Bondloc B603 is a high strength anaerobic retaining compound suitable for permanent bonds. B603 is oil tolerant and works well on parts that have not been cleaned or have a oil residue on them. The product cures when confined in the absence of air between close-fitting metal surfaces. Ideal for all types of cylindrical parts, such as bearings, gears, splines, pulleys and keyways. Colour: Green Viscosity: 100 - 150cps Gap Fill: 0.15mm Static Strength on Steel: Less than 22Nmm2 (ISO 4587) Full Cure Time: 24 hours Fixture Time:Less than 15 mins @ 20°C Min Max Temp: -55°C - +150°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Bondloc B603 is a high strength anaerobic retaining compound suitable for permanent bonds. B603 is oil tolerant and works well on parts that have not been cleaned or have a oil residue on them. The product cures when confined in the absence of air between close-fitting metal surfaces. Ideal for all types of cylindrical parts, such as bearings, gears, splines, pulleys and keyways. Colour: Green Viscosity: 100 - 150cps Gap Fill: 0.15mm Static Strength on Steel: Less than 22Nmm2 (ISO 4587) Full Cure Time: 24 hours Fixture Time:Less than 15 mins @ 20°C Min Max Temp: -55°C - +150°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Bondloc B638 is a high strength retaining compound designed for the bonding of cylindrical fitting parts, with bond gaps approaching 0.2mm. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It also has good oil tolerance to minor surface contaminants. Ideal for shafts, gears, pulleys and similar cylindrical parts. Colour: Green Viscosity: 2,000 - 3,000cps Gap Fill: 0.2mm Static Strength on Steel: <special id="2430"/<>Greater Than 25Nmm2 (ISO 4587) Fixture Time: Less than 5 mins with activator Full Cure Time: 24 hours Min Max Temp: -55°C - +180°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Bondloc B641 is a medium strength retaining compound, it cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. Designed for the bonding of cylindrical fitting parts where disassembly is required for servicing and repair operations. Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings. Colour: Yellow Viscosity: 400 - 800cps Gap Fill: 0.1mm Static Strength on Steel: Greater Than 6Nmm2 (ISO 4587) Fixture Time: Less than 5 mins with activator Full Cure Time: 12 hours Min Max Temp: -55°C - +150°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Bondloc B648 is a low viscosity, high strength retaining compound, it cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening due to shock and vibration. Designed for the bonding of cylindrical fitting parts where a high temperature resistance is required. Tolerates minor surface contaminations from various oils and protection fluids. Typical applications include fixing gears or sprockets onto gearbox shafts and rotors on electric motor shafts. Colour: Green Viscosity: 400 - 600cps Gap Fill: 0.15mm Static Strength on Steel: Greater Than 26Nmm2 (ISO 4587) Fixture Time: Less than 5 mins with activator Full Cure Time: 2 - 6 hours Min Max Temp: -55°C - +180°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Bondloc B660 is a high strength retaining compound designed for the bonding of cylindrical fitting parts. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. Bondloc B660 has excellent gap fill characteristics and enables the re-use of worn parts including Keys, splines and bearing seats. Colour: Silver Grey Viscosity: Paste Gap Fill: 0.5mm Static Strength on Steel: Greater Than 18Nmm2 (ISO 4597) Fixture Time: Less than 5 mins with activator Full Cure Time: 2 - 6 hours Min Max Temp: -55°C - +150°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
A steel-filled epoxy putty for general maintenance and repairs. For filling, rebuilding and bonding metal surfaces. Can be sanded, drilled and painted once cured. Colour : Grey Viscosity : Putty Full Cure : 24 hrs Sandable : 20 mins
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Fast and permanent repairs to most plastic surfaces. Ideal for emergencies. Colour : Light Blue Viscosity : Putty Full Cure : 24 hrs Sandable : 20 mins
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Epoxy resin suitable for bonding a wide variety of surfaces including steel, aluminium, and galvanised iron. Product reacts within a few minutes to give a tough resilient bond. Mix Ratio : 1:1 Colour : Clear Viscosity : Viscous Liquid Tensile Strength (Steel) : 3.8Nmm2 Working Time :Less than 3 mins Fixture Time : Less than 5 mins
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
A steel-filled epoxy putty for general maintenance and repairs. Can be used to repair worn or fatigued metals, patch castings, making jigs and fixtures, rebuild pumps and valve bodies. Mix Ratio : 1:1 Colour : Grey Viscosity : 50,000 - 75,000cps Tensile Strength (Steel) : 14-18Nmm2 Working Time : Less than 4 mins Fixture Time : Less than7 mins
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Non-cracking formulation ideal for engine gaskets, cylinder heads, water pumps, gear boxes, threaded assemblies, flanges and pipe joints. Colour : Blue Base : Solvent Viscosity : 5,000cps Gap Fill : 0.5mm
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Can be used on all types of engine components withstanding constant temperatures up to 270°C and intermittent temperatures up to 350°C. Colour : Red Base : Solvent Viscosity : 6,500cps Gap Fill : 0.5mm
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Forms a tough, flexible gasket or seal that resists ageing, weathering and thermal cycling without hardening. Ideal for oil pans, transmission pans, differential covers, timing gears and valve covers. Suitable for sealing aluminium and metal ducting, refrigeration applications and hygiene seals. Colour : Black / Red Base : Acetoxy Viscosity : Paste Min Max Temp : -55°C - +350°C (Intermittent) Skinning Time : 5 mins 20°C
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
A powerful blend of non-chlorinated and dichloromethane free solvents, designed to remove most types of paints, surface coatings and worn gaskets eliminating excess scarping. The viscous gel formula clings to vertical surfaces, helping to prevent run-off. It is particularly suitable for aluminium or other soft metal flanges where scraping could lead to surface damage. Where to use: Removing paints varnishes and lacquers prior to refinishing, including 2-Pack, Acrylic, Cellulose, Vinyl, Alkyd and Polyurethane Removing worn gaskets from rocker box covers, water pumps, manifold etc Removing charred oil residues from engine components Removing rubber residues from wheel hubs prior to fitting new or repaired tyres
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
BONDLOC® BCA brushable Superglue (5gr). Suitable for bonding metals, plastics, wood, ceramics, rubber, leather card, glass and many other materials. Flash Point : 85°C. Fixture Time: Less than 5 seconds.
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
BONDLOC® Get A Grip Adhesive (310ml). High strength adhesive which eliminates the need for nails & screws in many DIY and repair jobs. Bonds wood, plastic, brick, metal, glass, ceramics & plaster. Fills minor gaps in uneven surfaces. The high viscosity of this product allows non sagging bonding for light elements. Service temperature range: -10°C - +70°C. Flash Point: Less than 20°C.
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
BONDLOC® NC Silicone Sealant, Grey (310ml) Specified by Ransomes to replace the Dana wheel and Gasket A815531 for T series tractor, motor 213D as the gasket is no longer available.
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
BONDLOC® PU Primer 25ml. For use with WSPU
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
New glazing kit for simple replacement of windscreens. Contains: Cleaner for paint & glass, primer & sealant, applicator, cleaning cloth and full instructions
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
BONDLOC® Windscreen PU Sealant (310ml). Fast, direct glazing sealant.
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
BONDLOC® RTV1 Acetoxy Silicone adhesive (80ml). Fleixible Silicone Rubber that bonds, fills & seals permanently. Can be used on all glazing and industrial work along with common building and construction joints. Also suitable for use on a wide range of substrates including metal, wood, painted metals, glass, PVC, polycarbonate, polyacrylate and many others. Service temperature range: -40°C - +150°C. Skinning Time: 5 mins 20°C.
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
BONDLOC® RTV Silicone, Black (310ml). Flexible silicone rubber that bonds, fills and seals permanently and can be used on a wide variety of rubber, plastic and metal surfaces. Provides a seal against water & oils and can join lightweight components in many maintenance and engineering areas.
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
BONDLOC® Engineers 15pcs Kit. Packed with 15 different products which have been carefully selected for even the most demanding engineer. Comes in a tough, reinforced plastic case with foam interior. Contains: B222 Screwlock 50ml (S.24072) B242 Nutlock 50ml B270 Studlock 50ml (S.24078) B401 Cyanoacrylate 20g (S.24080) B406 Cyanoacrylate 20g (S.24081) B454 Cyanoacrylate Gel 20g (S.24137) B574 Instant Gasket 50ml (S.24091) B577 Pipeseal 50ml (S.24093) B603 Retainer 50ml (S.24095) B641 Bearing Fit 50ml B660 Metal Fill Retainer 50ml (S.24099) B2001 Steel Epoxy Stick 114g (S.24100) B2003 Plastic Epoxy Stick 114g (S.24101) B2012 Epoxy Resin 28ml (S.24102) B5299 High Temp Silicone 200ml (S.24109).
Out of Stock (UK Delivery Only)
Shipping Costs...
|
|
Add
|
BONDLOC® Contact Adhesive (500ml). High performance, easy to use, fast drying. Bonds: Wood, Metal, Rubber and Plastic.
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
BONDLOC® Cleaner that is part of the PU Windcreen Instalation Kit (25ml).
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
Fast and permanent repairs to most plastic surfaces. Ideal for emergencies. Colour : Light Blue Viscosity : Putty Full Cure : 24 hrs Sandable : 20 mins
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
BONDLOC® 2 pc Glazing Kit. Kit consists of: 25ml PU Primer (S.24124) 310ml WSPU Sealant (S.24128).
In stock (for UK mainland delivery only)
Shipping Costs...
|
|
Add
|
|