produce high frequency magnetic fields and ideal for accessing hard to reach areas, such as where axle bolts sit; this ensures heat is localized on the problem part only, not the surrounding area. Efficient: Coil can reach high heat temperatures in a short time, in seconds even; the heat expands the corroded nut and breaks down corrosive bonds. Save time & increase repair efficiency.
Shipping Costs...
|
|
Add
|
Contains: 3 pcs. Ø30mm, 2 pcs. Ø40mm & 1 pc. Ø50mm
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Contains: 2 x 650mm Flexible Coils
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Suitable for: Double Grip and Single Grip Terminals, use with cable 0.5mm to 6mm²
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Contains No. 1 - 1/8'' - 1/4'' (M3 - M6) No. 2 - 1/4'' - 5/16'' (M6 - M8) No. 3 - 5/16'' - 7/16'' (M8 - M11)) No. 4 - 7/16'' - 9/16'' (M11 - M14) No. 5 - 9/16'' - 3/4'' (M14 - M18)
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Shipping Costs...
|
|
Add
|
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Contains: 10 x 140, 12 x 150, 15 x 160, 19 x 180, 22 x 200 mm
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Contains 34 Tap & Die M3 x 0.5, M3 x 0.6, M4 x 0.7, M4 x 0.75, M5 x 0.8, M5 x 0.9, M6 x 0.75, M6 x 1.0, M7 x 0.75, M7 x 1.0, M8 x 1.0, M8 x 1.25, M10 x 1.25, M10 x 1.5, M12 x 1.25, M12 x 1.5, 1/8'' NPT-27 1 Die Stock Handle 1'' (25mm) O.D. 1 Tap Wrench M3~M12 1 T-Type Tap Wrench M3~M6 1 Screw Pitch Gauge 0.5, 0.6, 0.7, 0.75, 0.8, 0.9, 1.0, 1.25, 1.5, 1.75, 27, 28 1 Slotted Screwdriver 0.6 x 3mm L=93mm 1 Blow Case W 300 x D 230 x H 53mm
Shipping Costs...
|
|
Add
|
Specialty tools for repairs and reinforcements of broken, damaged, split plastic parts Quick and effective repair without destroying material unnecessarily Kit contains three different shapes and diameters of stainless steel staple Suitable for repairing non-heat-resistant plastic parts, such as bumpers, spoilers, lamp holders, rearview mirrors and etc. Contains : 100 Ø0.6 mm W Shape Staple 100 Ø0.8 mm W Shape Staple 100 Ø0.6 mm V Shape Staple
Shipping Costs...
|
|
Add
|
W Shape Suitable for: S.166800
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
W Shape Suitable for: S.166800
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
V Shape Suitable for: S.166800
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
BEAD BREAKER
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Manufactured from high carbon steel. Fully heat treated.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Manufactured from high carbon steel. Fully heat treated.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Chain Saw File - Ø3/16". Length: 8". Qty 2
Shipping Costs...
|
|
Add
|
No. 160-240 (To fit chains with a pitch from 11/2'' to 2'')
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Shipping Costs...
|
|
Add
|
|