Pipe Seal Compounds

Thread Sealant - low strength. Ideal for use on threaded plastic or plastic\metal fittings carrying hot or cold water.
LOCTITE® SI 5331 is designed for the locking and sealing of plastic and metal fittings carrying hot or cold water, e.g. industrial and agricultural plastic water pipe systems or drainage systems. It carries certain approvals and certifications: WRC listed, meets BS 6920 for potable water: 0706521 DVGW approval, tested in accordance with EN 751-1; P1 NSF Reg. No.: 123620
General purpose liquid thread sealant for sealing metal and plastic threads in fittings carrying hot or cold water
WRC listed, meets BS 6920 for potable water: 0706521
Locks connection against vibration-induced loosening
P1 NSF Reg. No.: 123620
DVGW approval, tested in accordance with EN 751-1

Bondloc B577 is a yellow, medium strength anaerobic sealant formulated with Teflon designed for the locking and sealing of metal pipes and fittings.
The product cures when confined in the absence of air between close-fitting metal surfaces. Fills the space between threaded parts and seals and locks at the same time.
B577 provides an instant low pressure seal, does shrink or creep and seals all types of threaded connections.
Excellent chemical or solvent resistance to ethanol, motor oil, unleaded petrol, acetone and brake fluid. Ideal for large fittings, sprinklers system, water and gas line fittings.
Colour: Yellow
Viscosity: 80,000 - 90,000cps
Breakaway Strength:Less than 11Nm (ISO 10964)
Full Cure Time: 6 - 12 hours
Fixture Time: Less than 10 mins with activator
Min Max Temp: -55°C - +180°C