Suitable for: Pressure Washing Emptying of water tanks Small scale spraying of non-corrosive chemicals etc Supplied with: 3m Inlet hose (Ø30mm) 9.5m delivery hose (Ø19mm) Washing Jet Suction filter Hose Clips. Self Priming
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
The 'Supa Mover' Drum Pump Fast and efficient portable Dispensing Pump. Can be used with most types of barrels or container. Suitable for oils, paraffin, anti freeze or similar non corrosive liquids. For drums up to 205 Litre capacity Output 0.5 Litres/Stroke Fittings 3/4'' BSP & 2 1/4'' UNF Tube length 87cm
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Automatic shut off nozzle 60 litres per minute 1m inlet hose with filter, 90° elbow & hose tail Consists of: Pump with meter 3m outlet hose Manual trigger nozzle swivel & hose tail
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Connect a hose to the outlet nozzle and immerse the complete pump in liquid. Connect the battery clips to the battery terminals (+) positive to (+) positive and (-) negative to (-) negative (if powering from a vehicle battery do not use with the engine running). The pump will deliver immediately. For an in-line installation unclip the filter to expose the inlet nozzle, connect length of hose between the tank and nozzle. The pump must be fitted below the tank. Avoid dry running for long periods. For drinking water applications sterilise regularly. Store away from excessive heat and direct sunlight to avoid external damage. If the pump fails to perform, check for blockages (including filters), leaks and correct hose & electrical connections. Pumps fresh and sea water. Rapid diesel refuelling and transfer with no spillage (NOT suitable for Petrol). Bilge pump-out in tight areas. Water Transfer; Deck showers; Deck, Anchor & general Wash-down. Robust, slim line with clip-on easily cleaned filter.
Shipping Costs...
|
|
Add
|
Connect a hose to the outlet nozzle and immerse the complete pump in liquid. Connect the battery clips to the battery terminals (+) positive to (+) positive and (-) negative to (-) negative (if powering from a vehicle battery do not use with the engine running). The pump will deliver immediately. For an in-line installation unclip the filter to expose the inlet nozzle, connect length of hose between the tank and nozzle. The pump must be fitted below the tank. Avoid dry running for long periods. For drinking water applications sterilise regularly. Store away from excessive heat and direct sunlight to avoid external damage. If the pump fails to perform, check for blockages (including filters), leaks and correct hose & electrical connections. Pumps fresh and sea water. Rapid diesel refuelling and transfer with no spillage (NOT suitable for Petrol). Bilge pump-out in tight areas. Water Transfer; Deck showers; Deck, Anchor & general Wash-down. Robust, slim line with clip-on easily cleaned filter.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
APPLICATIONS: Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles. Suitable for pumping water with low levels of sandy impurities. Especially used in domestic water supply installations. Suitable for small farms and gardening, small scale industrial services and where self priming is necessary.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
APPLICATIONS: Stainless steel centrifugal submersible pump with microcast ring impeller, suitable for draining clean waste water, sandy water, muddy water with solid particles of sizes up to 10 mm without fibres. Suitable for residential applications and for construction sites, also in case of unexpected flooding.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
APPLICATIONS: The submersible pump of the NOVA range is suitable for automatically operated fixed domestic applications for draining basements and garages that are subject to flooding.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
APPLICATIONS: Stainless steel submersible centrifugal pump with microcast steel liquid vortex impeller, suitable for lifting sewage and drain water in general containing solid matter with size up to 50 mm.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Shipping Costs...
|
|
Add
|
For dispensing Diesel, Kerosene, Heating Oils, Engine Oil, Lubrication Oils (up to SAE90) and other non-corrosive fluids Suitable for 50L to 205L barrels Barrel fitting Ø: 2'' 12 rotations/gallon (4.5 litres) Suction tube I/D: 29mm Outlet pipe: Ø19mm (3/4'').
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Connect a hose to the outlet nozzle and immerse the complete pump in liquid. Connect the battery clips to the battery terminals (+) positive to (+) positive and (-) negative to (-) negative (if powering from a vehicle battery do not use with the engine running). The pump will deliver immediately. For an in-line installation unclip the filter to expose the inlet nozzle, connect length of hose between the tank and nozzle. The pump must be fitted below the tank. Avoid dry running for long periods. For drinking water applications sterilise regularly. Store away from excessive heat and direct sunlight to avoid external damage. If the pump fails to perform, check for blockages (including filters), leaks and correct hose & electrical connections. Pumps fresh and sea water. Rapid diesel refuelling and transfer with no spillage (NOT suitable for Petrol). Bilge pump-out in tight areas. Water Transfer; Deck showers; Deck, Anchor & general Wash-down. Robust, slim line with clip-on easily cleaned filter.
Shipping Costs...
|
|
Add
|
Connect a hose to the outlet nozzle and immerse the complete pump in liquid. Connect the battery clips to the battery terminals (+) positive to (+) positive and (-) negative to (-) negative (if powering from a vehicle battery do not use with the engine running). The pump will deliver immediately. For an in-line installation unclip the filter to expose the inlet nozzle, connect length of hose between the tank and nozzle. The pump must be fitted below the tank. Avoid dry running for long periods. For drinking water applications sterilise regularly. Store away from excessive heat and direct sunlight to avoid external damage. If the pump fails to perform, check for blockages (including filters), leaks and correct hose & electrical connections. Pumps fresh and sea water. Rapid diesel refuelling and transfer with no spillage (NOT suitable for Petrol). Bilge pump-out in tight areas. Water Transfer; Deck showers; Deck, Anchor & general Wash-down. Robust, slim line with clip-on easily cleaned filter.
Shipping Costs...
|
|
Add
|
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Specification: For 200L up to 1000L container Axial wheel pump with manual pump assembly GB-plug, 2 m cable Illuminated on/off switch Motor with thermal protection switch, self resetting Siphon protection acc. to WHG (German government regulation for environmental care), continuously active Discharge hose, 4m, DN 19, G 1''male, G 1''female Polypropylene nozzle valve, ZVPP. Suction hose, 1,6m, with filter Barrel screw coupling, G 2''male Valuable sales package Special notes: The pump is lightweight and very quiet in operation. Resistant against small dirt particles in the liquid to be discharged The liquid column is to be established via manual pumping Can be manually operated in case of electric power blackout.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Suitable for S.25457 Handpump
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Clean and easy to use, an oil change without removing the sump plug Automatically extracts liquid after several pumps Automatic cut-out, cannot overfill Easy disposal of fluids No AC/DC power requirement Three sizes of extracting tubes for fitting into dipstick hole Capacity: 6.5 litres
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Designed to pump a full range of engine and gear oils which are contained in steel or plastic 20/25 litre containers. Steel nozzle to fit directly into vehicle gearbox or transmission
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Self Priming 2 metres of battery cable with clips. Built in bypass for diesel transfer. On/Off switch. Carry Handle. 4 metres of hose. Nozzle. Filter (Replacement S.27829). Flow rate: 12V = 25L per minute, 24V = 45L per minute
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Suitable for petrol, paraffin, diesel, insecticides, distilled water, detergents etc.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Suitable for petrol, paraffin, diesel, insecticides, distilled water, detergents etc.
Shipping Costs...
|
(per 2)
|
Add
Min.(Qty)
2
|
Connect a hose to the outlet nozzle and immerse the complete pump in liquid. Connect the battery clips to the battery terminals (+) positive to (+) positive and (-) negative to (-) negative (if powering from a vehicle battery do not use with the engine running). The pump will deliver immediately. For an in-line installation unclip the filter to expose the inlet nozzle, connect length of hose between the tank and nozzle. The pump must be fitted below the tank. Avoid dry running for long periods. For drinking water applications sterilise regularly. Store away from excessive heat and direct sunlight to avoid external damage. If the pump fails to perform, check for blockages (including filters), leaks and correct hose & electrical connections. Pumps fresh and sea water. Rapid diesel refuelling and transfer with no spillage (NOT suitable for Petrol). Bilge pump-out in tight areas. Water Transfer; Deck showers; Deck, Anchor & general Wash-down. Robust, slim line with clip-on easily cleaned filter.
Shipping Costs...
|
|
Add
|
Instantly self-priming. 220V-240V electric pump. Double insulated. Suitable for continuous running. Built-in overload protector. Suitable for all types of water. Built-in float switch.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Not self-priming Built in bypass for diesel transfer Flow rate: 40 litres per minute On/off switch Carry handle consists of: 4m hose, 2m battery cable with clips, nozzle & filter
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Suitable for 50-205 litre drums 2 metres flexible corrugated PVC discharge hose, 19mm (3/4'') I.D. Use with high viscosity oils, chemicals, Adblue, water based media, detergents, antifreeze, windshield washer, hydraulic oils, herbicides etc. Fitted with anti-siphon vent Flow rate: 500 ml / stroke Supplied with S.43604 Adaptor
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Suitable for 205 litres / 45 gallon drums Use with lacquers, thinners, AdBlue, antifreeze, brake clean, detergents, glycerine, water, weed killer, mild acids etc
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
A rugged transfer pump designed for use with gear oils to get them both into and out of gearboxes, transfer cases & differentials 500ml (16oz) capacity T Handle Suitable for non-corrosive liquids 300mm flexible vinyl hose Powder coated steel barrel.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Connect a hose to the outlet nozzle and immerse the complete pump in liquid. Connect the battery clips to the battery terminals (+) positive to (+) positive and (-) negative to (-) negative (if powering from a vehicle battery do not use with the engine running). The pump will deliver immediately. For an in-line installation unclip the filter to expose the inlet nozzle, connect length of hose between the tank and nozzle. The pump must be fitted below the tank. Avoid dry running for long periods. For drinking water applications sterilise regularly. Store away from excessive heat and direct sunlight to avoid external damage. If the pump fails to perform, check for blockages (including filters), leaks and correct hose & electrical connections. Pumps fresh and sea water. Rapid diesel refuelling and transfer with no spillage (NOT suitable for Petrol). Bilge pump-out in tight areas. Water Transfer; Deck showers; Deck, Anchor & general Wash-down. Robust, slim line with clip-on easily cleaned filter.
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
Current (Amps at 12V): 7 -11 F.P.M. (Gallons/Litres): 4.3/16.3 Hose I.D. 19mm Shut off pressure PSI: 50 Liquid temperature: 4° to 52° C Head: 3m
In stock (for delivery only)
Shipping Costs...
|
|
Add
|
|