USE AND OPERATION
These valves are used to open or close oil flow in a circuit even at high pressure. MATERIALS AND FEATURES Body: zinc-plated steel. Internal ports: ground and chromium-plated steel. Seals: BUNA N standard. Leakage: does not allow leakage. Fixing holes: (CODE\FF) CONNECTIONS Connect indifferently A or P to the ports where flow has to be isolated. Flow is blocked with lever at 90° (position 1) and free with lever in line (position 2).
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION
These valves are used to open or close oil flow in a circuit even at high pressure. MATERIALS AND FEATURES Body: zinc-plated steel. Internal ports: ground and chromium-plated steel. Seals: BUNA N standard. Leakage: does not allow leakage. Fixing holes: (CODE\FF) CONNECTIONS Connect indifferently A or P to the ports where flow has to be isolated. Flow is blocked with lever at 90° (position 1) and free with lever in line (position 2).
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION These valves are used to divert the inlet flaw towards 2 alternative ports (L scheme). MATERIALS AND FEATURES Body: zinc-plated steel. Internal parts: ground and chromium-plated steel. Seals: BUNA N standard. Leakage: does not allow leakage. Fixing holes: (CODE\FF) CONNECTIONS Connect P to the pressure flow, A and B to the circuit ports where the flow has to be diverted to. With the lever at 90° flow is connected in port A (position 1), with lever in line flow is connected in port B (position 2)
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Electrical connector to operate the solenoid.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION 3 way diverter valves used to divert the flow towards two different outlets. MATERIALS AND FEATURES Body: cast iron. Internal parts: hardened and ground steel. Seals: BUNA N standard. Leakage: Minimal leakage. Oil temperature: 50° C - Oil viscosity: 30 cSt CONNECTIONS Connect P to the supply, A and B to the ports of the hydraulic circuit where flow has to be diverted to. With lever in position 1 the flow is connected towards port A; with lever in position 2, the flow is connected towards port B. With lever in central position ports P, A and B are all connected (open centre)
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION 3 way diverter valves used to divert the flow towards two different outlets. MATERIALS AND FEATURES Body: cast iron. Internal parts: hardened and ground steel. Seals: BUNA N standard. Leakage: Minimal leakage. Oil temperature: 50° C - Oil viscosity: 30 cSt CONNECTIONS Connect P to the supply, A and B to the ports of the hydraulic circuit where flow has to be diverted to. With lever in position 1 the flow is connected towards port A; with lever in position 2, the flow is connected towards port B. With lever in central position ports P, A and B are all connected (open centre)
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION 3 way diverter valves used to divert the flow towards two different outlets. MATERIALS AND FEATURES Body: cast iron. Internal parts: hardened and ground steel. Seals: BUNA N standard. Leakage: Minimal leakage. Oil temperature: 50° C - Oil viscosity: 30 cSt CONNECTIONS Connect P to the supply, A and B to the ports of the hydraulic circuit where flow has to be diverted to. With lever in position 1 the flow is connected towards port A; with lever in position 2, the flow is connected towards port B. With lever in central position ports P, A and B are all connected (open centre)
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION 3 way diverter valves used to divert the flow towards two different outlets. MATERIALS AND FEATURES Body: cast iron. Internal parts: hardened and ground steel. Seals: BUNA N standard. Leakage: Minimal leakage. Oil temperature: 50° C - Oil viscosity: 30 cSt CONNECTIONS Connect P to the supply, A and B to the ports of the hydraulic circuit where flow has to be diverted to. With lever in position 1 the flow is connected towards port A; with lever in position 2, the flow is connected towards port B. With lever in central position ports P, A and B are all connected (open centre)
Shipping Costs...
|
|
Add
|
USE AND OPERATION This valve is made up by two 3-way diverter valves coupled together: each of the two valves is used to divert the inlet flow towards two ports. A single lever controls both sections at the same time. Ideal to control two cylinders. MATERIALS AND FEATURES Body: cast iron. Internal parts: hardened and ground steel. Seals: BUNA N standard. Leakage: Minimal leakage. CONNECTIONS Connect P and P to the 2 pressure flows, ports A and B to the first cylinder and ports A and B to the second cylinder. With lever in position 1, P is connected to A and P to A With lever in position 2, P is connected to B and P to B With lever in the central position all ports are connected to each other (open centre)
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION This valve is made up by two 3-way diverter valves coupled together: each of the two valves is used to divert the inlet flow towards two ports. A single lever controls both sections at the same time. Ideal to control two cylinders. MATERIALS AND FEATURES Body: cast iron. Internal parts: hardened and ground steel. Seals: BUNA N standard. Leakage: Minimal leakage. CONNECTIONS Connect P and P to the 2 pressure flows, ports A and B to the first cylinder and ports A and B to the second cylinder. With lever in position 1, P is connected to A and P to A With lever in position 2, P is connected to B and P to B With lever in the central position all ports are connected to each other (open centre)
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION
These valves are used to open or close oil flow in a circuit even at high pressure. MATERIALS AND FEATURES Body: zinc-plated steel. Internal ports: ground and chromium-plated steel. Seals: BUNA N standard. Leakage: does not allow leakage. Fixing holes: (CODE\FF) CONNECTIONS Connect indifferently A or P to the ports where flow has to be isolated. Flow is blocked with lever at 90° (position 1) and free with lever in line (position 2).
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION
These valves are used to open or close oil flow in a circuit even at high pressure. MATERIALS AND FEATURES Body: zinc-plated steel. Internal ports: ground and chromium-plated steel. Seals: BUNA N standard. Leakage: does not allow leakage. Fixing holes: (CODE\FF) CONNECTIONS Connect indifferently A or P to the ports where flow has to be isolated. Flow is blocked with lever at 90° (position 1) and free with lever in line (position 2).
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION These valves are used to divert the inlet flaw towards 2 alternative ports (L scheme). MATERIALS AND FEATURES Body: zinc-plated steel. Internal parts: ground and chromium-plated steel. Seals: BUNA N standard. Leakage: does not allow leakage. Fixing holes: (CODE\FF) CONNECTIONS Connect P to the pressure flow, A and B to the circuit ports where the flow has to be diverted to. With the lever at 90° flow is connected in port A (position 1), with lever in line flow is connected in port B (position 2)
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION These valves are used to divert the inlet flaw towards 2 alternative ports (L scheme). MATERIALS AND FEATURES Body: zinc-plated steel. Internal parts: ground and chromium-plated steel. Seals: BUNA N standard. Leakage: does not allow leakage. Fixing holes: (CODE\FF) CONNECTIONS Connect P to the pressure flow, A and B to the circuit ports where the flow has to be diverted to. With the lever at 90° flow is connected in port A (position 1), with lever in line flow is connected in port B (position 2)
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION These valves are used to divert the inlet flaw towards 2 alternative ports (L scheme). MATERIALS AND FEATURES Body: zinc-plated steel. Internal parts: ground and chromium-plated steel. Seals: BUNA N standard. Leakage: does not allow leakage. Fixing holes: (CODE\FF) CONNECTIONS Connect P to the pressure flow, A and B to the circuit ports where the flow has to be diverted to. With the lever at 90° flow is connected in port A (position 1), with lever in line flow is connected in port B (position 2)
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Flow Rate Max. pressure (bar)
Shipping Costs...
|
|
Add
|
Flow Rate Max. pressure (bar)
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Diverter Valve - 1/2" BSP
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Flow Rate Max. pressure (bar)
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Commonly used as a 3rd service on a tractor front loader allowing you to use a grab function.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Commonly used as a 3rd service on a tractor front loader allowing you to use a grab function.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION These valves are used to open or close oil flow in a circuit even at high pressure. MATERIALS AND FEATURES Body: zinc-plated steel. Internal ports: ground and chromium-plated steel. Seals: BUNA N standard. Leakage: does not allow leakage. Fixing holes: (CODE\FF) CONNECTIONS Connect indifferently A or P to the ports where flow has to be isolated. Flow is blocked with lever at 90° (position 1) and free with lever in line (position 2)
Shipping Costs...
|
|
Add
|
USE AND OPERATION These valves are used to open or close oil flow in a circuit even at high pressure. MATERIALS AND FEATURES Body: zinc-plated steel. Internal ports: ground and chromium-plated steel. Seals: BUNA N standard. Leakage: does not allow leakage. Fixing holes: (CODE\FF) CONNECTIONS Connect indifferently A or P to the ports where flow has to be isolated. Flow is blocked with lever at 90° (position 1) and free with lever in line (position 2)
Shipping Costs...
|
|
Add
|
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION These valves are used to open or close oil flow in a circuit even at high pressure. MATERIALS AND FEATURES Body: zinc-plated steel. Internal ports: ground and chromium-plated steel. Seals: BUNA N standard. Leakage: does not allow leakage. Fixing holes: (CODE\FF) CONNECTIONS Connect indifferently A or P to the ports where flow has to be isolated. Flow is blocked with lever at 90° (position 1) and free with lever in line (position 2)
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION These valves are used to open or close oil flow in a circuit even at high pressure. MATERIALS AND FEATURES Body: zinc-plated steel. Internal ports: ground and chromium-plated steel. Seals: BUNA N standard. Leakage: does not allow leakage. Fixing holes: (CODE\FF) CONNECTIONS Connect indifferently A or P to the ports where flow has to be isolated. Flow is blocked with lever at 90° (position 1) and free with lever in line (position 2)
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION These valves are used to open or close oil flow in a circuit even at high pressure. MATERIALS AND FEATURES Body: zinc-plated steel. Internal ports: ground and chromium-plated steel. Seals: BUNA N standard. Leakage: does not allow leakage. Fixing holes: (CODE\FF) CONNECTIONS Connect indifferently A or P to the ports where flow has to be isolated. Flow is blocked with lever at 90° (position 1) and free with lever in line (position 2)
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Rotary Valve - 4 port closed centre - double acting. Ports = 1/2" BSP. Flow Rate = 15 gpm (60 ltrs.). Max Pressure = 3000 psi (210kg/cm²). Pressure Drop = 50psi (9kg/cm²). Finish = Black Body. Spool and Handle Plated
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
|