Allows easy tracing of electrical faults. All metal construction with steel probe. To verify isolated cables, unscrew the protective cap, earth the crocodile terminal and pierce the cable covering with the steel probe.
DO NOT LEAVE UNDER LOAD FOR MORE THAN 30 SECONDS. *FOR USE ON 12V DC CIRCUITS ONLY.
In stock (for delivery only)
 Shipping Costs...
|
|
Add
|
Allows easy tracing of electrical faults. All metal construction with steel probe. To verify isolated cables, unscrew the protective cap, earth the crocodile terminal and pierce the cable covering with the steel probe.
DO NOT LEAVE UNDER LOAD FOR MORE THAN 30 SECONDS. *FOR USE ON 12V DC CIRCUITS ONLY.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
AC/DC Current to 600A (ideal for automotive applications)
AC/DC Voltage to 600V
Resistance, temperature
Continuity beeper and diode test
Auto Power Off
Comes in Carry Case
Supplied with test leads
Comes with Battery
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
VAT VOLTAGE AND CONTINUITY TESTER:
Voltage, continuity, polarity and phase tester with flashlight
Large backlit LCD display with bargraph
LCD AC/DC voltage indication: 6V, 12V, 24V, 50V, 120V, 230V, 400V, 690V
Polarity detection shown on the LCD display
Continuity test with audible tone
Phase rotation test
Integrated flashlight
IP64 housing dust- & waterproof
Overvoltage class CAT III 1000V / CAT IV 600V
VAT self-test button
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Complete lead kit for Automotive diagnostics.
Contains almost all connection leads for connecting to sensors, valves, connectors, injectors
All leads are arranged properly in pairs ''Male & Female'' and by terminal sizes
Includes ATC adapter Mini and Maxi fuses and ATC Current loop to be used with an Amp Clamp
Includes Piercing Extra Sharp Probes. This innovative design gives enough retention force to pierce through the wire’s insulator
New variable resistor of with 10KΩ (instead of 5KΩ ) dial indicator. Quick and easy way of resistance adjustment without the help of a multi-meter during simulation of resistance related sensing devices
Airbags simulator : Used to confirm SRS Airbag power input by connecting it first to check for any short circuit before installing new SRS
Replaceable resistors! 3 of 2 ohms - 2,2 ohms - 2,7ohms
LED Stroboscope: For checking series of terminals for correct wiring. Also for pulse or signal comparison between injectors. LED turns redfor reverse polarity. LED turns green for correct polarity
Also includes general purpose components; Alligator clips, Banana plug to be used with multimeters, 3 ways extension plugs and detachable testprobes
Ultra thin lead for multipins connector
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
This kit of high quality test leads has been designed for the automotive technician.
Each kit includes:
A pair of double-insulated silicone test leads, terminated on one side by an insulated straight connector, and on the other by a sheathed right-angle connector, both compatible with standard 4mm connectors
A pair of spades for intrusive measurements, ideal when the inverted test is not an option -> category: 30V
A pair of flexible measuring needles that allow you to pass through the rubber seal on some connectors without damaging it
Test leads can withstand high temperatures (example: exhaust manifolds or soldering iron tip) -> category: 1000V CAT II
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Specially designed for all automotive applications
Functions:
Voltage : AC (3,2V - 1000V) DC (3,2V - 750V)
Current : AC (32mA - 10A) DC (32mA - 300mA)
Resistance from 320Ω to 320KΩ
Frequency from 0,01Hz to 32kHz
Diode check
RPM from 0 to 12,000
Temp. measurement (-20°C - +1370°C)
Automatically turns off after 10 min
Accessories: test and temperature probes, test clamps, inductive clamp for tachometer
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Measures:
Voltage DC : 600V
Voltage AC : 600V
Current DC : 10A
Current AC : 10A
Resistance : 20MΩ
Diode check : test current of 1mA maximum, open circuit voltage 2.8V DC typical
Continuity test : audible signal will sound if the resistance is less than approximately 30Ω
Temperature: from -20°C to 760°C
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Specially designed for automotive electrical circuit’s trouble shooting from 0 to 50 Volts
Easy and simple to use.
No extensive electrical knowledge needed
Fully protected.
Measures:• Amps draw (Mini, ATC or Maxi) without removing the fuses from the Fuse Box.• Voltage (max. 50VDC)• Cranking Volts with auto HOLD function (12/24 Volts)• Resistance [Ohms] (from 0.0 Ω up to 1.0 MΩ)• Frequency from 0 to 20 KHz, peak to peak volts on the same display and Duty Cycle (%)• Continuity test• Diode/ LED test
CE Approved
Ideal for CanBus electrical systems.
Screen colour coding.
Requires x3 AA batteries.
Batteries not included.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Suitable for testing circuits from 6V to 24V.
Polycarbonate handle.
Steel contact probe.
1.5m heavy duty lead fitted with crocodile clip.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|