We have the largest range of Tractor Parts, Accessories and Wearing Parts Online in the UK!
Type in what you are looking for and hit ENTER

Suggestions

              Home / Tractor Parts / Electrics / Domestic & Workshop Electrics / Electrical Testers 10 match(es)
              Electrical Testers

              Electrical Testers

              Malpasonline has all your maintenance, repair and restoration needs covered.

              Sparex branded Electrical Testers .
              Showing 1 - 10 of 10 items found, sorted by:
              12v Electrical Circuit Tester
              Allows easy tracing of electrical faults. All metal construction with steel probe. To verify isolated cables, unscrew the protective cap, earth the crocodile terminal and pierce the cable covering with the steel probe.
              DO NOT LEAVE UNDER LOAD FOR MORE THAN 30 SECONDS. *FOR USE ON 12V DC CIRCUITS ONLY.
              In stock (for delivery only)
               
              £7.46
              Inc VAT
              Add
              12v Electrical Circuit Tester
              DO NOT LEAVE UNDER LOAD FOR MORE THAN 30 SECONDS. *FOR USE ON 12V DC CIRCUITS ONLY.
              In stock (for delivery only)
               
              £8.17
              Inc VAT
              Add
              Digital Clamp Meter with Integrated Display
              AC/DC Current to 600A (ideal for automotive applications)
              AC/DC Voltage to 600V
              Resistance, temperature
              Continuity beeper and diode test
              Auto Power Off
              Comes in Carry Case
              Supplied with test leads
              Comes with Battery
              In stock (for delivery only)
               
              £176.81
              Inc VAT
              Add
              Electrical Voltage tester
              VAT VOLTAGE AND CONTINUITY TESTER:
              Voltage, continuity, polarity and phase tester with flashlight
              Large backlit LCD display with bargraph
              LCD AC/DC voltage indication: 6V, 12V, 24V, 50V, 120V, 230V, 400V, 690V
              Polarity detection shown on the LCD display
              Continuity test with audible tone
              Phase rotation test
              Integrated flashlight
              IP64 housing dust- & waterproof
              Overvoltage class CAT III 1000V / CAT IV 600V
              VAT self-test button
              In stock (for delivery only)
               
              £94.94
              Inc VAT
              Add
              Diagnostic test lead set
              Complete lead kit for Automotive diagnostics.
              Contains almost all connection leads for connecting to sensors, valves, connectors, injectors
              All leads are arranged properly in pairs ''Male & Female'' and by terminal sizes
              Includes ATC adapter Mini and Maxi fuses and ATC Current loop to be used with an Amp Clamp
              Includes Piercing Extra Sharp Probes. This innovative design gives enough retention force to pierce through the wire°€™s insulator
              New variable resistor of with 10KO (instead of 5KO ) dial indicator. Quick and easy way of resistance adjustment without the help of a multi-meter during simulation of resistance related sensing devices
              Airbags simulator : Used to confirm SRS Airbag power input by connecting it first to check for any short circuit before installing new SRS
              Replaceable resistors! 3 of 2 ohms - 2,2 ohms °€“ 2,7ohms
              LED Stroboscope: For checking series of terminals for correct wiring. Also for pulse or signal comparison between injectors. LED turns redfor reverse polarity. LED turns green for correct polarity
              Also includes general purpose components; Alligator clips, Banana plug to be used with multimeters, 3 ways extension plugs and detachable testprobes
              Ultra thin lead for multipins connector
              In stock (for delivery only)
               
              £328.32
              Inc VAT
              Add
              Needle test probe set
              This kit of high quality test leads has been designed for the automotive technician.
              Each kit includes:
              A pair of double-insulated silicone test leads, terminated on one side by an insulated straight connector, and on the other by a sheathed right-angle connector, both compatible with standard 4mm connectors
              A pair of spades for intrusive measurements, ideal when the inverted test is not an option -> category: 30V
              A pair of flexible measuring needles that allow you to pass through the rubber seal on some connectors without damaging it
              Test leads can withstand high temperatures (example: exhaust manifolds or soldering iron tip) -> category: 1000V CAT II
              In stock (for delivery only)
               
              £28.34
              Inc VAT
              Add
              Multimeter
              Specially designed for all automotive applications
              Functions:
              Voltage : AC (3,2V - 1000V) DC (3,2V - 750V)
              Current : AC (32mA - 10A) DC (32mA - 300mA)
              Resistance from 320O to 320KO
              Frequency from 0,01Hz to 32kHz
              Diode check
              RPM from 0 to 12,000
              Temp. measurement (-20°C - +1370°C)
              Automatically turns off after 10 min
              Accessories: test and temperature probes, test clamps, inductive clamp for tachometer
              In stock (for delivery only)
               
              £172.14
              Inc VAT
              Add
              Digital multimeter
              Measures:
              Voltage DC : 600V
              Voltage AC : 600V
              Current DC : 10A
              Current AC : 10A
              Resistance : 20MO
              Diode check : test current of 1mA maximum, open circuit voltage 2.8V DC typical
              Continuity test : audible signal will sound if the resistance is less than approximately 30O
              Temperature: from -20°C to 760°C
              In stock (for delivery only)
               
              £53.16
              Inc VAT
              Add
              Scope & Multi Tester
              Specially designed for automotive electrical circuit°€™s trouble shooting from 0 to 50 Volts
              Easy and simple to use.
              No extensive electrical knowledge needed
              Fully protected.
              Measures:
              •Amps draw (Mini, ATC or Maxi) without removing the fuses from the Fuse Box.
              •Voltage (max. 50VDC)
              •Cranking Volts with auto HOLD function (12/24 Volts)
              •Resistance [Ohms] (from 0.0 O up to 1.0 MO)
              •Frequency from 0 to 20 KHz, peak to peak volts on the same display and Duty Cycle (%)
              •Continuity test
              •Diode/ LED test
              CE Approved
              Ideal for Bus Can electrical systems.
              Screen colour coding.
              Requires x3 AA batteries.
              Batteries not included.
              In stock (for delivery only)
               
              £220.59
              Inc VAT
              Add
              Heavy Duty Circuit Tester
              Suitable for testing circuits from 6V to 24V.
              Polycarbonate handle.
              Steel contact probe.
              1.5m heavy duty lead fitted with crocodile clip.
              In stock (for delivery only)
               
              £16.21
              Inc VAT
              Add
               
              Tractor parts described as suitable for original manufacturers on this site are Sparex branded tractor replacement parts and are not manufactured by the Original Equipment Manufacturer (OEM). Original Manufacturer’s names, part numbers and descriptions are quoted for reference purposes only and are not intended to indicate or suggest that our replacement parts are made by the OEM.