In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION These valves are used to control the cylinder movements and block it in both directions. In order to have the descent of a load under control and avoid the load's weight being carried away the valve will prevent any cavitation of the cylinder. Type "A" is different due to the connection positions and the pilot ratio. MATERIALS AND FEATURES Body: zinc plated steel. Internal parts: hardened and ground steel. Seals: BUNA N standard Leakage: negligible leakage. Standard setting: 320 Bar. Oil temperature: 50° C - Oil viscosity: 30 cSt Valve setting must be at least 1.3 times more than load pressure in order to enable the valve to close even when undergone to maximum load pressure CONNECTIONS Connect V1 and V2 to the supply, Cl and C2 to the cylinder to be controlled. In-line mounted.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION These valves are used to control the cylinder movements and block it in both directions. In order to have the descent of a load under control and avoid the load's weight being carried away the valve will prevent any cavitation of the cylinder. Type "A" is different due to the connection positions and the pilot ratio. MATERIALS AND FEATURES Body: zinc plated steel. Internal parts: hardened and ground steel. Seals: BUNA N standard Leakage: negligible leakage. Standard setting: 320 Bar. Oil temperature: 50° C - Oil viscosity: 30 cSt Valve setting must be at least 1.3 times more than load pressure in order to enable the valve to close even when undergone to maximum load pressure CONNECTIONS Connect V1 and V2 to the supply, Cl and C2 to the cylinder to be controlled. In-line mounted.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION These valves are used to adjust speed of cylinders in one direction; flow is free in the reverse. Pressure compensation is not provided, flow rate depends on pressure and oil viscosity. These valves are characterised by a high adjustment accuracy. MATERIALS AND FEATURES Body: zinc-plated steel. Internal parts: hardened and ground steel. Seals: BUNA N standard. Leakage control - needle type, Minimal leakage when the valve is dosed. Oil temperature: 50C - Oil viscosity: 30 cSt CONNECTIONS Connect V to the supply and C to the cylinder to control; flow is adjust from C to V and is free in the reverse direction. When used on cylinders with double pilot check valves, the valve has to be mounted between the cylinder and the double pilot check valve. Flow adjustment is done by rotating the plastic hand knob after loosening the side locking screw. This particular configuration allows an accurate adjustment.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION These valves are used to adjust speed of cylinders in one direction; flow is free in the reverse. Pressure compensation is not provided, flow rate depends on pressure and oil viscosity. These valves are characterised by a high adjustment accuracy. MATERIALS AND FEATURES Body: zinc-plated steel. Internal parts: hardened and ground steel. Seals: BUNA N standard. Leakage control - needle type, Minimal leakage when the valve is dosed. Oil temperature: 50C - Oil viscosity: 30 cSt CONNECTIONS Connect V to the supply and C to the cylinder to control; flow is adjust from C to V and is free in the reverse direction. When used on cylinders with double pilot check valves, the valve has to be mounted between the cylinder and the double pilot check valve. Flow adjustment is done by rotating the plastic hand knob after loosening the side locking screw. This particular configuration allows an accurate adjustment.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION These valves are used to adjust speed of cylinders in one direction; flow is free in the reverse. Pressure compensation is not provided, flow rate depends on pressure and oil viscosity. These valves are characterised by a high adjustment accuracy. MATERIALS AND FEATURES Body: zinc-plated steel. Internal parts: hardened and ground steel. Seals: BUNA N standard. Leakage control - needle type, Minimal leakage when the valve is dosed. Oil temperature: 50C - Oil viscosity: 30 cSt CONNECTIONS Connect V to the supply and C to the cylinder to control; flow is adjust from C to V and is free in the reverse direction. When used on cylinders with double pilot check valves, the valve has to be mounted between the cylinder and the double pilot check valve. Flow adjustment is done by rotating the plastic hand knob after loosening the side locking screw. This particular configuration allows an accurate adjustment.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION These valves are used to control the cylinder movements and block it in both directions. In order to have the descent of a load under control and avoid the load's weight being carried away the valve will prevent any cavitation of the cylinder. Type "A" is different due to the connection positions and the pilot ratio. MATERIALS AND FEATURES Body: zinc plated steel. Internal parts: hardened and ground steel. Seals: BUNA N standard Leakage: negligible leakage. Standard setting: 320 Bar. Oil temperature: 50° C - Oil viscosity: 30 cSt Valve setting must be at least 1.3 times more than load pressure in order to enable the valve to close even when undergone to maximum load pressure CONNECTIONS Connect V1 and V2 to the supply, Cl and C2 to the cylinder to be controlled. In-line mounted.
Shipping Costs...
|
|
Add
|
USE AND OPERATION This valve enables to keep the flow to P constant to a required setting, independent of pressure or inlet flow. Excess flow is drained to T (tank). MATERIALS AND FEATURES Body: zinc-plated steel. Internal parts: hardened and ground steel. Seals: BUNA N standard. Load holding: matched diameters, minimal leakage (few drops per minute). Oil temperature: 50 ° C - Oil viscosity: 30 cSt CONNECTIONS Connect E to the supply and P to the cylinder or to a line of a hydraulic circuit where flow control is needed. Connect T to the tank. To adjust flow setting rotate the hand knob after loosening the locking nut.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION This valve enables to keep the flow to P constant to a required setting, independent of pressure or inlet flow. Excess flow is drained in B and it is available For a second function. Port B is insensitive to pressure changes but not to flow changes. MATERIALS AND FEATURES Body: zinc-plated steel. Internal parts: hardened and ground steel. Seals: BUNA N standard. Load holding: matched diameters, minimal leakage (few drops per minute). Oil temperature: 50° C - Oil viscosity: 30 cSt CONNECTIONS Connect E lo the supply and P to the cylinder or to a line of a hydraulic circuit where flow control is needed. Connect B to the tank or to a second cylinder. To adjust flow setting rotate the hand knob after loosening the locking nut.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION This valve enables to keep the flow to P constant to a required setting, independent of pressure or inlet flow. Excess flow is drained to T (tank). MATERIALS AND FEATURES Body: zinc-plated steel. Internal parts: hardened and ground steel. Seals: BUNA N standard. Load holding: matched diameters, minimal leakage (few drops per minute). Oil temperature: 50 ° C - Oil viscosity: 30 cSt CONNECTIONS Connect E to the supply and P to the cylinder or to a line of a hydraulic circuit where flow control is needed. Connect T to the tank. To adjust flow setting rotate the hand knob after loosening the locking nut.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION These valves are used to control the cylinder movements and block it in both directions. In order to have the descent of a load under control and avoid the load's weight being carried away the valve will prevent any cavitation of the cylinder. Type "A" is different due to the connection positions and the pilot ratio. MATERIALS AND FEATURES Body: zinc plated steel. Internal parts: hardened and ground steel. Seals: BUNA N standard Leakage: negligible leakage. Standard setting: 320 Bar. Oil temperature: 50° C - Oil viscosity: 30 cSt Valve setting must be at least 1.3 times more than load pressure in order to enable the valve to close even when undergone to maximum load pressure CONNECTIONS Connect V1 and V2 to the supply, Cl and C2 to the cylinder to be controlled. In-line mounted.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION These valves are used to adjust speed of cylinders in one direction; flow is free in the reverse. Pressure compensation is not provided, flow rate depends on pressure and oil viscosity. These valves are characterised by a high adjustment accuracy. MATERIALS AND FEATURES Body: zinc-plated steel. Internal parts: hardened and ground steel. Seals: BUNA N standard. Leakage control - needle type, Minimal leakage when the valve is dosed. Oil temperature: 50C - Oil viscosity: 30 cSt CONNECTIONS Connect V to the supply and C to the cylinder to control; flow is adjust from C to V and is free in the reverse direction. When used on cylinders with double pilot check valves, the valve has to be mounted between the cylinder and the double pilot check valve. Flow adjustment is done by rotating the plastic hand knob after loosening the side locking screw. This particular configuration allows an accurate adjustment.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION This valve enables to keep the flow to P constant to a required setting, independent of pressure or inlet flow. Excess flow is drained to T (tank). MATERIALS AND FEATURES Body: zinc-plated steel. Internal parts: hardened and ground steel. Seals: BUNA N standard. Load holding: matched diameters, minimal leakage (few drops per minute). Oil temperature: 50 ° C - Oil viscosity: 30 cSt CONNECTIONS Connect E to the supply and P to the cylinder or to a line of a hydraulic circuit where flow control is needed. Connect T to the tank. To adjust flow setting rotate the hand knob after loosening the locking nut.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION This valve enables to keep the flow to P constant to a required setting, independent of pressure or inlet flow. Excess flow is drained in B and it is available For a second function. Port B is insensitive to pressure changes but not to flow changes. MATERIALS AND FEATURES Body: zinc-plated steel. Internal parts: hardened and ground steel. Seals: BUNA N standard. Load holding: matched diameters, minimal leakage (few drops per minute). Oil temperature: 50° C - Oil viscosity: 30 cSt CONNECTIONS Connect E lo the supply and P to the cylinder or to a line of a hydraulic circuit where flow control is needed. Connect B to the tank or to a second cylinder. To adjust flow setting rotate the hand knob after loosening the locking nut.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION This valve enables to keep the flow to P constant to a required setting, independent of pressure or inlet flow. Excess flow is drained in B and it is available For a second function. Port B is insensitive to pressure changes but not to flow changes. MATERIALS AND FEATURES Body: zinc-plated steel. Internal parts: hardened and ground steel. Seals: BUNA N standard. Load holding: matched diameters, minimal leakage (few drops per minute). Oil temperature: 50° C - Oil viscosity: 30 cSt CONNECTIONS Connect E lo the supply and P to the cylinder or to a line of a hydraulic circuit where flow control is needed. Connect B to the tank or to a second cylinder. To adjust flow setting rotate the hand knob after loosening the locking nut.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION These valves are used when two equal cylinder, that are not mechanically coupled, supplied by the same pump and controlled by a single valve, must move simultaneously both in extension and retraction. MATERIALS AND FEATURES Body: zinc-plated steel. Internal parts: hardened and ground steel. Seals: BUNA N standard. Load holding: matched diameters, minimal leakage. Cylinder stroke error tolerance of ±3% of maximum flow. Any synchronisation errors are compensated for at the end of stroke. CONNECTIONS Connect P to supply flow and A and B to the cylinders.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION These valves are used when two equal cylinder, that are not mechanically coupled, supplied by the same pump and controlled by a single valve, must move simultaneously both in extension and retraction. MATERIALS AND FEATURES Body: zinc-plated steel. Internal parts: hardened and ground steel. Seals: BUNA N standard. Load holding: matched diameters, minimal leakage. Cylinder stroke error tolerance of ±3% of maximum flow. Any synchronisation errors are compensated for at the end of stroke. CONNECTIONS Connect P to supply flow and A and B to the cylinders.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION These valves are used when two equal cylinder, that are not mechanically coupled, supplied by the same pump and controlled by a single valve, must move simultaneously both in extension and retraction. MATERIALS AND FEATURES Body: zinc-plated steel. Internal parts: hardened and ground steel. Seals: BUNA N standard. Load holding: matched diameters, minimal leakage. Cylinder stroke error tolerance of ±3% of maximum flow. Any synchronisation errors are compensated for at the end of stroke. CONNECTIONS Connect P to supply flow and A and B to the cylinders.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
USE AND OPERATION These valves are used when two equal cylinder, that are not mechanically coupled, supplied by the same pump and controlled by a single valve, must move simultaneously both in extension and retraction. MATERIALS AND FEATURES Body: zinc-plated steel. Internal parts: hardened and ground steel. Seals: BUNA N standard. Load holding: matched diameters, minimal leakage. Cylinder stroke error tolerance of ±3% of maximum flow. Any synchronisation errors are compensated for at the end of stroke. CONNECTIONS Connect P to supply flow and A and B to the cylinders.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|