Workshop Chemical Products

Multi purpose maintenance lubricant
Permanently attached straw, sprays two ways due to dual action
Delivers the lubricant quickly and effectively
Lubricates, protects, cleans, displaces water and penetrates loosens rusted parts

BONDLOC® B242, B270, B2001, B3294, B401, B542, B567, B574, B577, B603, B641& RVT123.
With a selection of 12 different products in small pack sizes this compact case is ideal for handing out to all MRO engineers as an emergency adhesive kit. Carefully selected to cover the widest range of applications with handy pack sizes that are ideal for small jobs this low cost kit is perfect for anyone that wants an adhesive kit “just in case” of an emergency.
Contents:
B242 Nutlock 10ml
B270 Studlock 10ml
B2001 Steel Epoxy Stick 50g
B3294 Plastic Weld 28ml
B401 Cyanoacrylate Adhesive 20g
B542 Hydraulic Seal and Locker 10ml
B567 Stainless Steel Pipe Seal 50ml
B574 Instant Gasket 50ml
B577 Pipeseal 50ml
B603 Retainer 10ml
B641 Bearing Fit 10ml
RTV123 Silicone 80ml

BONDLOC® Display Stand for B2001 (S.128795) Steel Epoxy Putty complete with x24 50g sticks.
B2001 is a hand kneadable, speciality epoxy putty that mixes in 1 minute for permanent repairs to many substrates.
Contains fading black dye that becomes grey after mixing.
May be applied under water (fresh or salt).
Bonds to fibreglass, metal, wood, concrete and glass.
Will not yellow with exposure to UV.
Applications: Repairing tanks and drums, patching holes in pipes, stopping leaks and repairing porosity holes in castings.
Full Cure: 24 hrs
Sandable: 20 mins.

A steel-filled epoxy putty for general maintenance and repairs. For filling, rebuilding and bonding metal surfaces. Can be sanded, drilled and painted once cured.
Colour : Grey
Viscosity : Putty
Full Cure : 24 hrs
Sandable : 20 mins

BONDLOC® RTVNC Neutral Cure Silicone Adhesive, Clear (310ml).
RTVNC silicone is a single component, low modulus, oxime curing silicone sealant/adhesive.
Applications: RTVNC silicone can be used on all glazing and industrial work along with common building and construction joints. BNC silicone can be used on a wide variety of substrates including metal, wood, painted metals, glass, PVC, polycarbonate, polyacrylate and many others. RTVNC silicone conforms to BS 5889 type A.
Service temperature range: -40°C - +180°C.
Skinning Time: 5 mins 20°C

J-B Kwikweld J-B Kwik is the Strongest Kwik Set two part epoxy resin bond on the market. It contains particles of iron and steel to give it stregth and durability. J-B Kwik is an emergency solution or a permanent repair where the strength

LOCTITE® 243 is a medium strength blue threadlocking adhesive that seals and secures metal nuts and bolts to prevent loosening due to shock and vibration.
LOCTITE® 243 is a general purpose threadlocker that provides a medium strength bond. LOCTITE® 243 works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g., motor oils, corrosion prevention oils and cutting fluid.
Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
Permits disassembly with hand tools for servicing
P1 NSF Reg. No.: 123000

LOCTITE® 243 is a medium strength blue threadlocking adhesive that seals and secures metal nuts and bolts to prevent loosening due to shock and vibration.
LOCTITE® 243 is a general purpose threadlocker that provides a medium strength bond. LOCTITE® 243 works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g., motor oils, corrosion prevention oils and cutting fluid.
Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
Permits disassembly with hand tools for servicing
P1 NSF Reg. No.: 123000

Thread Sealant - medium strength. For fine threads in hydraulic, pneumatic and general fittings. Fast curing.
LOCTITE® 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The thixotropic nature of LOCTITE® 542 reduces the migration of liquid product after application to the part.
Ideal for fine threads as used in hydraulic, pneumatic & general fittings
Instant low-pressure seal
Suitable for metal threads only
Resistant to fuel, oil, coolants and hydraulic fluids
Locks connection against vibration loosening
DVGW approval (EN 751-1): NG-5146AR0855

LOCTITE® 518 is a medium-strength, general purpose gasketing product with excellent contamination tolerance. Ideal for use on casted iron, steel and aluminium flanges.
LOCTITE® 518 cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. LOCTITE® 518 fills gaps up to 0.25mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings.
Semi-flexible, medium-strength anaerobic flange gasket
For active and inactive rigid metal flanges
Cures through minor surface contamination
Adapts to flange surface irregularities and gaps up to 0.25 mm
Gel-type consistency
Seals instantly against low pressure
Reduces inventory costs – no need for large inventory of cut gaskets
Resists high pressure when fully cured
No compression set or misaligned gaskets
Easy to automate
Reduces process costs – eliminates manual assembly of conventional gaskets
NSF P1 Reg. No. 123758

Superglue 3 Suitable for use with metal, rubber and plastics. Bonds in seconds.

Flexible sealant paste that changes to a pliable, non-hardening film through solvent evaporation which seals flanges, fittings, connections, etc.
LOCTITE® MR 5922 is a black, viscous, solvent-based, slow drying, flexible setting paste that changes to a pliable, non-hardening film through solvent evaporation. It is based on resin, isopropanol and fillers. It seals flanges, fittings, connections and flexible assemblies against leakage. It increases the reliability of gasket seals and it can be used for the repair of damaged pre-cut gaskets.
Extends gasket life
Prevents leaks
Slow drying
Specifically designed to improve the sealing performance of pre-formed gaskets made of cork, metal, plastic, rubber, etc. in non-rigid assemblies
Flexible setting
Increases the reliability of gasket seals

Metal Set For repairing or filling iron, steel, brass, bronze, aluminium, copper, wood and concrete. Sets in 15 minutes. Can be drilled, filed, tapped, machined or painted. Resists temperatures up to 120°C.