Gas Welding Goggles with Ø50mm lense
Shade Density: 5
Fully adjustable headband
 Shipping Costs...
|
|
Add
|
Shipping Costs...
|
|
Add
|
Shipping Costs...
|
|
Add
|
Shipping Costs...
|
|
Add
|
Shipping Costs...
|
|
Add
|
MIG Conical Nozzle
(Suitable for M15 Lance).
Shipping Costs...
|
|
Add
|
Strong powerful magnetic welding aid for ferrous metals
Holds work in position for welding soldering & assembling on flat or round bar
Can hold work piece at various angles 45° 90° & 135°
Shipping Costs...
|
|
Add
|
Shipping Costs...
|
|
Add
|
Shipping Costs...
|
|
Add
|
Shipping Costs...
|
|
Add
|
Shipping Costs...
|
|
Add
|
Fitted with two cable securing screws
Complies with the standard H.D.362 B-type
400 Amp
Shipping Costs...
|
|
Add
|
Shade Density : 5
Fully adjustable Headband
Flip front Gas Welding Goggle with Ø50mm lenses
Shipping Costs...
|
|
Add
|
Contains: S.11639 x 1 pc.
Shipping Costs...
|
|
Add
|
Shade Density : 5
Fully adjustable Headband
Flip front Gas Welding Goggle with Ø50mm lenses
Shipping Costs...
|
|
Add
|
Shipping Costs...
|
|
Add
|
Shipping Costs...
|
(per 5)
|
Add
Min.(Qty)
5
|
No 220V = no risk associated with the current.
30W: high power for a small device.
Unlike gas soldering irons, this does not involve any flame. Fire is not permitted in garages for obvious safety reasons.
No adjustment as with gas irons.
No ordering and shipping of gas (speaking logistically, shipping gas is problematic. e.g. by plane)
No cable. Very mobile with a high run time.
Precision tip for fine solders (connectors, etc.)
Universal tip for soldering cables (e.g: cabling a trailer hitch)
Tip for heat-shrink sheaths: Does not come into contact with the sheath so it doesn't melt it.
Its heating speed makes work easier: No need to heat the iron 10-15 minutes before starting work. Here it heats up in 10-15 SECONDS.
Case remains cold throughout the operation.
Warm-up time: 10-15 seconds
Runtime: 35 min real
Can also be used connected to the mains (charging)
Lithium Battery = 500-700 charge cycles
Shipping Costs...
|
|
Add
|
Anti - Spatter Welding Spray 300ml. Solvent free spray prolongs tip and shroud life. Prevents the adhesion of weld spatter to the surrounding area. Best replacement for DCM solvent based aerosol, vegetable oil based highly effective.
Shipping Costs...
|
|
Add
|
M15 MIG lance complete with 3 metre lead and Euro fitting
Shipping Costs...
|
|
Add
|
MIG Swan Neck (Suitable for M15 Lance).
Shipping Costs...
|
|
Add
|
MIG Nozzle Spring
(Suitable for M15 Lance).
Shipping Costs...
|
|
Add
|
MIG Cylindrical Nozzle
(Suitable for M15 Lance).
Shipping Costs...
|
|
Add
|
MIG Taper Nozzle
(Suitable for M15 Lance).
Shipping Costs...
|
|
Add
|
MIG Contact Tip (ECU M6 x 25mm) - 0.6mm wire
Shipping Costs...
|
|
Add
|
MIG Contact Tip (ECU M6 x 25mm) - 0.8mm wire
Shipping Costs...
|
|
Add
|
MIG Contact Tip (ECU M6 x 25mm) - 0.9mm wire
Shipping Costs...
|
|
Add
|
MIG Contact Tip (ECU M6 x 25mm) - 1.0mm wire
Shipping Costs...
|
|
Add
|
MIG Contact Tip (ECU M6 x 25mm) - 1.2mm wire
Shipping Costs...
|
|
Add
|
MIG Liner Steel. 0.6mm - 0.9mm wire (3m)
Shipping Costs...
|
|
Add
|
|
|