We have the largest range of Tractor Parts, Accessories and Wearing Parts Online in the UK!
Type in what you are looking for and hit ENTER

Suggestions

              • Home
              • Find Tractor Parts by Make/Model

              Find Zetor CRYSTAL 8011 Parts by Category…

               (View all Zetor CRYSTAL 8011 tractor parts)
              Listed below are all the tractor replacement parts categories which have parts that are compatible with your application.

              Search by Zetor Make/Model

              Looking for Zetor CRYSTAL 8011 Parts? 

              (select another make)
              e.g. "Water Pump" or simply leave blank to see all parts for selected Make/Model
              Search

              Zetor CRYSTAL 8011 Parts Categories

              Zetor CRYSTAL 8011 Parts Categories

              Axles & Power Train...

              Wheel Bearing Kit 2 Wheel Drive Bearings & Kits Internal Circlip, 90mm (DIN | Standard No. DIN 472) AS2060 Wedge Belt - SPA Section - Belt No. SPA1232 Drive Belts Metric Rotary Shaft Seal, 90 x 110 x 13mm Double Lip Seals for 4WD Axle Hubs
              Sparex Thrust Ball Bearing (51109) 2WD Axle Spindle Bearings Brake Master Cylinder Repair Kit. Brake Cylinder Seal Kits Hydraulic Pump Hydraulic Pumps Cone Wheel Nut, M14x1.5 Tractor Wheel Nuts
              Track Rod, Length: 130mm 2WD Track Rods & Drag Links Brake Friction Disc. OD 230mm Brake Discs Sparex Clutch Release Bearing Release Bearings Wheel Stud M14 x 1.5 x 46mm (Metric) Grip Ø: 16.5mm Tractor Wheel Studs
              Internal Circlip, 90mm (DIN | Standard No. DIN 472) APL2045 Deutz Brake Fluid Reservoir Caps. Brake Fluid Reservoirs & Parts Hydraulic Connector Repair Kits & Seals Raw Edge Moulded Cogged Belt - AVX Section - Belt No. AVX13x1025 AVX Section Drive Belts
              Internal Circlip, 90mm (DIN | Standard No. DIN 472) APL2060 Brake Lining Kit Disc, OD 230mm. Brake Linings & Kits Metric Rotary Shaft Seal, 90 x 110 x 13mm Double Lip Rotary Shaft Seals Wedge Belt - SPA Section - Belt No. SPA1232 SPA Section Drive Belts
              Internal Circlip, 90mm (DIN | Standard No. DIN 472) AS2045 Brake Master Cylinder for Zetor | (975032) Brake Master Cylinders & Components

              Bearings...

              Sparex Deep Groove Ball Bearing (63042RS) Deep Groove Bearings Sparex Taper Roller Bearing (30216) Taper Roller Bearings Sparex Thrust Ball Bearing (51109) Thrust Bearings

              Cabin & Body Panels...

              Decal Set - Zetor 8011 Tractor Body Decals & Emblems Glazing Rubber - S Type Tractor Cab Draught Excluders & Seals Fuel Tank Mounting Bush Tractor Cab Mount Bushes Wiper Blade - 14'' (350mm) 1 pc. + S.14730 Tractor Wiper Blades

              Engine & Filters...

              Raw Edge Moulded Cogged Belt - AVX Section - Belt No. AVX13x1025 AVX Section Drive Belts Oil Filter - Spin On Engine Oil Filters Fuel Tank Mounting Bush Fuel Tanks Wedge Belt - SPA Section - Belt No. SPA1232 SPA Section Drive Belts
              Bottom Hose, Inner Ø of Hose Smaller End: 36mm, Inner Ø of Hose Bigger End: 36mm Bottom Radiator Hoses Metric Rotary Shaft Seal, 90 x 110 x 13mm Double Lip Engine Oil Seals Hydraulic Filter - Spin On - HF6159 Hydraulic & Transmission Oil Filters Top Hose, Inner Ø of Hose Smaller End: 38mm, Inner Ø of Hose Bigger End: 46mm Top Radiator Hoses
              Top Gasket Set - 4 Cyl. Cylinder Head Gaskets Thermostat Gasket Engine Thermostat Gaskets Inlet Valve Inlet Engine Valves Raw Edge Moulded Cogged Belt - AVX Section - Belt No. AVX13x1025 Tractor Drive Belts
              Core Plug - 30mm (Dished Type - Mild Steel) Engine Block Core Plugs Exhaust Manifold Gasket Exhaust & Manifold Gaskets O Ring 2.5 x 21mm 70 Shore O Rings Thermostat Tractor Engine Thermostats
              Conrod Bearing +0.010'' (0.25mm) Pair Engine Connecting Rod Bearings Exhaust Manifold Gasket Exhaust & Manifold Gaskets O Ring 2.5 x 21mm 70 Shore O Rings - Metric O Rings & Accessories Radiator Cap Tractor Radiator Caps
              Oil Seal Engine Crankshaft Seals Fuel Filter - Element Fuel Filters Metric Rotary Shaft Seal, 52 x 72 x 12mm Oil Seals - Imperial Oil Seals Silencer - Vertical Tractor Silencers
              Fuel Tap Engine Fuel Taps Fuel Primer Pump for Zetor | (00933260, 93009209, 930626, 933260, 93-3260) Fuel Hand Pumps Metric Rotary Shaft Seal, 90 x 110 x 13mm Double Lip Oil Seals - Rotary Shaft Oil Seals Water Pump Assembly Water Pump Assemblies
              Top Gasket Set - 4 Cyl. Engine Head Gasket Sets Fuel Primer Pump for Zetor | (00933260, 93009209, 930626, 933260, 93-3260) Fuel Pumps Fuel Filler Filter Sediment Filters Water Pump Seal Water Pump Seals

              Hydraulics...

              Hydraulic Blanking Plug Adaptor M16 x 1.5 Metric Blanking Plugs

              Lighting & Electrical Accessories...

              Alternator (Sparex) - 14V, 55 Amps Complete Alternator Units Ignition Switch Ignition Switches & Components Starter Motor - 12V, 3Kw (Sparex) Starter Motors Water Temperature Gauge, Temperature range Temperature Gauges
              Battery Cut Off Switch - Standard Duty, 100 Amps, 12-24V (Agripak) Cut-Off Switches Starter Button Push Pull Switches

              Machinery Parts...

              Metric Setscrew, M8x25mm (DIN 933) Tensile strength: 8.8. Overflow Slurry Tanker Valves

              PTO & Linkage...

              Metric Setscrew, M8x20mm (DIN 933) Tensile strength: 8.8. Scharmüller Trailer Hitch Components

              Towing & Fasteners...

              Metric Hexagon Nut, M14x1.50mm (DIN 934) Metric Fine Assorted Nuts Metric Flat Washer, ID: 8mm, OD: 16mm, Thickness: 1.6mm (DIN | Standard No. DIN 125A) Flat Washers Metric Setscrew, M6x20mm (DIN 933) Tensile strength: 8.8. Metric Metric Roll Pin, Pin Ø6mm x 30mm Roll Pins
              Metric Roll Pin, Pin Ø6mm x 30mm Assorted Roll & Spirol Pins Internal Circlip, 25mm (DIN | Standard No. DIN 472) Internal & External Locking Circlips Metric Hexagon Nut, M10x1.50mm (DIN 934) Metric Coarse Metric Metric Roll Pin, Pin Ø6mm x 30mm Roll Pins - Metric
              Imperial Spring Washer, ID: 5/16'' (DIN | Standard No. DIN 127B) Assorted Washers Metric Bolt M8x50mm (DIN 931) Loose Bolts - Metric - Coarse 8.8 Bolts & Screw Sets Metric Bolt, M16x120mm (DIN 960) Metric Fine Metric Setscrew, M6x20mm (DIN 933) Tensile strength: 8.8. Setscrews
              Metric Bolt M8x50mm (DIN 931) Bolts Metric Bolt, M16x120mm (DIN 960) Loose Bolts - Metric - Fine 8.8 Bolts & Screw Sets Metric Hexagon Nut, M14x1.50mm (DIN 934) Metric Fine Metric Fine Imperial Spring Washer, ID: 3/8'' (DIN | Standard No. DIN 127B) Spring Washers
              Imperial Copper Washers, ID: 3/8'' x OD: 25/32'' x Thickness: 1/16'' Copper - Imperial Washers Metric Setscrew, M6x20mm (DIN 933) Tensile strength: 8.8. Loose Setscrews - Metric - Coarse 8.8 Bolts & Screw Sets Metric Parallel Key, Dimension: 6mm x 6mm x 25mm (DIN | Standard No. DIN 6885A) Parallel Keys Metric Woodruff Key 6 x 10mm (DIN | Standard No.DIN 6888) Woodruff Keys
              Metric Copper Washer, ID: 14 x OD: 20 x Thickness: 1.5mm Copper - Metric Washers Metric Bolt M8x50mm (DIN 931) Metric

              Workshop & Merchandising...

              Compressor Hose Air & Water Hoses Grease Nipple - M10 x 1.00, 0° Grease Nipples

              Gallery: Tractor Parts and Accessories for Zetor CRYSTAL 8011

              Fuel Filter - Element Hydraulic Filter - Spin On - HF6159 Oil Filter - Spin On Radiator Cap Metric Rotary Shaft Seal, 90 x 110 x 13mm Double Lip Silencer - Vertical Cone Wheel Nut, M14x1.5 Wheel Stud M14 x 1.5 x 46mm (Metric) Grip Ø: 16.5mm Brake Fluid Reservoir Caps. Brake Master Cylinder Repair Kit. Brake Friction Disc. OD 230mm Brake Lining Kit Disc, OD 230mm. Brake Master Cylinder for Zetor | (975032) Glazing Rubber - S Type Fuel Tank Mounting Bush Wiper Blade - 14'' (350mm) 1 pc. + S.14730 Decal Set - Zetor 8011 Imperial Spring Washer, ID: 5/16'' (DIN | Standard No. DIN 127B) Metric Hexagon Nut, M14x1.50mm (DIN 934) Metric Fine Metric Roll Pin, Pin Ø6mm x 30mm Top Hose, Inner Ø of Hose Smaller End: 38mm, Inner Ø of Hose Bigger End: 46mm Bottom Hose, Inner Ø of Hose Smaller End: 36mm, Inner Ø of Hose Bigger End: 36mm Thermostat Thermostat Gasket Water Pump Assembly Water Pump Seal Core Plug - 30mm (Dished Type - Mild Steel) Oil Seal Top Gasket Set - 4 Cyl. Top Gasket Set - 4 Cyl. Exhaust Manifold Gasket Fuel Primer Pump for Zetor | (00933260, 93009209, 930626, 933260, 93-3260) Fuel Primer Pump for Zetor | (00933260, 93009209, 930626, 933260, 93-3260) Exhaust Manifold Gasket Track Rod, Length: 130mm Sparex Clutch Release Bearing Alternator (Sparex) - 14V, 55 Amps Starter Motor - 12V, 3Kw (Sparex) Metric Parallel Key, Dimension: 6mm x 6mm x 25mm (DIN | Standard No. DIN 6885A) Metric Woodruff Key 6 x 10mm (DIN | Standard No.DIN 6888) Internal Circlip, 25mm (DIN | Standard No. DIN 472) Metric Roll Pin, Pin Ø6mm x 30mm Compressor Hose Grease Nipple - M10 x 1.00, 0° Metric Setscrew, M8x25mm (DIN 933) Tensile strength: 8.8. Inlet Valve Conrod Bearing +0.010'' (0.25mm) Pair Wheel Bearing Kit Sparex Thrust Ball Bearing (51109) Metric Rotary Shaft Seal, 90 x 110 x 13mm Double Lip Water Temperature Gauge, Temperature range O Ring 2.5 x 21mm 70 Shore Raw Edge Moulded Cogged Belt - AVX Section - Belt No. AVX13x1025 Fuel Tank Mounting Bush Fuel Filler Filter Fuel Tap Metric Setscrew, M8x20mm (DIN 933) Tensile strength: 8.8. Starter Button Ignition Switch Battery Cut Off Switch - Standard Duty, 100 Amps, 12-24V (Agripak) Wedge Belt - SPA Section - Belt No. SPA1232 Metric Rotary Shaft Seal, 90 x 110 x 13mm Double Lip Sparex Deep Groove Ball Bearing (63042RS) Sparex Taper Roller Bearing (30216) Sparex Thrust Ball Bearing (51109) Hydraulic Connector Hydraulic Pump Metric Roll Pin, Pin Ø6mm x 30mm Metric Bolt M8x50mm (DIN 931) Metric Setscrew, M6x20mm (DIN 933) Tensile strength: 8.8. Metric Bolt, M16x120mm (DIN 960) Metric Bolt M8x50mm (DIN 931) Metric Setscrew, M6x20mm (DIN 933) Tensile strength: 8.8. Metric Hexagon Nut, M14x1.50mm (DIN 934) Metric Fine Metric Hexagon Nut, M10x1.50mm (DIN 934) Metric Coarse Internal Circlip, 90mm (DIN | Standard No. DIN 472) Internal Circlip, 90mm (DIN | Standard No. DIN 472) Internal Circlip, 90mm (DIN | Standard No. DIN 472) Internal Circlip, 90mm (DIN | Standard No. DIN 472) Hydraulic Blanking Plug Adaptor M16 x 1.5 Imperial Spring Washer, ID: 3/8'' (DIN | Standard No. DIN 127B) Metric Flat Washer, ID: 8mm, OD: 16mm, Thickness: 1.6mm (DIN | Standard No. DIN 125A) Imperial Copper Washers, ID: 3/8'' x OD: 25/32'' x Thickness: 1/16'' Metric Copper Washer, ID: 14 x OD: 20 x Thickness: 1.5mm Metric Bolt M8x50mm (DIN 931) Metric Bolt, M16x120mm (DIN 960) Metric Setscrew, M6x20mm (DIN 933) Tensile strength: 8.8. Raw Edge Moulded Cogged Belt - AVX Section - Belt No. AVX13x1025 Wedge Belt - SPA Section - Belt No. SPA1232 O Ring 2.5 x 21mm 70 Shore Metric Rotary Shaft Seal, 90 x 110 x 13mm Double Lip Metric Rotary Shaft Seal, 52 x 72 x 12mm Raw Edge Moulded Cogged Belt - AVX Section - Belt No. AVX13x1025 Wedge Belt - SPA Section - Belt No. SPA1232

              Zetor

              Zetor Forterra 9641 tractor, Atherton Old Hall Farm 1

              Now exporting to over 43 countries worldwide, the European manufacturer Zetor started out making tractors in Brno, Czech Republic in 1946. The brand name was derived from the logo of Zbrojovka Brno arms factory ‘ZET’ and the last 2 letters of the word ‘Tractor’ forming ‘ZETOR’. After the production of their first tractor, the Z25, ZETOR continued to develop advanced 4-cyclinder diesel engines with fuel injection and factory built cabs. Due to the low production costs and good reliability, ZETOR tractors became a popular choice throughout the global market where they have a well known brand delivering low cost tractors.

              Quick Links.

              Product Highlights

              Account Information

              Legal Information

              Tractor parts described as suitable for original manufacturers on this site are Sparex branded tractor replacement parts and are not manufactured by the Original Equipment Manufacturer (OEM). Original Manufacturer’s names, part numbers and descriptions are quoted for reference purposes only and are not intended to indicate or suggest that our replacement parts are made by the OEM.
              Copyright 2020 Malpas Tractors Ltd, Curvica Ltd.
              Malpas Tractors Ltd is a company registered in England & Wales with number 2057260